Dead Air Armament Xeno 3 Prong Flash Hider 1 2x28 6mm DA129 UPC 810128160704
Product Description
The Dead Air Armament® Xeno 3-Prong Flash Hider (SKU: DA129 / UPC: 810128160704) is a lightweight, non-timed suppressor mounting muzzle device engineered for 5.56 NATO, .223 Remington, and 6mm rifle platforms threaded in 1/2x28 TPI. Built around the Xeno taper-lock mounting architecture, it delivers repeatable return-to-zero concentricity and effective unsuppressed signature reduction without adding unnecessary front-end mass.
CNC-machined from high-tensile 4140 chrome-moly steel and finished in a deep matte black salt-bath nitride treatment, the DA129 resists gas-cutting erosion, carbon fouling, and thermal fatigue under sustained suppressed fire. Its asymmetrical, non-symmetrical prong profile disrupts visible muzzle flash while eliminating the high-pitched tuning-fork ring common to conventional open-tine flash hiders.
Featuring a forward-taper seal ahead of left-hand external mounting threads, the Xeno interface isolates carbon buildup from the threads and prevents the suppressor from backing off during firing or seizing onto the host barrel. Because the 3-prong design requires no rotational timing, installation is fast and clean using standard 3/4-inch wrench flats machined directly into the rear collar.
*Armorer Bench Notes & Real-World Staging Guidance:*
Fitment Matrix: Fits barrels threaded in 1/2x28 TPI chambered in 5.56x45mm NATO, .223 Remington, and 6mm (.243 caliber) cartridges; interfaces exclusively with Dead Air Xeno suppressor adapters (such as the DA455 HUB adapter). CRITICAL: Never fire projectiles larger than 6mm (.243") through this muzzle device. Do NOT use crush washers—mount directly against a square barrel shoulder (or precision Accu-Washers if pin-and-weld length adjustment is needed), torque to 20–30 ft-lbs, and verify bore alignment with a concentricity gauge prior to live fire.
- Ensure the host firearm is completely clear, magazine removed, and chamber visually and physically verified empty.
- Remove any existing muzzle device and crush washer, then thoroughly degrease the barrel's 1/2x28 external threads and 90-degree shoulder with acetone or non-chlorinated brake cleaner.
- Thread the Dead Air DA129 Xeno Flash Hider onto the barrel by hand until the rear face seats flush against the barrel shoulder (apply high-temp threadlocker such as Rocksett if desired, avoiding the taper and external Xeno threads).
- Secure the upper receiver in a reaction rod or barrel vise and torque the flash hider to 20–30 ft-lbs using a 3/4-inch open-end wrench or crowfoot on the rear wrench flats.
- Thread a Xeno-equipped suppressor onto the left-hand mount threads until the taper seats firmly, check bore alignment with a caliber-specific alignment rod, and verify lockup before live-fire staging.
Key Features
- Xeno Left-Hand Taper-Lock Interface: Forward taper seal keeps carbon off the reverse-threaded mounting collar while ensuring tightening torque reinforces muzzle device installation.
- 6mm Bore Aperture: Accommodates 5.56mm / .223 Rem as well as 6mm ARC and 6mm Creedmoor barrels threaded in 1/2x28 TPI.
- Harmonic-Damped 3-Prong Geometry: Suppresses unsuppressed muzzle flash without producing an audible tuning-fork ping upon firing.
- Non-Timed Installation: Eliminates the need for timing shims and includes integrated 3/4-inch wrench flats for straightforward bench mounting.
- 4140 Nitride Construction: Precision-machined 4140 chrome-moly steel with a salt-bath nitride finish resists baffle-interface erosion and corrosion.
Product Specifications
- Brand: Dead Air Armament®
- Model/Series: Xeno 3-Prong Flash Hider
- MPN / SKU: DA129
- UPC: 810128160704
- Caliber / Bore Rating: Up to 6mm (.243 Caliber) / 5.56mm NATO
- Muzzle Thread Pitch: 1/2x28 TPI
- Mounting Interface: Dead Air Xeno Taper-Lock (Left-Hand External Threads)
- Material & Finish: 4140 Chrome-Moly Steel / Salt-Bath Nitride (Matte Black)
- Wrench Flats: 3/4-inch
- Platform Compatibility: 1/2x28 Threaded Rifles (5.56 NATO, .223 Rem, 6mm ARC) & Dead Air Xeno Suppressor Adapters
- Country of Origin: USA