The PNW attaches to our Atlas adapters, making them compatible with most suppressors on the market. Please note these are not compatible with all suppressors. The length may be too long for the blast chamber of your suppressor. Ex. Q suppressors, Silencer Co Velos, etc. If you are unsure, we’re happy to help. The PNW uses a 13/16 wrench. The PNW can be used to bring a 13.9″ barrel to 16″ length. If using this to pin and weld a 13.7″ barrel, you must use a precision washer of at least .030″ to meet the required 16″.
The PNW attaches to our Atlas adapters, making them compatible with most suppressors on the market. Please note these are not compatible with all suppressors. The length may be too long for the blast chamber of your suppressor. Ex. Q suppressors, Silencer Co Velos, etc. If you are unsure, we’re happy to help.
The PNW uses a 13/16 wrench.
The PNW can be used to bring a 13.9″ barrel to 16″ length. If using this to pin and weld a 13.7″ barrel, you must use a precision washer of at least .030″ to meet the required 16″.
The 5/8-24 bore size is compatible with calibers up to .338 in size. The 1/2-28 bore size is intended for 5.56/.223 The PNW is NOT compatible with 350 legend, 9mm, etc
- Black Nitride Finish
- Atlas and Atlas XL Compatible
- Plan B Compatible
Weight and Length
| Thread Pitch | Weight | Length | Length Added |
| 1/2-28 | 2.9″ | 2.265 |
