*CONTACT US FOR A SPECIAL COUPON CODE*
CANiK ONYX XL Competition Reflex Sight 6 MOA Red Dot Trijicon RMR Footprint CAOP2202 UPC 850072317120
Product Description
The CANiK® ONYX XL Competition Reflex Sight (SKU: CAOP2202 / UPC: 850072317120) is an oversized-window, open-emitter pistol optic engineered specifically for USPSA/IDPA competitive shooters, tactical duty applications, and high-speed target transitions. Built on the industry-standard Trijicon RMR® mounting footprint, the ONYX XL pairs a commanding 0.94" × 1.65" optical window with a high-visibility 6 MOA red dot—allowing shooters to acquire the reticle immediately upon presentation and track the dot uninterrupted through the entire recoil cycle.
Precision-machined from solid aircraft-grade aluminum with reinforced structural pillars, the ONYX XL housing is built to absorb tens of thousands of full-power slide cycles without zero drift. Its non-reflective matte black housing integrates CANiK’s patented Tactical Concave Face (TCF) serrations across the front brow, shielding the recessed glass lens from barricade strikes while providing an aggressive, non-slip ledge for emergency one-handed slide manipulation. Rated to IP67 waterproof standards and engineered to operate reliably from -30°C to +60°C (-22°F to +140°F), it excels in both match conditions and hard-use duty environments.
To maximize optical clarity and competition reliability, the ONYX XL utilizes a side-load CR1632 battery tray that eliminates the internal emitter reflections common to top-loading battery caps while enabling battery swaps in seconds without disturbing your zero. Powered by CANiK’s MAIS (Motion Activated Illumination System), the optic automatically enters sleep mode after 4 minutes of stillness and wakes instantaneously at the slightest movement, delivering up to 50,000 hours of runtime across 10 manual brightness settings (8 Daylight + 2 Night Vision).
*Armorer Bench Notes & Real-World Staging Guidance:*
Fitment Matrix: Direct-mounts without an adapter plate to Trijicon RMR®-cut slides including the CANiK TTI Combat, METE SF PRO, and late-production METE SF (after SN 25BU15401), METE SFT (after SN 25CC08376), METE SFT PRO (after SN 25CY04801), METE SFx (after SN 26BY00001), and METE SFx PRO (after SN 25CV02351), as well as standard RMR-cut pistols. CRITICAL WARNING: Earlier METE pistols manufactured BEFORE those serial number cutoffs feature the smaller Shield RMSc cut and will NOT direct-mount the ONYX XL. For TP9 SFx / TP9 Elite Combat, use CANiK Optic Interface Plate #02 (SKU PACN0701); for SFx RIVAL / RIVAL-S, use Plate #R02 (SKU PACN0711). Will NOT fit Shield RMSc or Leupold DeltaPoint Pro footprints. Torque mounting screws to 15–18 in-lbs with blue removable threadlocker (Loctite 243).
- Ensure the host firearm is completely clear, magazine removed, and chamber visually and physically verified empty before beginning optic installation.
- Verify your slide serial number or RMR interface plate (#02 or #R02) and thoroughly degrease the mounting deck, recoil lugs, and screw threads with 99% isopropyl alcohol or acetone.
- Install a fresh CR1632 lithium coin cell into the side-load battery tray, secure the tray screw, and confirm crisp 6 MOA dot illumination across all 10 brightness levels.
- Seat the ONYX XL firmly onto the Trijicon RMR recoil bosses, apply a small drop of blue threadlocker to the mounting screws, and torque evenly in an alternating pattern to 15–18 in-lbs using a calibrated torque driver.
- Verify unobstructed extractor plunger movement, witness-mark the fastener heads, and confirm a 15-to-25-yard zero before match or duty staging.
Key Features
- Expansive 0.94" × 1.65" Competition Window: Oversized parallax-free sight picture speeds up dot acquisition on imperfect draws and keeps the dot visible throughout recoil.
- High-Visibility 6 MOA Red Dot Reticle: Bold 6 MOA dot indexes rapidly on close-to-mid-range targets with crisp 1 MOA windage/elevation clicks (80 MOA total adjustment travel).
- Trijicon RMR® Mounting Footprint: Direct-fits CANiK TTI Combat, late-serial-number METE models, and RMR-cut slides, or mounts to RIVAL / TP9 platforms via CANiK #R02 / #02 plates.
- Side-Load CR1632 Battery Tray & MAIS: Allows tool-free zero-retention battery changes with up to 50,000 hours of runtime and 4-minute Motion Activated Illumination System auto-sleep.
- Aircraft-Grade Aluminum & Patented TCF: Reinforced structural pillars and Tactical Concave Face front serrations withstand heavy slide recoil and enable one-handed slide racking.
- 10 Manual Brightness Settings & IP67 Rated: Features 8 daylight and 2 night-vision settings inside a dust-tight, 1-meter submersible housing rated from -30°C to +60°C.
Product Specifications
- Brand: CANiK®
- Model/Series: ONYX XL Competition Reflex Sight
- MPN / SKU: CAOP2202 / CAOP0003
- UPC: 850072317120
- Magnification: 1x (Unlimited Eye Relief, Parallax-Free)
- Reticle: 6 MOA Red Dot
- Mount Pattern: Trijicon RMR® Footprint
- Window Size: 0.94" × 1.65" (28.4 mm × 22.8 mm)
- Dimensions (L × W × H): 2.27" × 1.36" × 1.36"
- Adjustment Graduation & Travel: 1 MOA per Click (80 MOA Windage / 80 MOA Elevation)
- Brightness Settings: 10 Manual Levels (8 Daylight + 2 Night Vision)
- Battery Type & Life: 1x CR1632 (Side-Load Tray) / Up to 50,000 Hours
- Motion Activation: MAIS (4-Minute Auto-Sleep / Instant Wake)
- Housing Material: Aircraft-Grade Aluminum (Reinforced Pillar Architecture)
- Environmental Rating: IP67 Waterproof / -30°C to +60°C Operating Temp
- Platform Compatibility: Trijicon RMR®-Cut Pistols, CANiK TTI Combat, Post-Cutoff METE Series, & RIVAL / TP9 (via #R02 / #02 Plates)
- Country of Origin: Turkey
