Badger Ordnance Condition One Max Mount 34mm w 0 MOA 154 Tall Height Anodized Black Finish 154 340KB UPC 850037704286
Product Description
The Badger Ordnance® Condition One MAX Mount 34mm 1.54" 0 MOA in Anodized Black (SKU: 154-340KB / UPC: 850037704286) represents the pinnacle of extreme-duty scope mounting architecture for long-range precision shooters, tactical snipers, and extreme-caliber operators. Purpose-built to handle the severe dual-axis recoil impulses of magnum bolt-action rifles, large-frame gas guns, and anti-materiel platforms, the Condition One MAX departs from standard cantilever geometry by utilizing a non-cantilevered, ultra-rigid chassis anchored to the host receiver rail by four precision-machined Torx crossbolts.
Precision CNC-machined in the United States from certified 7075-T6 aircraft-grade aluminum, the 154-340KB provides an ideal strength-to-weight ratio without introducing unnecessary bulk to your weapon system. The mount is treated with a durable MIL-A-8625 Type III Class 2 Hardcoat Anodized matte black finish that defends against harsh field abrasions, heavy carbon fouling, and chemical solvent degradation. Positioning your 34mm optic at a standard 1.54-inch centerline height with a flat 0 MOA bias, it aligns naturally with precision rifle chassis and standard flat-top receivers without requiring exaggerated cheek riser elevation.
As the cornerstone of Badger Ordnance's Condition One Modular Mount (COMM) ecosystem, the MAX mount allows shooters to attach secondary sighting systems and mission-critical telemetry devices directly to the optic base. With pre-machined mounting points that accept the C1 J-Arm, 12 o'clock Accessory Ring Caps (ARC), angle cosine indicators, and laser rangefinder mounts, the C1 MAX eliminates the need for bulky rail-mounted offset brackets while preserving true zero retention across extreme thermal and vibrational shifts.
*Armorer Bench Notes & Real-World Staging Guidance:*
Fitment Matrix: Direct mounting to standard MIL-STD-1913 Picatinny rails. Accommodates all rifle scopes with 34mm main tubes and objective bells up to 56mm. Non-cantilever design is optimized for precision bolt-action rifles, continuous top-rail chassis, and monolithic receiver platforms. Torque specs: Base crossbolt nuts require 65 in-lbs using a T25 Torx driver or 1/2" socket; ring cap T15 screws require 15–18 in-lbs. Do NOT exceed 18 in-lbs on scope ring caps.
- Ensure the host rifle is completely clear, magazine removed, and chamber visually and physically verified empty.
- Clean the upper receiver Picatinny rail and the underside of the mount base to eliminate oil, carbon, or debris.
- Place the C1 MAX mount onto the rail, apply forward hand pressure to seat the recoil lugs against the forward rail slots, and torque the four base clamp nuts to 65 in-lbs in an alternating sequence.
- De-grease scope ring surfaces, place the 34mm optic into the lower cradles, establish proper eye relief, and level the reticle using a precision bubble level or feeler gauge set.
- Install the top ring caps and hand-tighten the T15 ring screws with light thread engagement; torque evenly in an alternating X-pattern to 15–18 in-lbs while maintaining equal ring gaps on both left and right sides.
Key Features
- Condition One MAX Architecture: Non-cantilevered design engineered specifically for extreme-recoil magnum calibers and continuous rail chassis.
- 4-Crossbolt Heavy Clamping System: Quadruple recoil lugs maximize surface clamping force and eliminate zero shift under heavy magnum recoil.
- 34mm Maintube Compatibility: Accommodates elite long-range precision optics and tactical high-magnification variable scopes.
- 1.54" Optical Centerline Height: Delivers standard inline optical alignment for precision stocks and adjustable chassis cheekpieces.
- 0 MOA True Flat Bias: Ideal for setups where the host receiver or chassis already incorporates built-in 20, 30, or 45 MOA elevation bias.
- 7075-T6 Aerospace Aluminum: Delivers exceptional structural rigidity and fatigue endurance under heavy operational use.
- MIL-A-8625 Type III Hardcoat Anodize: Deep matte black military-spec finish offers superior corrosion, weather, and abrasion protection.
- Modular Ecosystem Ready: Directly accepts Condition One J-Arms, 12 o'clock ARCs, anti-cant levels, and data cards.
- Made in the USA: Proudly designed, CNC-machined, and hand-inspected in the United States by Badger Ordnance.
Product Specifications
- Brand: Badger Ordnance®
- Model/Series: Condition One MAX Mount (COMM MAX)
- MPN / SKU: 154-340KB / 154-340KB
- UPC: 850037704286
- Ring Diameter: 34mm
- Optical Centerline Height: 1.54 Inches (Standard Inline)
- Mount Cant / Bias: 0 MOA
- Mount Type: 4-Crossbolt MIL-STD-1913 Picatinny Clamp
- Platform Compatibility: Precision Bolt Action Rifles, AR-10, Monolithic Rail Platforms
- Material: 7075-T6 Billet Aerospace Aluminum
- Coating / Finish: MIL-A-8625 Type III Class 2 Hardcoat Anodized Black
- Hardware: Steel Grade 8 Torx Crossbolts & Ring Screws
- Country of Origin: United States
