Brouwer LLC 247 Grip Module Magwell - Fits Brouwer 247 Polymer & Aluminum P365 Series Modules, Flared Tactical Reload Funnel, Low-Profile Concealed Carry Geometry, 6061-T6 Aluminum, Matte Black Finish - 247-MW-BLK
Product Description
Optimizing an everyday carry (EDC) sidearm, building a responsive defensive micro-compact pistol, or refining your custom weapon staging platform requires reload funnels built for fluid speed under absolute space limits. Standard flat micro grip heels leave no room for error, forcing the sharp rims of steel magazines to snag against frame edges during high-stress reloads on your bench. The **Brouwer LLC® 247 Grip Module Magwell (247-MW-BLK)** completely flatlines these manual cycling failures, packing an aggressive **flared capture funnel geometry** into a low-profile, concealment-tuned design.
Proudly engineered and precision CNC-machined in the United States by Brouwer LLC, this performance hardware add-on is tailored explicitly to interface with Brouwer 247 P365 series frames (compatible with both polymer and billet aluminum module variants). Carved from a high-tensile block of lightweight **6061-T6 structural aircraft-grade aluminum** and coated in a clean, non-reflective anodized matte black protective dressing, this accessory introduces critical reload tracking insurance without creating unnecessary printing bulk under clothing. The funnel mouth catches off-angle magazine faces and centers them instantly into the channel, while the forward outer lip acts as a subtle palm ledge to secure a lock-tight master grip straight from your workbench.
Engineered to slide securely onto the integrated alignment channels of your Brouwer lower frame, this factory-calibrated metal funnel ensures absolute re-indexing synchronization straight from your workspace bench.
*Armorer Bench Notes & Real-World Micro-Magwell Staging Guidance: The Brouwer 247 Magwell pack arrives workspace ready, containing the anodized aluminum flared collar extension and 1x hardened steel low-profile mounting retention screw. PROPRIETARY 247 SERIES COMPONENT INTERFACE MATRIX: The mounting shoulder and tracking walls are engineered natively, strictly, and dimensionally to anchor onto **Brouwer LLC 247 P365 grip modules only (suits both polymer and aluminum frames)**. *Magazine and Basepad Fitment Checklist:* The bottom geometry is calibrated to receive factory SIG Sauer 17-round XMACRO or 21-round extended P365 magazines. Verify on your bench that you are **NOT using standard short flush-fit 10 or 12-round sub-compact magazine tubes**, as their short bodies will reside completely inside the funnel shroud, blocking the magazine basepad from latching home. Armorer Workbench Custom Staging Sequence: 1. Visually and physically confirm your host SIG P365/247 carry weapon is completely clear of live ammunition, the magazine is separated, and the firing tracking chamber is safe and open. 2. Thoroughly wipe clean the bottom lip margins of your 247 grip shell with a dry cloth to clear away oil film or field dust layers. 3. Guide the aluminum magwell sleeve onto the base tracking lip from front to back, ensuring the internal grooves index flush against the frame wall shoulders. 4. Insert the provided retention screw through the inner mounting lane at the rear interior of the magwell cavity, threading it clockwise into the frame's anchor insert. 5. Secure the fastener tightly using a high-quality hex key tool, final-torquing the assembly strictly to **10 to 12 inch-pounds** on your bench. 6. Rapidly insert an empty 17-round steel magazine array several times to verify smooth release drop-free clearing and absolute locking battery before rolling downrange.*
Key Features
- Flared Tactical Reload Profile: Features an aggressively beveled internal entry mouth that acts as a guide funnel to smoothly capture and center magazines under dynamic stress.
- Concealed Carry Optimized Geometry: Meticulously sculpted with thin, low-profile outer walls to maximize reload efficiency while completely avoiding bulk printing under standard cover garments.
- Milled 6061-T6 Aluminum Core: Precision CNC-machined from solid billet structural aircraft-grade aluminum alloy to ensure it won\'t split or warp when dropped on hard concrete surfaces.
- Anodized Matte Black Finish: Treated with a hard-coat anodized matte black armor skin that resists trail scrapes, holster friction, and harsh chemical solvents.
- Enhanced Grip Rest Edge: The exterior lip profile subtly pushes the bottom of your firing hand upward, helping to lock in a rock-solid master grip for superior recoil management.
- Single-Screw Structural Anchor: Secures firmly to the frame base via a low-profile mechanical screw layout, ensuring zero rattling or shifting under high-speed operation.
Product Specifications
- Brand: Brouwer LLC® (Premium Firearms Component Group / San Antonio, TX)
- Model Line: 247 Performance Handgun Upgrades & Specialized Micro-PDW Grip Accessories
- MPN/SKU Code: 247-MW-BLK (Brouwer 247 Aluminum Magwell Anodized Black SKU)
- Grip Chassis Compatibility: Brouwer LLC 247 Polymer Grip Modules & 247 Billet Aluminum Modules
- Firearm Family Foundation: Sig Sauer P365 / P365XL / P365-XMACRO Fire Control Internals
- Ammunition Magazine Calibration: Optimized for SIG P365 17-Round and 21-Round Magazine Columns
- Magwell Funnel Geometry: Low-Profile Concealment Beveled Entry Funnel
- Structural Material Base: Precision CNC-Machined Solid 6061-T6 Aircraft-Grade Structural Aluminum Billet
- Exterior Finish Dressing: High-Durability Matte Black Hard-Coat Anodized Anti-Reflective Shield
- Fastening Installation Hardware: 1x Hardened Carbon Steel Single Retention Locking Screw Fastener
- Full Kit Component Checklist: 1x 247 Aluminum Black Magwell Component, 1x Mounting Screw Assembly
- Packaging Format Class: Factory Original Sealed Brouwer LLC Poly Bag Inventory Protection Asset Pack
- Product Type Category: Handgun Components / Flared Concealed Carry Magwells & Frame Grip Accessories
- Overall Structural Unit Width: ~1.28 Inches (~32.5 mm External Width Maximum Clearance Axis)
- Net Component Module Mass: ~0.45 Ounces (~12.7 Grams Ultra-Lightweight Low-Profile Metal Mass)
- Global Quality Certifications: Formulated to Rigid US Precision Commercial and Performance Duty Standards
- Warranty Tracking Protection: Fully Backed by Brouwer LLC Factory Product Performance Guarantee
