Beretta Factory OEM APX Series Replacement Magazine - 10-Round Capacity - Fits Full-Size APX Platforms - 9mm Luger, Restricted State Compliant Steel - JMAPX109
Product Description
If you live in a jurisdiction with strict magazine capacity limits, finding a reliable, law-compliant feeding system that doesn't compromise on durability can be a challenge. Standard high-capacity clips are often permanently pinned or fitted with brittle plastic blocks that alter the spring tension and compromise factory feeding speeds. The **Beretta® Factory OEM APX 9mm 10-Round Magazine (JMAPX109)** is engineered straight from the factory to solve this problem. It features a custom-dimpled side channel restriction that maintains ideal 10-round load limits while preserving uncompromised, full-power duty springs.
Proudly stamped and finished in Italy by Beretta’s elite manufacturing division, this factory replacement module is cut from premium, heat-treated structural carbon steel sheet metal. It is wrapped in a specialized glossy black anti-friction and anti-corrosion coating, allowing the magazine to slide freely from the grip well during high-speed, drop-free emergency reloads. The internal configuration features a high-visibility, anti-tilt polymer follower paired with a premium music wire coiled spring. This guarantees continuous, perfectly level upward pressure to guide the standard 9x19mm Parabellum stack flawlessly into the chamber without nose-dives or failures to feed.
Finished with a flush-fit, impact-absorbing polymer floor plate that matches the lower receiver frame contours seamlessly, this genuine OEM component provides absolute law compliance and maximum feeding confidence under rigorous field or defensive conditions.
*Armorer Bench Notes & Real-World Staging Guidance: The Beretta JMAPX109 factory replacement magazine arrives complete and individually preserved inside its original retail hang-card blister package. CRITICAL CO-DEPENDENT HANDGUN FITMENT MATRIX: This specific full-length magazine tube is engineered natively to lock into full-size Beretta APX and APX A1 series pistols chambered in 9mm Luger. Frame Length Tuning Guide: Because this features a full-size frame overall tube length, it will insert and lock securely into smaller compact or Centurion APX 9mm variants on your workbench (extending past the bottom rim of the shorter grip). However, **it will not fit sub-compact APX models or standard APX .40 S&W frame configurations** due to separate internal case tracking dimensions. It is also entirely incompatible with alternative Beretta lines like the 92FS/M9, PX4 Storm, or APX Carry single-stack lines. Field Maintenance Advice: After executing rapid-reload drills onto sandy, dusty, or muddy training bay floors, always field strip your magazine for bench maintenance. Depress the bottom locking insert stub, slide off the polymer baseplate, and drop out the internal spring and follower layout. Wipe the inner walls completely dry using a clean cotton patch; never leave defensive magazine interiors soaked with liquid gun oils or penetrants, as sticky oils trap abrasive powder soot, leading to follower binding and failure-to-feed issues downrange.*
Key Features
- Genuine Beretta Factory OEM: Formulated and manufactured in Italy to exact blueprint specifications, ensuring flawless frame lockup and positive slide-stop activation.
- Restricted State Compliant: Engineered natively from the factory with a 10-round capacity configuration to remain 100% compliant in capacity-restricted jurisdictions.
- Heavy-Duty Carbon Steel Tube: Precision-stamped from premium, heat-treated structural steel wire and sheet matrices to prevent body wall deflection under full spring load.
- Anti-Friction Glossy Finish: Coated in a sleek, slick polished black jacket that resists environmental corrosion and ensures rapid, slick drop-free extraction.
- Anti-Tilt Low-Friction Follower: Outfitted with an advanced polymer follower designed to glide evenly along the inner walls, eliminating shell dipping or nose-dives.
- Impact-Absorbing Baseplate: Completed with a heavy-duty, removable polymer floor plate that shrugs off hard drops onto concrete workspace floors.
Product Specifications
- Brand: Beretta® (Gardone Val Trompia, Italy / Accokeek, Maryland)
- Model Line: Factory OEM Replacement Small Parts & Handgun Feeding Accessories
- MPN/SKU: JMAPX109 (Also cataloged as JMAPX109-PK)
- UPC Code Profile: 082442873466
- Handgun Platform Fitment: Beretta® APX / APX A1 Full-Size Duty Pistols Only
- Standard Round Capacity: 10 Rounds (State compliant double-stack full-length tube configuration spec)
- Compatible Cartridge Caliber: 9x19mm Parabellum (9mm Luger Performance Ammunition)
- Magazine Tube Material: Premium Heat-Treated Heavy-Gauge Structural Carbon Steel
- Follower Component Style: Black Anti-Tilt Self-Lubricating Low-Friction Polymer Follower
- Baseplate Cushion Element: Removable Flush-Fit Impact-Resistant Polymer Floor Plate
- Internal Spring Configuration: High-Tension Tempered Music-Wire Coiled Spring Matrix
- Exterior Finish Dressing: Anti-Friction Advanced Non-Reflective Satin Black Shield Coating
- Full Kit Component Checklist: Completed Steel 10-Round Magazine Assembly (Tube, Spring, Inner Insert, Follower, Baseplate), Factory Retail Pack
- Packaging Format Class: Genuine Beretta Branded Factory Hang-Card Clamshell Blister Packaging
- Product Type Category: Handgun Components / Pistol Ammunition Feeding Magazines
- Overall Unit Height Profile: Full-Size Duty Grip Length Extension Profile
- Net Component Module Mass: ~3.20 Ounces (~90.7 Grams Empty Steel Unloaded Operating Mass)
- Country of Manufacture: Proudly Crafted to World-Class Tolerances in Italy
- Warranty Tracking Protection: Fully Backed by Beretta Factory Parts Warranty Cover
