Engineered for EDC performance, the ReyLight Rook Ti is equipped with triple nichia 519a 4000k LED for a max output up to 1800 lumens, housed behind a scratch-resistant TIR sapphire crystal lens – ensuring bright, reliable light and even beam in any situation.
Designed for convenience, it runs on a single 18350 rechargeable Li-ion battery of 1100 mAh with a standard USB Type-C port in the neck for fast charging. And with the lightweight and durable aircraft-grade aluminum body, the Rook is built to withstand the toughest conditions – from camping to hiking, or simply working in the garage or walking the dog around the neighborhood.
Specifications
- Body Construction: Titanium
- Body Finish: Stonewash
- Emitters: 3* Nichia 519A (4000K)/3*Cree XPL HI (6000K)
- Lens: Sapphire
- Optics: TIR Optic Lens
- Power Source: Battery Powered
- Battery Cell Composition: Li-ion
- Battery: 1 * 18350 1100mAh 3.7V Rechargeable Battery (included)
- Charging Type: USB-C
- Max Output (Nichia): 1800 lumens
- Light Source Type: LED
- Waterproof: IPX7(1M)
- Weight: 3.1 oz (88g) with battery
- Length: 3.2’’ (81mm)
- Head Diameter: 0.9’’ (24mm)
- Clip: Titanium
- LIFETIME WARRANTY
Flashlight Modes:
- Group1: (Moonlight)-2%-20%-100% ( Default)
- Group2: (ML)-10%-40%-100%
- Group3: (ML)-2%-10%-50%
- Group4: (ML)-50%-100%-strobe-SOS
Create one-of-a-kind flashlight
7 tritium slots (1.5*6mm) in total. Tritium vials are not included.
Programming guide
- To Enter Configuration Mode:
-From ON, half-click/tap the tail switch 8+ times until it starts to flash.
(When the configuration mode is entered, the light will start to blink once, then a quick flash, blink twice, then a quick flash, blink three times, then a quick flash, blink four times, then a quick flash, blink five times, then a quick flash. This sequence continues twice if a selection is not chosen)
*The number of blinks indicates the configuration option number to be changed.
* Half-click/tap the tail switch during any quick flashes following the blinks to select the configuration option.
-Here are the configuration options:
- Mode group selection
(After entering this menu, you can see it blink 4 times. The number of blinks indicates the number of mode groups)
The 1st blink --------- Group1: (Moonlight)-2%-20%-100%
The 2nd blink -------- Group2: (Moonlight)-10%-40%-100%
The 3rd blink -------- Group3: (Moonlight)-2%-10%-50%
The 4th blink -------- Group4: (Moonlight)-50%-100%-strobe-SOS
*Half-click/tap the tail switch during any blinks to select the mode group.
*After selecting the mode group, you can half-click/tap to select the brightness mode.
- Memory mode on-off toggle (default off)
To turn memory mode on, half-click/tap the tail switch during the quick flash after the second blink.
*To turn off the memory mode, reenter the configuration mode and repeat the instruction above.
- Moonlight mode off-on toggle (default on)
To turn the moonlight off, half-click/tap the tail switch during the quick flash after the third blink.
*Repeat to turn the moonlight on.
- Mode order toggle (default LMH)
To change the mode order from Low Medium High to High Medium Low, half-click/tap the tail switch during the quick flash after the fourth blink.
*Repeat to reverse the order.
For example, the default mode order of group 1 is (Moonlight)-2%-20%-100%, if you change the mode group to HML, the mode ORDER of group 1 will be (Moonlight)-100%-20%-2%
- Factory reset
Half-click/tap the tail switch during the quick flash after the fifth blink to reset all options to their original states.
