Badger Ordnance Condition One Modular Mount 30mm 1.70 Inch Black 0 MOA SKU 170 300B UPC 676538348725
Product Description
The Badger Ordnance Condition One Modular Mount (C.O.M.M.) 30mm 1.70" in Black (SKU: 170-300B / UPC: 676538348725) is the benchmark unibody optical mounting platform engineered specifically for modern combat rifles and precision carbines. Developed to eliminate the mechanical deficiencies of traditional add-on scope rings and stacked riser blocks, the Condition One acts as a unified hub for your entire upper receiver optical suite. By positioning 30mm main-tube Low Power Variable Optics (LPVO) at a 1.70" lower 1/3 optical centerline height, this mount provides an immediate, ergonomic sight picture that balances rapid heads-up target acquisition with rock-solid cheek weld integrity during rapid-fire strings.
Precision CNC-machined from solid billet 7075-T6 aluminum, the Condition One achieves unmatched structural rigidity while preserving a lightweight 6.3-ounce footprint. The entire unibody base and ring assembly are treated with a non-reflective MIL-A-8625 Type III Class 2 Hardcoat Anodize to withstand harsh chemical solvents, abrasive field grime, and extreme environmental exposure. Dual integrated cross-bolt recoil lugs interface squarely with MIL-STD-1913 Picatinny rails, preventing zero shift, mechanical shear, or optical tube deflection under continuous 5.56 NATO, .308 Winchester, and heavy magnum recoil impulses.
Engineered around true modularity, the C.O.M.M. chassis incorporates four dedicated accessory mounting points positioned fore and aft on both lateral sides. This interface allows seamless integration of the Condition One J-Arm and Micro Sight Mounts for 35-degree and 45-degree offset secondary reflex sights (Aimpoint Micro, Trijicon RMR, Leupold DeltaPoint Pro) as well as 12 o'clock Accessory Ring Caps (ARC) for top-mounted lasers, rangefinders, or thermal indicators. The 1.70" centerline height provides clearance over receiver-mounted top-rail laser aiming modules (ATPIAL/PEQ-15, NGAL, MAWL-C1+) without obscuring the scope’s primary objective view.
*Armorer Bench Notes & Real-World Staging Guidance:*
Fitment Matrix: Direct fitment on MIL-STD-1913 Picatinny rails for AR-15, AR-10, M4, SR-25, and bolt guns with continuous 1913 top rails. [CRITICAL: Do NOT mount to non-standard Weaver rails. Torque cross-clamp rail nuts to exactly 65 in-lbs using a calibrated torque wrench. Torque ring cap T15 Torx fasteners in an alternating cross-pattern to 15-18 in-lbs dry; do NOT over-torque or strip aluminum threads. Verify scope tube is clean and dry prior to seating; do NOT bed rings with liquid threadlockers.]
- Ensure the host firearm is completely clear, magazine removed, and chamber visually and physically verified empty.
- Degrease the receiver Picatinny top rail and mount clamping surfaces using isopropyl alcohol to ensure zero slip.
- Place the C.O.M.M. onto the desired receiver slots, push the mount firmly forward toward the muzzle to seat the integrated recoil lugs against the rail lugs, and torque the cross-clamp nuts to 65 in-lbs.
- Set the 30mm riflescope into the lower saddle, establish optimal eye relief, level the reticle using an Arisaka optic leveler or plumb bob, and install the ring caps.
- Evenly torque the ring cap screws in an alternating X-pattern to 15-18 in-lbs, verify consistent gap spacing on both sides of each ring cap, perform an eye-relief function check, and conduct live-fire zero confirmation.
Key Features
- Optimized 1.70" Lower 1/3 Centerline: Delivers the natural head position of lower 1/3 red dots to LPVOs, clearing top-mounted PEQ/NGAL illuminators and facilitating passive night vision sight alignment.
- Billet 7075-T6 Aerospace Aluminum: Yields maximum tensile strength and mechanical rigidity without unnecessary mass penalty.
- Integrated Dual Recoil Lugs: Anchors firmly into MIL-STD-1913 slots, eliminating forward and rearward movement under heavy firing schedules.
- Full Modular Architecture: Direct-mount connection points on left, right, fore, and aft positions for J-Arms, 35/45-degree offset optics, and ARC ring caps.
- MIL-A-8625 Type III Hardcoat Anodize: Provides a durable, glare-resistant matte black finish resilient against corrosion, UV breakdown, and field chemicals.
- 0 MOA Neutral Cant: Ideal for carbine setups, mid-range DMR platforms, and LPVOs where maximum down-elevation dial travel is prioritized.
Product Specifications
- Brand: Badger Ordnance®
- Model/Series: Condition One Modular Mount (C.O.M.M.)
- MPN / SKU: 170-300B / 170300B
- UPC: 676538348725
- Main Tube Diameter: 30mm
- Optical Centerline Height: 1.70" (Lower 1/3 Height)
- Cant / Inclination: 0 MOA / 0 MRAD
- Material: 7075-T6 Billet Aluminum Alloy
- Finish: Type III Class 2 Hardcoat Anodized (Matte Black)
- Mounting Interface: MIL-STD-1913 Picatinny Rail
- Fastener Specs: Rail Clamps (65 in-lbs) / Ring Cap Screws (15-18 in-lbs)
- Country of Origin: United States of America
