*CONTACT US FOR A SPECIAL COUPON CODE*
Blue Force Gear Vickers 221 Sling Padded 2 To 1 Point Sling Black Push Button Swivel VCAS 2TO1 PB 200 AA BK BLFVCAS 2 1 PB 200 BK UPC 812114020085
Product Description
The Blue Force Gear® Vickers 221 Sling™ Padded in Black (SKU: VCAS-2TO1-PB-200-AA-BK / UPC: 812114020085) bridges the operational gap between traditional two-point stability and single-point CQB agility. While a two-point configuration provides superior weapon retention, muzzle control, and hands-free carry during patrol or movement, tight vehicle interiors and complex structural entries often demand immediate single-point maneuverability. By integrating Blue Force Gear's molded polymer Burnsed Socket™ directly into the rear assembly, operators can detach the front Push Button QD swivel from the handguard and lock it into the rear socket in seconds to convert from two-point to single-point mode.
Built in the USA to Berry Compliant military standards, this padded model pairs 1.25-inch Invista solution-dyed CORDURA® webbing with a permanently positioned 2.00-inch inline tubular webbing pad filled with closed-cell foam. Unlike bulky sliding shoulder pads, the inline closed-cell foam design never shifts out of place, absorbs zero water weight in wet environments, and distributes the mass of fully dressed carbines across the shoulder and trapezius. The front adjustment section incorporates glass-reinforced DuPont Zytel® nylon and ITW GhillieTex™ low-IR molded acetal hardware, anchored by the signature Quick Adjuster with a contrasting pull tab for instantaneous tensioning from transport to combat-ready stance in either 1-point or 2-point mode[cite: 2].
Outfitted with dual manganese-phosphated steel Push Button QD swivels, the VCAS-2TO1-PB-200-AA-BK mounts directly out of the package to modern carbines featuring front and rear 0.375-inch QD sling cups. The front Push Button swivel is permanently sewn into the adjustment lead for snag-free transitions, while the rear Push Button swivel and Burnsed Socket assembly weave cleanly through the rear triglides for a 57-inch to 67-inch overall length adjustment range that accommodates slick rigs or full plate carriers.
*Armorer Bench Notes & Real-World Staging Guidance:*
Fitment Matrix: Compatible with AR-15, M4, AR-10/SR-25, PCCs, and tactical shotguns outfitted with two standard 0.375-inch Push Button QD sling sockets (one forward handguard socket and one rear receiver end-plate or buttstock socket). CRITICAL: Because the front Push Button QD swivel is sewn directly into the webbing, this model will NOT attach to traditional fixed front sling loops without an aftermarket QD adapter. Firearms with rear eyelets (such as FN SCAR, SIG MCX, or HK platforms) require Blue Force Gear's Universal Wire Loop with Push Button Socket to interface with the rear assembly. For optimal 2-to-1 conversion geometry, mount the rear QD swivel to a receiver end-plate socket rather than the buttstock toe so the rifle hangs at balanced workspace height in single-point mode.
- Ensure the host firearm is completely clear, magazine removed, and chamber visually and physically verified empty before installing sling hardware.
- Inspect both the forward rail QD socket and rear receiver end-plate QD socket for debris or wear, and verify smooth plunger travel on both Push Button swivels.
- Depress the center button on the rear Push Button swivel (adjacent to the Burnsed Socket) and lock it into the rear receiver end-plate QD cup, followed by a firm tug test to verify ball-detent lockup.
- Lock the sewn-in front Push Button QD swivel into your forward handguard socket (for 2-point mode) or directly into the sling's polymer Burnsed Socket (for 1-point mode), confirming positive seating.
- Don the sling across your support-side shoulder, set the base length using the rear Zytel® triglides within the 57" to 67" range, and cycle the contrasting Quick Adjuster pull tab to confirm smooth transition between cinched carry and full firing extension.
Key Features
- Instant 2-Point to 1-Point Conversion: Integrated polymer Burnsed Socket™ accepts the front Push Button QD swivel to switch from two-point stability to single-point CQB agility without removing the sling from your body.
- 2.00" Inline Closed-Cell Foam Pad: Fixed tubular CORDURA® pad disperses heavy carbine weight without shifting, bunching, or absorbing moisture.
- Quick Adjuster with Contrasting Pull Tab: Patent-pending slider system lets you instantaneously cinch or extend sling tension in both 1-point and 2-point configurations.
- DuPont Zytel® & ITW GhillieTex™ Hardware: Glass-reinforced nylon triglides and low-IR molded acetal adjuster deliver silent, corrosion-proof durability that will not scratch receiver finishes[cite: 2].
- Dual Push Button QD Swivels Included: Ready out of the box with a sewn-in front Push Button swivel and woven rear Push Button swivel for standard QD sockets.
Product Specifications
- Brand: Blue Force Gear®[cite: 2]
- Model/Series: Vickers 221 Sling™ (Padded, 2-to-1 Point Convertible)[cite: 2]
- MPN / SKU: VCAS-2TO1-PB-200-AA-BK / BLFVCAS-2-1-PB-200-BK[cite: 2]
- UPC: 812114020085[cite: 2]
- Webbing & Pad Width: 1.25 in. Invista CORDURA® Webbing / 2.00 in. Closed-Cell Foam Pad
- Adjustment Range: 57 in. to 67 in. Overall Length
- Attachment Hardware: Dual Steel Push Button QD Swivels & Polymer Burnsed Socket™
- Adjuster & Triglide Material: DuPont Zytel® Nylon & ITW GhillieTex™ Molded Acetal[cite: 2]
- Color / Finish: Matte Black[cite: 2]
- Platform Compatibility: AR-15 / M4 / AR-10 / Shotguns / PCCs with Dual QD Sockets
- Country of Origin: United States of America (Berry Compliant)
