*CONTACT US FOR A SPECIAL COUPON CODE*
Blue Force Gear GMT Sling The Sling with a Tail 1 Inch Webbing MultiCam GMT 100 OA MC UPC 810073651067
Product Description
The Blue Force Gear® GMT Sling® in MultiCam (SKU: GMT-100-OA-MC / UPC: 810073651067) represents a quantum leap in traditional tailed sling architecture, purpose-built to give tactical operators, patrol officers, and competitive shooters rapid, reliable tension control without the mechanical shortcomings of legacy field designs. Developed as the modern answer for shooters who demand the extreme tightening range of a tail sling—often called "Give Me Tail"—the GMT Sling delivers unmatched close-quarters retention when securing primary weapons during fast transitions, breaching operations, or hands-on suspect handling.
Engineered for relentless operational duty, the GMT Sling utilizes full-spec 1.00-inch Invista solution-dyed CORDURA® webbing assembled with industrial TEX 70 bonded nylon thread. Unlike legacy tail-style slings that rely on 1960s-era ALICE pack friction buckles with delicate coil springs that corrode, pack with grit, or snap unexpectedly, Blue Force Gear deployed over two years of research to engineer a proprietary double-locking buckle mechanism. Injection-molded from glass-reinforced DuPont Zytel® nylon, this adjuster completely resists saltwater corrosion, harsh chemical bore cleaners, extreme temperatures, and heavy impact while maintaining rock-solid webbing tension under hard recoil and vigorous movement.
Ergonomics and snag-free manipulation sit at the center of the GMT design. To cinch the rifle tightly against your kit, simply pull straight back on the webbing tail; to release and transition immediately to dynamic shooting positions, sweep forward against the integrated spherical release bead. A reinforced, sewn-in captive stop at the tail end guarantees the sling webbing will never separate or slip free through the adjuster. The open-attachment (OA) configuration provides an unpadded, streamlined profile ready to lace directly into your host weapon's factory slots or be configured with your preferred mounting hardware.
*Armorer Bench Notes & Real-World Staging Guidance:*
Fitment Matrix: Direct fit for AR-15, M4, submachine guns, pistol-caliber carbines (PCCs), and light bolt rifles equipped with 1.00-inch sling loops, buttstock sling slots, or compatible sling swivels. CRITICAL: This sling utilizes 1.00-inch open-ended webbing ends; while functional with 1.25-inch mounting hardware, pairing with 1.25-inch loops will allow slight lateral play. Dedicated 1.00-inch hardware (such as Blue Force Gear Push Button QD Swivels, ULoops, or UWLs) is recommended for optimal snag-free stability. Sling attachment hardware is NOT included and must be sourced separately. Always ensure triglides are doubled back to prevent sling slippage under dynamic load.
- Ensure the host firearm is completely clear, magazine removed, and chamber visually and physically verified empty prior to handling.
- Determine the desired front and rear mounting hardware interfaces (e.g., Push-Button QD swivels, ULoops, or stock pass-through slots) matched to 1.00-inch webbing width.
- Route the unpadded front running end through your chosen front swivel or handguard loop, pass through the front triglide, and weave the webbing back over the center bar to establish an armorer-grade double-back lock.
- Feed the rear running end through the buttstock sling slot or rear receiver swivel, thread through the rear triglide, adjust static baseline length to shooter torso dimensions, and double-back the webbing.
- Conduct dynamic sling adjustment testing by grasping the tail to cinch tight to the chest and pulling the spherical release knob forward to loosen, verifying smooth travel and weapon retention.
Key Features
- Proprietary Double-Locking Adjuster: Eliminates legacy metal spring buckles in favor of an advanced DuPont Zytel® nylon mechanism that will not rust, jam, or shear under dynamic loading.
- Rapid Tactile Spherical Release: Intuitive spherical release bead provides instantaneous loosen-on-demand adjustment even when operating in full winter gloves or low-light tactical environments.
- Captive Tail Security: Heavy-duty sewn stop at the tail tip guarantees the sling will never slip completely out of the adjuster or drop your weapon during rapid tension adjustments.
- Invista Solution-Dyed CORDURA® Webbing: Delivers superior abrasion resistance, low-friction glide through guide hardware, and authentic near-infrared (NIR) signature compliance in MultiCam.
- Lightweight Open-Attachment Design: Unpadded 1.00-inch layout offers minimal bulk and maximum versatility for mounting to receiver end plates, handguards, and buttstocks.
- Berry Amendment Compliant: 100% designed, engineered, and manufactured in the United States under CAGE Code 3X9S8.
Product Specifications
- Brand: Blue Force Gear®
- Model/Series: GMT Sling® (Give Me Tail)
- MPN / SKU: GMT-100-OA-MC / GMT100OAMC
- UPC: 810073651067
- Platform Compatibility: AR-15, M4 Carbines, Submachine Guns, PCCs, Precision Light Rifles
- Webbing Width: 1.00 in (25.4 mm)
- Adjustable Length Range: 34.0 in - 64.0 in (86.4 cm - 162.6 cm)
- Hardware Composition: Glass-Reinforced DuPont Zytel® Nylon
- Thread Type: TEX 70 Bonded Nylon Thread
- Pattern / Finish: Genuine MultiCam®
- Mounting Hardware: Open Attachment / Sold Separately
- CAGE Code: 3X9S8
- Country of Origin: United States of America
