Bravo Company USA / BCM

Bravo Company BCMGUNFIGHTER Stock Mod 0 Complete Kit Mil-Spec Black - BCM-GFSK-MOD-0-BLK

$109.95
No reviews yet Write a Review
Adding to cart… The item has been added
SKU:
BCM-GFSK-MOD-0-BLK
UPC:
855877004954
  • $7.95 Flat Rate Shipping

  • Easy Returns

  • Safe Payments

  • The Best Products

*CONTACT US FOR A SPECIAL COUPON CODE*

Bravo Company USA BCM Gunfighter Stock Complete Kit Black BCM GFSK MOD 0 BLK UPC 812526020598

Product Description

The Bravo Company® BCMGUNFIGHTER™ Stock Mod 0 Complete Kit (SKU: BCM-GFSK-MOD-0-BLK / UPC: 812526020598) is an all-in-one Mil-Spec lower receiver extension and buttstock assembly engineered for duty AR-15 and M4 carbine builds. Combining the snag-free BCMGUNFIGHTER™ Mod 0 buttstock with BCM's aerospace-grade 7075-T6 Mil-Spec 6-position buffer tube, carbine buffer, action spring, castle nut, and BCM® QD End Plate, this complete hardware kit provides everything required to finish a stripped lower receiver or upgrade a commercial-spec carbine.

Unlike budget 6061-T6 extruded buffer tubes, the included BCM® Mil-Spec receiver extension is impact-extruded and CNC-machined in the USA from 7075-T6 aluminum with rolled threads and a MIL-A-8625 Type III Class 2 hardcoat anodized finish. Paired with a standard 3.0 oz carbine buffer, a Mil-Spec carbine buffer spring, and a manganese-phosphate coated 4140 steel QD receiver end plate, every load-bearing component is built to exceed military durability standards.

The BCMGUNFIGHTER™ Mod 0 buttstock features a streamlined, snag-free polymer body with a concealed internal latch that delivers positive position locking and zero-wobble fitment on the 1.148" Mil-Spec tube. Complete with an ambidextrous steel-lined Quick Detach (QD) socket on the stock, a secondary QD socket on the steel receiver end plate, a 1.25" web sling slot, VBOST sling tab, and a contoured rubber buttpad, this kit delivers immediate, combat-ready ergonomics straight out of the box.

*Armorer Bench Notes & Real-World Staging Guidance:*

Fitment Matrix: Direct drop-in fit for all Mil-Spec AR-15 / M4 lower receivers. CRITICAL WARNING: The included 3.25" carbine buffer and spring are calibrated for AR-15 platforms—do NOT use the included buffer/spring in AR-10 (.308) builds without substituting an AR-10-specific buffer and spring. Apply a light coat of high-temperature grease (such as Aeroshell 33MS/64) to the receiver extension threads prior to installation, torque the castle nut to 38–40 ft-lbs, and properly stake the castle nut into two end-plate notches using a center punch.

  1. Ensure the host lower receiver is completely clear and separate from any upper receiver, and confirm you have a properly calibrated torque wrench and AR-15 armorer's castle nut wrench on hand.
  2. Thread the castle nut onto the 7075-T6 Mil-Spec buffer tube (notches facing rearward toward the stock), slide the BCM® QD End Plate onto the tube (indexing boss facing forward), and apply a thin film of grease to the buffer tube threads.
  3. Install the buffer retainer pin and spring into the lower receiver pocket, thread the buffer tube clockwise until the tube lip captures the edge of the buffer retainer without binding it, and verify the receiver takedown pin detent and spring are seated beneath the end plate.
  4. Align the end-plate boss into the rear lower receiver recess, tighten the castle nut to 38–40 ft-lbs using an armorer's wrench, and stake the end plate metal cleanly into two castle nut notches.
  5. Insert the Mil-Spec carbine spring and 3.0 oz buffer into the tube until the buffer clicks past the retainer, slide the BCMGUNFIGHTER™ Mod 0 stock onto the tube, and verify smooth locking across all 6 positions before mating the upper receiver.

Key Features

  • Complete Mil-Spec Stock & Receiver Extension Kit: Includes BCMGUNFIGHTER™ Mod 0 Stock, 6-position Mil-Spec buffer tube, carbine buffer, action spring, castle nut, and BCM® QD End Plate.
  • 7075-T6 Aluminum Mil-Spec Buffer Tube: Impact-extruded 1.148" OD receiver extension with rolled threads and Type III Class 2 hardcoat anodizing for maximum thread and impact strength.
  • Snag-Free BCMGUNFIGHTER™ Mod 0 Stock: Lightweight USA-made polymer stock with an internal zero-rattle latch, sloped cheek weld, and non-slip rubber buttpad.
  • Dual-Point QD Sling Versatility: Includes both an ambidextrous steel QD socket on the buttstock and a phosphate-coated 4140 steel BCM® QD End Plate at the receiver.
  • Mil-Spec Buffer & Action Spring Included: Standard 3.0 oz carbine buffer and Mil-Spec spring ensure reliable cycling across properly gassed 5.56/.223 and .300 BLK uppers.

Product Specifications

  • Brand: Bravo Company Mfg.® (BCM®)
  • Model/Series: BCMGUNFIGHTER™ Stock Mod 0 Complete Kit
  • MPN / SKU: BCM-GFSK-MOD-0-BLK / BCMGFSKMOD0BLK
  • UPC: 812526020598
  • Buffer Tube Material & Finish: 7075-T6 Aluminum (1.148" Mil-Spec OD) / Type III Hardcoat Anodized Black
  • Stock Material & Color: High-Strength Impact-Resistant Polymer / Matte Black
  • Included Hardware: Mod 0 Stock, 6-Position Mil-Spec Tube, 3.0 oz Carbine Buffer, Carbine Spring, Castle Nut, BCM® QD End Plate
  • Platform Compatibility: Mil-Spec AR-15 / M4 Lower Receivers
  • Country of Origin: Made in the USA