Haley Strategic

Haley Strategic Partners Thorax Incog Plate Carrier - Black

MSRP: $140.00
$125.00
( saved $15.00 )
No reviews yet Write a Review
Adding to cart… The item has been added
SKU:
TPC_IC-1-MD-BLK
  • $7.95 Flat Rate Shipping

  • Easy Returns

  • Safe Payments

  • The Best Products

The Thorax Incog introduces a low visibility carrier system with scalable modularity to meet the demands of changing threat levels and operating environments. The all new “TABLOC" system provides rapid attachment of the optional Incog Triple Rifle Mag Placard (Incog TRMP) without the use of protruding buckles or cumbersome MOLLE weaving.

  • Made in the USA from USA materials (Berry Compliant)

Item Comes With

(1) Thorax Incog Plate Bags

Note: Entry Systems, Placards, Entry System Accessories, and Armor are sold separately.

 

Dimensions

Thorax Incog Plate Bags

  • Plate Bag Dimension: SAPI/ESAPI Cut
  • Medium Plate Bag (single bag, empty): 10” (L) x 13” (H) x 1” (W)
  • Medium Weight: 4.4 oz
  • Large Plate Bag (single bag, empty): 10.25” (L) x 13.75” (H) x 1” (W)
  • Large Weight: 4.8 oz

Construction

  • MIL-SPEC 500D/1000D nylon laminate
  • MIL-SPEC 500D nylon
  • Thermoformed 4-way stretch nylon elastane/closed cell foam laminate
  • MIL-SPEC nylon webbing
  • 4-way stretch nylon/elastane
  • VELCRO® Brand hook and loop
  • VELCRO® Brand ONE-WRAP hook and loop
  • 1" Female Repair Buckles

Product Liability Nylon Products

This manual should be read by all persons who have or will have the responsibility for using or maintaining this product. Any warranties by Haley Strategic Partners LLC with respect to this product are voided if the product is not used and maintained in accordance with the instructions in this manual. The following are general safety warnings intended to call attention to the fundamental performance limitations and areas of the product where proper usage must be followed. Failure to use and maintain the product according to the instructions and warnings contained herein may result in the product failing to perform as designed.

FAILURE TO COMPLY WITH ANY OF THE INSTRUCTIONS OR WARNINGS WILL RESULT IN FAILURE, WHICH SUCH FAILURE MAY RESULT IN SERIOUS INJURY OR DEATH

  • Inspect the product for discoloration, chemical contamination, excessive UV light exposure, cuts, tears, damaged threads/bartacks, abrasions or cracks before and after each use. If the product fails inspection, it must be destroyed or repaired by the manufacturer before further use.
  • DO NOT alter the product in any way
  • DO NOT repair the product in any way
  • DO NOT expose the product to open flame or excessive heat (this product is not flame resistant)
  • DO NOT use this product except in its intended manner

 

 

Plate Bags

The Incog Plate Bags are constructed with 500D nylon and 4-way stretch materials that naturally form to the contours of the body significantly reducing plate carrier signature when operating in low-visibility environments. The incorporation of heavy woven elastic in the plate bag opening secures a wider range of plate thicknesses than traditional covert systems.

  • Plate Bag Dimensions: SAPI/ESAPI (refer to sizing chart)

Entry Systems

The Thorax Incog was disruptively engineered with forward and backward compatibility in mind enabling use of all Thorax Plate Carrier entry systems and accessories.

  • Thorax Elastic Cummerbunds deliver the optimal synergy between utility and comfort. Constructed using a double layer of heavy woven elastic for a snug fit that removes weight carriage from the shoulders while enabling maximum mobility during seated, standing, and dynamic movements (compression fitment accommodates all body sizes). The built-in pockets on each cummerbund were intentionally positioned under the armpit for enhanced concealment without impeding range of motion (accommodates 5.56x45, 5.45x39, 7.62x39 and 7.62x51 magazines, radios, smoke, flashbang, tourniquet and others similar sized equipment).
  • Thorax Cummerbunds provide an overt entry system with 1" MOLLE fields directly compatible with all Haley Strategic MOLLE pouches for configuration to any mission set. A hidden gusset system on each cummerbund provides storage for soft armor or hard armor side plates as well as cable management ports for routing radios, hubs and EUD cables without sacrificing MOLLE real estate. The optional Side Entry Panel (SEP) adds an entry system solution that eliminates the need to lift placards or chest rigs when entering and exiting the carrier.
  • Thorax Chicken Straps are a semi-rigid, lightweight, alternative to standard cummerbunds providing support for comprehensive loadouts of mission essential equipment. The thermoplastic construction increases stability and weight distribution and enables carriage of heavier equipment such as radios and side armor without sagging.

Placards

The Thorax Incog Triple Rifle Mag Placard (TRMP-IC) is a collaboration between Haley Strategic and Onward Research (Garand Thumb) with direct testing and feedback from the SOCOM community. The three-magazine placard comes standard with our proprietary MP2 inserts allowing secure retention of most 5.56x45, 5.45x39, 7.62x35, 7.62x39 and 7.62x51 rifle magazines without the need for bungies or flaps. The positive click-in magazine pouch delivers a smooth draw without impacting the ability to quickly reindex partial magazines during tactical reload. The MP2s are also removable, allowing the operator to place radios, laser range finders, or medical kits within the enclosed space. The TRMP includes three woven elastic pouches on the front of the placard, two pass through and a single closed pouch, creating secure storage for additional magazines, tourniquet, shock tubes, charges, maps, compass, chemlights or other essential kit while maintaining an incredibly lightweight and slim profile. If additional load out is required, the optional TRMP-AMP (Auxiliary MOLLE Panel) can be added on the front of the TRMP creating a 1/2" MOLLE field (6 Columns with 7 Rows).

Entry System Accessories

Radio communication and side armor solutions are available for all compatible Thorax Incog entry systems.

  • Padded PRC Pouch (Thorax Cummerbund and Thorax Elastic Cummerbund Radio Pocket)
  • Thorax Chicken Strap PRC Pocket (Thorax Chicken Strap Radio Pocket)
  • Cummerbund Plate Cap (Thorax Cummerbund Hard Armor Side Pocket)
  • Chicken Strap Plate Cap (Thorax Chicken Strap Hard Armor Side Pocket)

Armor

DFNDR Armor® hard armor plates are designed with a multi-curve profile to provide an ergonomic and comfortable fitting armor system that is intended to wear against your body all day. DFNDR Armor® is equipped with a state-of-the-art Trauma Mitigation Base to minimize the energy of an impact dramatically. We offer drop shipment for made to order DFNDR Armor® across a wide array of threat levels to meet the demands of all end users (LEVEL IIIA, LEVEL III+, LEVEL III X, and LEVEL IV).

  • LEVEL IIIA Defeats 9mm, 40mm, 45mm, FN 5.7x28mm, 357 Magnum, 357 SIG, and 44 Magnum threats.
  • LEVEL III+ Defeats Mild Steel Core Chinese and PS Ball Russian 7.62x39 AK-47 threats and standard lead core .308, 7.62, .223 and 5.56 threats.
  • LEVEL III X Defeats 7.62x39 API, 5.56x45 M855 A1 and 7.62x54R LPS threats. Defeats 5.56x45 M855 (SS109) Green Tip, Mild Steel Core Chinese and PS Ball Russian 7.62x39 AK-47 threats and standard steel jacketed/lead core .308 and copper jacketed/lead core 7.62, .223 and 5.56 threats.
  • LEVEL IV (Armor Piercing Rifle) Defeats a single shot of 7.62×63 APM2 at muzzle velocity. Defeats 7.62x39 API, 5.56x45 M855 A1 and 7.62x54R LPS threats. Defeats 5.56x45 M855 (SS109) Green Tip, Mild Steel Core Chinese and PS Ball Russian 7.62x39 AK-47 threats and standard steel jacketed/lead core .308 and copper jacketed/lead core 7.62, .223 and 5.56 threats.