KE Arms SLT-2 Sear Link Technology AR-15 Straight Trigger

*CONTACT US FOR A SPECIAL COUPON CODE!*

The innovative KE Arms SLT-2 Straight Trigger eliminates the grittiness and heaviness common to military type AR-15 triggers. And it’s packed into a self-contained, drop-in module that any AR-15 owner can easily install into his or her rifle. Preferred by many target shooters, the straight shoe lets you place the pad of your finger exactly where you want it on the SLT-2 to produce maximum leverage with the least amount of effort.

The KE Arms crew developed an innovative "sear link" technology that eliminates the disconnector entirely to produce constant engagement between the sear and hammer for a smooth, gratifyingly consistent pull. The SLT-2’s reset is ultra-fast, so fast lightning quick follow-up shots are a given. And there’s less wear, too, so your trigger lasts longer, too.

• There is no disconnector for the hammer to drive through, thus creating a more efficient cycle of the bolt simply pushing the hammer out of the way as the gun fires.
• Forces of the bolt on the hammer are not transmitted into any other components of the trigger assembly.
• Constant sear engagement against the hammer means the trigger is always ready to reset and fire.

• Due to the unique geometry of the trigger, the safety can always be applied regardless of the hammer being down or cocked. When used appropriately this adds another level of safety to administrative handling and clearing of malfunctions.

• Moving parts are sealed in the underside of the housing making it less susceptible to fouling and debris.

• No impact on moving internal parts increases longevity of the trigger system.

• The SLT Series has been tested thoroughly with traditional AR calibers and pistol caliber blow back systems. It has also been tested in the Sig Sauer MPX with no damage.*

INSTALLATION

• The SLT-2 Drops into mil-spec fire control pockets and is retained with standard fire control pins captured by springs inside the housing bushings.
• *While we have sucessfully tested the SLT-2 with Tula and Wolf ammunition in .223, .308, and 9mm, we have NOT tested it with 7.62x39mm com bloc surplus with hard primers.

Unit Weight 0.15 Pounds

The SLT Series of triggers is not compatible with:

• Combloc 7.62x39mm Ammo
• Sig Sauer MCX with Firing Pin Safety Features
• .22 Rimfire kits with firing pin springs (DO NOT REMOVE YOUR FIRING PIN SPRING!)

The SLT-2 shares the same SLT technology and features of the SLT-1