Includes Buffer Tube, Castle Nut, End Plate
The Armaspec enhanced buffer tube kit contains all the necessary parts required to mount a stock assembly on to a lower receiver.
The buffer tube kit, contains a mil-spec 7075-T6 6 position buffer tube, a steel castle nut and end plate as well as a SRS™ GEN4 the enhanced multi stage recoil buffer system .
[The Stealth Recoil Spring™ SRS™ GEN4 is a self-contained multi-stage drop-in replacement for your standard buffer and spring. The SRS™ is designed to keep the buffer spring from rubbing against the inner wall of the buffer tube providing smooth, quiet operation and the second stage helps reduce the felt recoil significantly.]
SPECIFICATIONS:
- Length: 7.18"
- Actual Wight (Complete System): 7.09 oz.
- Equivalent Weight: 5.7 oz.
COMPATIBILITY:
- AR-10 in .308 and 6.5 Creedmore with carbine-length buffer tube
INSTALLATION AND MAINTENANCE:
Before installing the recoil spring, it is always a good idea to retighten the screws using either using two 3/32 hex key and fully tightening both screws at the same time or using one 3/32 hex key and using the hole in the rod for leverage.
The screws should be re-tightened every time maintenance is performed on the firearm.
The polymer bumper goes towards the rear of the firearm and the weight mass with the o-ring goes towards the bolt carrier.
- The SRS can be installed with our without the buffer retainer. Most people run the SRS without the buffer retainer for ease of maintenance.
The SRS™ comes with Red LOCTITE on the front metal stop and Blue LOCTITE for the bottom bumper, when reassembling we recommend reapplying LOCTITE.
