The Vltor RE-A5 Receiver Extension is a 7-position A5 receiver extension that has experienced some scratches or dents along the way. These receiver extensions have cosmetic blemishes only but they range in location of scratch/dent and severity.
This receiver extension is designed to work with the VLTOR A5 system. It is longer than a traditional M4/AR15 carbine receiver extension, and is not compatible with standard (3.25″ OAL) carbine buffers or carbine springs. An A5/rifle length spring and VLTOR A5 buffer must be used with this receiver extension.
The outside diameter of this tube is mil-spec, and it will accept all mil-spec dimensioned M4/AR-15 type collapsible stocks. Some smaller, closed-back stocks, like the VLTOR Imod, won’t fully index into position #1 on this 7-position tube, but will on the 6-position RE-10/A5SR.
FEATURES:
- Seven position receiver extension made from impact extruded 7075 T6 aluminum
- Hard coat anodized
- Positions are numbered and are visible through the witness hole on most stocks
- Snag-free sliding of the buttstock
SPECS:
- Receiver is designed to use the VLTOR A5 spring and buffer kit only which is sold separately.
- Receiver extension is Mil-Spec dimensioned and will only accept M4 type Mil-Spec buttstocks
- Space between the seven positions of the receiver extension: 0.650”
- Weighs 4.3 oz
