*CONTACT US FOR A SPECIAL COUPON CODE*
Dead Air P Series Fixed Mount 1 2 x 28 RH Compatible Ghost M Wolf 9SD Wolfman DA410 UPC 810128161138
Product Description
The Dead Air Silencers® P-Series Fixed Mount 1/2x28 (SKU: DA410 / UPC: 810128161138) provides an ultra-rugged, direct-thread mounting solution for attaching P-Series suppressors to fixed-barrel carbines, subguns, and precision hosts. Engineered specifically to convert your Dead Air Wolfman, Ghost-M, or Wolf-9SD silencer into a rock-solid, low-profile direct-thread configuration, the DA410 eliminates unnecessary muzzle bulk while ensuring precise bore alignment across continuous high-volume strings of fire.
Precision CNC-machined in the United States from solid 17-4 PH stainless steel and through-hardened for superior structural integrity, this fixed mount withstands the intense heat, gas erosion, and blast pressures generated by rapid-fire pistol caliber carbines and supersonic rifle calibers. The exterior is coated in a durable black nitride surface conversion that resists chemical corrosion, carbon fouling, and harsh ultrasonic solvent cleaning, maintaining pristine internal thread engagement and preventing thread galling during frequent can transfers.
The DA410 features a dedicated 1/2x28 RH thread interface paired with a precision-machined internal 90-degree alignment shoulder that locks firmly against your barrel face. Integrated drive flats allow armorers to apply proper installation torque utilizing standard open-end armorers wrenches or Dead Air multi-tools, while circumference knurling provides quick, tool-free hand tightening at the range. By replacing bulky piston housings and booster assemblies with a dedicated one-piece steel mount, the DA410 delivers the shortest, lightest, and most concentric platform connection available.
*Armorer Bench Notes & Real-World Staging Guidance:*
Fitment Matrix: Directly threads into Dead Air Wolfman, Ghost-M, and Wolf-9SD suppressors (and P-Series adapter-equipped Primal or Mojave 9 silencers) for attachment to 1/2x28 RH fixed-barrel carbines, subguns, rimfires, and bolt-action rifles. CRITICAL ARMORER NOTICE: NEVER use on tilting-barrel handguns (Glock, S&W M&P, Sig P320), which require a piston and booster spring. NEVER use crush washers or peel washers to time or shoulder this mount; it must seat squarely against a clean, machined 90-degree barrel shoulder. Always verify bore concentricity with a precision alignment rod prior to chambering live ammunition.
- Ensure the host firearm is completely clear, magazine removed, and chamber visually and physically confirmed empty before any muzzle device work.
- Unscrew and remove the existing booster assembly, 3-lug adapter, or KeyMicro hub from the rear of the Dead Air P-Series suppressor housing.
- Apply a light coating of high-temperature anti-seize grease to the external threads of the DA410 mount, then thread it firmly into the suppressor body and torque to 25–30 ft-lbs using the provided spanner tool.
- Degrease the host barrel threads, confirm the shoulder is free of carbon or burrs, apply high-temperature thread grease, and thread the suppressor assembly onto the 1/2x28 muzzle until it seats completely flat against the shoulder.
- Insert a caliber-specific armorer alignment rod down the suppressor bore to visually confirm perfect concentricity with zero baffle or end-cap contact before staging for live fire.
Key Features
- Dedicated P-Series Thread Interface: Drops directly into Dead Air Wolfman, Ghost-M, and Wolf-9SD silencer bodies with zero adapters required.
- Standard 1/2x28 RH Barrel Pitch: Fits the vast majority of 9mm pistol caliber carbines, AR-9 platforms, dedicated rimfire hosts, and 5.56/.300 BLK fixed barrels.
- 17-4 PH Stainless Steel Construction: Delivers extreme yield strength and high-heat tolerance under sustained rapid-fire cycles.
- Corrosion-Resistant Black Nitride Finish: Shields the mounting interface from corrosive gases, carbon washouts, and harsh solvent baths.
- True 90-Degree Indexing Shoulder: Ensures repeatable, rock-solid bore alignment and eliminates baffle strike risks caused by canted seating.
- Low-Profile Direct-Thread Architecture: Saves overall length and weight compared to bulky quick-detach adapters or locked-out piston housings.
- Integrated Tool Drive Flats: Enables positive torque application with standard armorer wrenches or Dead Air spanner tools.
Product Specifications
- Brand: Dead Air Silencers® / Dead Air Armament
- Model/Series: P-Series Fixed Direct Thread Mount
- MPN / SKU: DA410
- UPC: 810128161138
- Thread Pitch: 1/2x28 RH
- Mounting System: P-Series Direct Thread
- Material: Heat-Treated 17-4 PH Stainless Steel
- Finish: Black Nitride / QPQ Melonite
- Silencer Compatibility: Dead Air Wolfman, Ghost-M, Wolf-9SD, Primal (w/ P-Series Hub), Mojave 9 (w/ Adapter)
- Host Compatibility: Fixed Barrel Platforms Only (PCC, AR-9, Subguns, Bolt Actions, Rimfire)
- Country of Origin: United States
