*CONTACT US FOR A SPECIAL COUPON CODE*
Breek Arms WARHAMMER Mod2 Ambidextrous Charging Handle - Fits AR-15 / M16 Upper Receivers, Low-Profile Textured Latches, 7075-T6 Aluminum Construction, Flat Dark Earth (FDE) Anodized Finish - BRK522-FDE / 812296030810
Product Description
Upgrading a hard-use tactical carbine, dynamic competition rifle, or modern defensive staging framework requires manual controls built for absolute speed and cross-hand utility. Mil-Spec single-latch charging handles force awkward, one-sided manipulation that can flex the main shaft, while massive oversized aftermarket wings catch constantly on plate carriers and brush lanes during field operations on your bench. The **Breek Arms® WARHAMMER™ Mod2 AR-15 Ambidextrous Charging Handle (BRK522-FDE / 812296030810)** completely flatlines these manual of arms bottlenecks, delivering a **sleek, low-profile extended dual-latch engagement architecture** finished in tactical Flat Dark Earth.
Proudly engineered and precision CNC-machined in the United States by Breek Arms, the Mod2 Warhammer is carved from a solid block of high-tensile **7075-T6 structural grade aircraft aluminum alloy**. The standout engineering choice is its specialized compact handle width: measuring a mere 2.78 inches across the wings, it provides an aggressive gripping surface without protruding past the width of a standard forward assist or bolt release block. The dual spring-loaded latches function completely independently, allowing fluid, lightning-fast manipulations using a single finger, a full palm bludgeon, or traditional split-finger indexing from either the left or right side of the weapon. Outfitted with an integrated **rear gas deflection shelf** designed to channel blowback away from your eyes when running suppressors, this turn-key utility asset upgrades your receiver control layout straight from your workbench.
Engineered to drop instantly into any mil-spec AR-15 upper receiver channel, this factory-calibrated ambidextrous interface engine ensures smooth bolt carrier tracking directly from your workspace bench.
*Armorer Bench Notes & Real-World Receiver Staging Guidance: The Breek Arms BRK522-FDE control component arrives workspace ready, securely housed in factory original inventory retail presentation packs. PROPRIETARY AR-15 / M16 RECEIVER INTERFACE MATRIX: The structural tracking shaft, gas key clearance slot, and perimeter indexing tabs are engineered natively, strictly, and dimensionally to drop into **standard mil-spec AR-15 upper receiver chassis designs**. *Caliber and Platform Cross-Fitment Checklist:* This assembly is fully cross-compatible on your bench with platforms chambered in **5.56x45mm NATO, .223 Remington, .300 AAC Blackout, .224 Valkyrie, and AR-15 pattern 9mm Luger pistol caliber conversions (PCC)**. *Platform Incompatibility Warning:* This unit will **NOT fit large-frame AR-10, LR-308, or SR-25 receiver chassis options**, as their longer bolt strokes require an extended structural stem. Armorer Workbench Custom Staging Sequence: 1. Visually and physically confirm your host long gun is completely clear of live ammunition, the magazine is separated, and the fire control area is safe. 2. Push out the rear receiver takedown pin from left to right, pivoting the upper assembly forward to expose the internal charging track channel. 3. Retract the existing charging handle and bolt carrier group halfway, then lift the carrier assembly out of the receiver pool. 4. Compress the charging handle latch ears slightly, line up the side indexing lugs with the circular relief cutouts inside the upper ceiling, and lower the stem down flush into its track. 5. Apply a micro-bead of high-efficiency weapon lubricant to the lateral guide rails of the FDE Warhammer shaft. 6. Re-insert the bolt carrier group face into the handle channel, push both components forward concurrently until the primary bolt locks into battery and the dual latch ears click loudly over the receiver shoulders, then secure the frame pin before rolling downrange.*
Key Features
- True Ambidextrous Independent Latches: Outfitted with dual spring-loaded release levers that trigger independently, enabling fluid charging cycles from either side using any hand-indexing style.
- Sleek Low-Profile Extended Wings: Spans a compact 2.78 inches horizontally, providing ample clearance for high-magnification scope rings while remaining narrow enough to prevent body armor snags.
- Hardened 7075-T6 Aircraft Aluminum: Precision CNC-machined from ultra-dense 7075-T6 aluminum block alloy to eliminate stem flexing or twisting under high-drag clearing strokes.
- Built-in Rear Gas Deflector: Built with an elevated structural shelf at the rear of the stem that redirects leaking gases away from the shooter's face during suppressed fire.
- Durable FDE Anodized Finish: Treated with a hard-coat anodized Flat Dark Earth (FDE) tan dressing that matches standard tactical military aesthetics while resisting finish wear.
- Aggressive Micro-Serrated Texture: The leading edges of both latch wings feature deep, perpendicular micro-grooves to ensure positive skin retention in wet, muddy, or gloved environments.
Product Specifications
- Brand: Breek Arms® (Murdock, Minnesota / Made Proudly in the USA)
- Model Line: WARHAMMER™ Mod2 Extended Ambidextrous Accessory Series
- MPN/SKU Code: BRK522-FDE (AR15 Warhammer Mod2 Flat Dark Earth Anodized Base SKU)
- UPC Code Profile: 812296030810
- Firearm Platform Compatibility: Standardized Mil-Spec AR-15 / M4 / M16 Upper Receivers Natively
- Bore Caliber Staging Depth: Multi-Caliber AR15 Array Compatibility (5.56 NATO, .223 Rem, .300 BLK, 9mm PCC Class)
- Ambidextrous Operational Layout: Symmetrical Dual Independent Spring-Loaded Latch Assembly
- Total Handle Wingspan Width: ~2.78 Inches (~70.6 mm Extended Low-Drag Profile Clearance Axis)
- Structural Material Base: Precision CNC-Machined Solid 7075-T6 Structural Grade Aircraft Aluminum Billet
- Exterior Finish Dressing: Mil-Spec Type III Flat Dark Earth (FDE) Tan Hard-Coat Anodized Shield
- Gas Management Architecture: Integrated Raised Rear Gas Shield Deflection Block Platform
- Full Kit Component Checklist: 1x Fully Assembled WARHAMMER Mod2 Ambidextrous Charging Handle Only
- Packaging Format Class: Factory Original Sealed Breek Arms Graphic Card Retail Presentation Pack
- Product Type Category: Rifle Components / Ambidextrous Charging Handles & Upper Receiver Control Parts
- Overall Structural Stem Width: ~0.62 Inches (~15.7 mm Standard Mil-Spec Shaft Alignment Metric)
- Overall Physical Component Length: ~6.90 Inches (~175.2 mm Total Linear Assembled Space)
- Net Component Module Mass: ~0.95 Ounces (~26.9 Grams Ultra-Lightweight Structural Alloy Weight)
- Global Quality Certifications: Engineered to Rigid US Commercial and Tactical Duty Tolerances
- Warranty Tracking Protection: Fully Backed by Breek Arms Lifetime Factory Product Performance Guarantee
