Amend2 Mohave K Handstop Fits M LOK Rails Matte Finish Black AGKBLK AMAGKBLK UPC 749355071531
Product Description
The Amend2® Mohave-K™ M-LOK® Handstop (SKU: AGKBLK / UPC: 749355071531) delivers aggressive support-hand indexing, repeatable C-clamp weapon control, and positive barricade bracing in an ultralight polymer footprint. Engineered in a direct collaboration between Amend2 and Republic of Arizona Research LLC (RAZR), the Mohave-K translates the proven geometry and traction profile of RAZR's billet aluminum Mohave grip into a featherweight, high-strength nylon platform built for high-tempo carbine work.
Injection-molded in the USA from impact-modified, high-performance nylon polymer, the Mohave-K shrugs off extreme barrel heat, hard barricade impacts, and harsh gunsmithing chemicals without cracking or transferring heat into the shooter's support hand. Deep horizontal sawtooth ribbing along both the leading and trailing edges combines with high-friction stippled side panels to lock the rifle firmly into the shooter's shoulder pocket during rapid target transitions—even when operating in rain, mud, or heavy tactical gloves.
Featuring a snag-free, swept-back profile with a central structural lightening window, the Mohave-K mounts directly to any standard M-LOK handguard at the 6 o'clock, 3 o'clock, or 9 o'clock position. Whether acting as a protective muzzle-end index stop on a compact short-barreled build or serving as a rigid pull-stop on a full-length duty rifle, the Amend2 Mohave-K maximizes weapon leverage with virtually zero weight penalty.
*Armorer Bench Notes & Real-World Staging Guidance:*
Fitment Matrix: Direct-fit for all aluminum and polymer handguards equipped with Magpul® M-LOK® standard accessory slots. CRITICAL CLEARANCE & TORQUE WARNING: Before tightening M-LOK T-nuts on slim free-float handguards, visually verify that the tips of the mounting screws and T-nuts do NOT contact the barrel or low-profile gas block underneath the rail, as contact will degrade barrel harmonics and accuracy. Torque M-LOK fasteners to 30–35 in-lbs on aluminum handguards (or 15 in-lbs on polymer handguards).
- Ensure the host firearm is completely clear, magazine removed, and chamber visually and physically verified empty before beginning accessory installation.
- Thread the included M-LOK T-nuts onto the mounting screws through the base of the Amend2 Mohave-K handstop until the T-nuts sit just loose enough to pass through your chosen M-LOK rail slot.
- Insert the Mohave-K T-nuts into the desired 6 o'clock M-LOK slot on your handguard and push the handstop slightly forward (or rearward) against the recoil lugs of the slot to eliminate fore-and-aft play.
- Apply a small drop of medium-strength (Blue 242) threadlocker to the screw threads and tighten the fasteners while ensuring each T-nut rotates a full 90 degrees to bridge and lock perpendicular across the inside of the M-LOK slot.
- Torque fasteners evenly to 30–35 in-lbs (aluminum rails) and inspect the interior of the handguard to confirm clean clearance between the T-nuts, gas tube, gas block, and barrel contour.
Key Features
- Amend2® x RAZR Collaborative Geometry: Captures the ergonomic index angle and aggressive traction of the billet RAZR Mohave series in an ultralight, thermally insulated polymer body.
- High-Performance Nylon Construction: Injection-molded composite resists impact fractures, abrasion, and extreme temperatures while weighing only 1.1 ounces with hardware.
- Dual-Edge Sawtooth Ribbing: Deep horizontal ribs on the front and rear faces allow the shooter to either pull the carbine into the shoulder pocket or brace firmly against VTAC barricades.
- Direct M-LOK® Mounting System: Includes black-oxide steel M-LOK screws and camming T-nuts for rock-solid, low-profile attachment without bulky rail adapters.
- Made in the USA: Proudly manufactured in Idaho, USA, and backed by Amend2's Limited Lifetime Warranty.
Product Specifications
- Brand: Amend2® (In Collaboration with RAZR)
- Model/Series: Mohave-K™ Handstop
- MPN / SKU: AGKBLK / AMAGKBLK
- UPC: 749355071531
- Mounting Interface: M-LOK® Direct Attach
- Platform Compatibility: AR-15, AR-10, PCC, & M-LOK Equipped Handguards
- Material: High-Performance Reinforced Nylon Polymer
- Finish / Color: Matte Black w/ Ribbed & Stippled Texture
- Included Hardware: M-LOK® Mounting Screws & T-Nuts
- Country of Origin: USA
