The Armaspec enhanced buffer tube kit contains all the necessary parts required to mount a stock assembly on to a lower receiver.
The buffer tube kit, contains a mil-spec 7075-T6 6 position buffer tube, a steel castle nut and end plate as well as a SRS™ GEN4 the enhanced multi stage recoil buffer system .
[The Stealth Recoil Spring™ SRS™ GEN4 is a self-contained multi-stage drop-in replacement for your standard buffer and spring. The SRS™ is designed to keep the buffer spring from rubbing against the inner wall of the buffer tube providing smooth, quiet operation and the second stage helps reduce the felt recoil significantly.]
FEATURES:
SPECIFICATIONS:
- Length: 7.18"
- Equivalent Weight:
- SRS-H: 6.4 oz.
- Actual Wight - Complete System (new version with stainless steel weight):
- SRS-H: 6.6 oz.
COMPATIBILITY:
- AR-15 with carbine-length buffer tube
AR10 version is available, please find under AR10 parts.
Most bolt carriers have a rear opening of over .60″, there are a couple of bolt carriers in the market place that have a rear opening of under .60″ and will not function with the SRS.
9mm Bolt Carriers ONLY: For proper function of the SRS-9 in your 9mm rifle or pistol, the extra weight on the back of the bolt carrier needs to be removed. It is held in with a spring pin.
INSTALLATION AND MAINTENANCE:
The polymer bumper goes towards the rear of the firearm and the weight mass with the o-ring goes towards the bolt carrier.
- The SRS can be installed with our without the buffer retainer. Most people run the SRS without the buffer retainer for ease of maintenance.
The SRS™ comes with Red LOCTITE on the front metal stop and Blue LOCTITE for the bottom bumper, when reassembling we recommend reapplying LOCTITE.
