*CONTACT US FOR A SPECIAL COUPON CODE!*
Benchmade® Adamas® 275SFE-04 Full-Size Tactical Folding Knife – CPM-MagnaCut Stainless Super Steel – Serrated Drop Point FDE Cerakote Blade – Milled OD Green G-10 Handles – AXIS® Lock – 275SFE-04
Product Description
The Benchmade® Adamas® Manual AXIS® Lock Full-Size Tactical Folding Knife (275SFE-04) represents the absolute zenith in overbuilt field-cutlery logistics, high-stress tactical component optimization, and zero-fail defensive staging, masterfully manufactured in Oregon City, Oregon, USA. Custom-conceived by world-renowned custom tactical knifemaker Shane Sibert, the Adamas lineage has long served as the definitive, unyielding "pocket tank" for frontline combat personnel, tactical law enforcement operators, and backcountry survivalists. While legacy hard-use folders historically forced operators into an ongoing liability loop—sacrificing corrosion resistance to traditional tool steels or risking edge roll when sawing through industrial cordage—this full-scale tactical asset shatters previous limits. This specific execution (610953219383) merges legendary overbuilt frame dynamics with a generational super-steel upgrade and an aggressive combo-edge layout to handle brutal field conditions seamlessly.
The core structural superiority of this 6.54-ounce crushing utility engine relies on its premium CPM-MagnaCut stainless super steel blade. Precision-ground into an expansive 3.82-inch drop point profile with a robust 0.14-inch thick spine, the steel is professionally heat-treated to an uniform 60-62 HRC. CPM-MagnaCut represents the pinnacle of modern powder metallurgy, managing an unprecedented elemental balance that delivers spectacular edge retention and extreme fracture toughness while remaining practically immune to rain humidity, sweat acidity, and saltwater corrosion. The lower portion of the cutting edge features aggressive, razor-sharp **tactical serrations** tailored to rip through tough, high-tensile materials like vehicle seatbelts, thick nylon webbing, tow ropes, and fibrous vegetation. The entire steel tracking face is wrapped in a hard-wearing, non-reflective Flat Dark Earth (FDE) Cerakote finish that protects against abrasion while keeping glare completely suppressed.
The true operational triumph of this American-built classic lies within its **legendary AXIS® lock architecture and milled OD Green G-10 ergonomics**. The fully ambidextrous crossbar lock is bolstered by oversized internal components and heavy-duty dual omega springs, anchoring the blade tang against structural failure under severe spine-whack shocks or dynamic prying forces. The blade rides over ultra-smooth, low-friction phosphor-bronze washers, deploying instantly via dual thumb studs. The 0.63-inch thick handle scales are precision CNC-machined from high-rigidity Olive Drab Green G-10 fiberglass composite over skeletonized, hardened stainless steel internal liners. Detailed with lateral weight-relieving speed holes and deep finger grooves, the frame provides an unyielding palm registration that fills heavy tactical gloves perfectly. Completed with a low-profile deep-carry pocket clip and an included **MOLLE-compatible tan ballistic nylon sheath**, this 275SFE-04 model grants you total tactical authority over your operational environment.
Includes: (1) Authentic Benchmade Adamas 275SFE-04 Full-Size Tactical Folding Knife (OD Green Milled G-10 Handles, FDE Cerakote CPM-MagnaCut Serrated Blade, Ambidextrous Deep-Carry Pocket Clip), and (1) Premium Tan Ballistic Nylon MOLLE-Compatible Belt Sheath with Malice Clip, Packed in Original Branded Factory Sealed Black Class Retail Presentation Boxing.
*Administrative Tuning, Cordage Extraction & Safety Compliance Guidance: The Benchmade Adamas 275SFE-04 is a strictly manual-opening folding tool operating via ambidextrous dual thumb studs. Because it contains no internal leaf springs or automatic actuators, this high-stiffness tactical asset is fully legal for carriage and transport across an expansive framework of municipal jurisdictions that explicitly ban automatic switchblades. To preserve its smooth kinetic deployment arc, periodically blast out internal pocket lint using compressed air and apply a minute drop of low-viscosity pivot oil onto the internal phosphor-bronze washers. The specialized serrations on this CPM-MagnaCut core provide long-lasting sawing geometry; when fine-tuning eventually becomes required, utilize a specialized ceramic or diamond sharpening rod matched exactly to the serration scallop arcs at a precise 17-degree angle. Always physically ensure your fingers are completely clear of the liner path before drawing back the crossbar lock to fold the blade shut on your armorer bench.
Key Features
- Premium CPM-MagnaCut Super Steel: Elite American powder metallurgy eliminates the historical compromise between edge longevity, fracture toughness, and total corrosion resistance.
- Aggressive Tactical Serrations: Deeply cut scallops on the lower half of the drop point blade provide instantaneous, high-leverage shearing authority through thick webbing and heavy ropes.
- Unconquerable AXIS® Lock System: Fully ambidextrous crossbar locking array handles intense vertical loading pressure and extreme field impact loops with rock-solid consistency.
- Milled OD Green G-10 Scaling: High-tensile Olive Drab Green G-10 handles feature skeletonized speed holes and a textured surface to lock down a slip-resistant master grip under wet conditions.
- Flat Dark Earth Cerakote Shield: Tough ceramic-based FDE blade coating blocks tactical glare, reduces slicing friction, and prevents micro-scratches from hard trail use.
- Complete Modular MOLLE Sheath: Arrives with a heavy-duty, tan ballistic nylon tactical carry pouch complete with a Malice clip for rapid mounting onto plate carriers or duty belts.
Product Specifications
- Brand: Benchmade® Knife Company (Precision engineered, machined, and hand-fit natively in Oregon City, Oregon, USA)
- Product Line: Black Class Professional Tactical Arrays & Severe-Duty Field Folders
- Model Series Designation: Adamas® Manual Folding Knife – Full-Size MagnaCut FDE/OD Green Edition
- SKU / MPN: 275SFE-04 (Cross-Family Identifiers: 275SFE04 / BM275SFE-04 / 275GY-03 Core Kinship)
- UPC Barcode Number: 610953219383
- Knife Opening Action: Manual Ambidextrous Dual Thumb Stud Deployment
- Locking Mechanism Framework: Patented Oversized AXIS® Crossbar Lock with Dual Internal Omega Springs
- Blade Overall Physical Length: 3.82 Inches (9.70 cm) High-Stiffness Tactical Utility Deck
- Blade Spine Thickness Profile: 0.140 Inches (3.56 mm) Heavy-Duty Prying Ridge
- Blade Steel Metallurgy Base: Premium CPM-MagnaCut Stainless Super Steel Billet
- Rockwell Hardness Index: 60 - 62 HRC Factory Standard Calibration
- Blade Style Taper Contour: Drop Point with Functional Fuller Channel and High Flat-Ground Swedge
- Blade Finish Armor Coating: Non-Reflective Tactical Flat Dark Earth (FDE) Cerakote Finish
- Edge Type Profiling: Combo Edge (Partially Serrated Secondary Scallop Geometry)
- Closed Handle Length: 5.20 Inches (13.21 cm) Standard Tactical Profile
- Handle Overall Structural Thickness: 0.63 Inches (16.0 mm) Volumetric Palm Fill Frame
- Handle Scaling Material: High-Rigidity Injection-Milled Textured Olive Drab (OD) Green G-10 Composite
- Chassis Liners Class: Overbuilt Skeletonized Hardened Stainless Steel Internal Plates
- Pocket Clip Configuration: Black Oxide Coated Stainless Steel (Ambidextrous, Tip-Up Deep Carry)
- Product Net Component Weight: ~6.54 oz (~185.41 g) - Tactical Hard-Use Mass Footprint
- Tactical Belt Sheath Weight: ~1.50 oz (~42.52 g) Ballistic Nylon Framework
- Total Packaging Shipping Weight: ~0.85 lbs (Enclosed Inside Benchmade Black Class Protective Foam Boxing)
- Factory Warranty Status: Backed by Benchmade’s Lifetime Warranty & Free Lifetime LifeSharp® Services
