Fenix ALG-06 M-LOK Remote Pressure Switch Mount - Precision CNC-Machined Aerospace Aluminum, Low-Profile Rail Integration, Matte Black Finish - FX-ALG06
Product Description
Securing a tactical remote pressure switch to a modern M-LOK® handguard traditionally required messy double-sided tape, loose hook-and-loop sheets, or elastic bands. Under the heavy heat of sustained firing strings or rough trail drops, standard adhesive tape melts, peeling away and letting your wire harness dangle into your sightline on your workbench. The **Fenix® ALG-06 Pressure Switch M-LOK Mount (FX-ALG06)** completely flatlines these staging weaknesses, providing a sleek, mechanical aluminum anchor block that clamps your remote pad directly to your handguard slats.
Proudly engineered and torture-tested to demanding tactical parameters, this low-profile mounting rail is precision CNC-machined from a solid block of **A6061-T6 structural grade aerospace aluminum billet**. The internal pocket layout is custom-molded to match the exact geometric dimensions of **Fenix AER-series tactical pressure switch pads**. The switch pad slides smoothly into the side-retaining tracking slots without requiring adhesive modifiers, locking flush into place. Equipped with standard low-profile indexing pins and heavy-duty steel M-LOK T-nuts, this structural base provides a clean thumb index point that stays perfectly rigid under heavy muzzle blast forces.
Finished in a deep, non-reflective Type III hardcoat anodized jacket and complete with its own hex wrenched assembly hardware, this turn-key weapon mod delivers complete structural confidence right on your workbench.
*Armorer Bench Notes & Real-World Handguard Staging Guidance: The Fenix FX-ALG06 aluminum base mount pack arrives complete with the single-piece machined M-LOK slot adapter plate, 2x low-profile steel T-nut cam fasteners, 2x socket head cap screws, and a compact Allen wrench. PROPRIETARY INTERFACE SPECIFICATION COMPATIBILITY MATRIX: This rail base component is custom-engineered natively, strictly, and exclusively to receive **Fenix AER-series remote pressure tape pads (specifically including the AER-02, AER-03, AER-04, and AER-05 models)**. *Handguard System Structural Requirement:* It installs uniformly onto any standard, authenticated **M-LOK (Modular Lock) negative-space rail slot layout** along modern aluminum handguards. Armorer Workbench Staging Sequence: 1. Visually and physically confirm your rifle platform is completely unloaded, cleared of all live ammunition, and verified safe. 2. Thread the included M-LOK screws through the top holes of the ALG-06 aluminum deck and screw them loosely into the back-side steel T-nuts, leaving a clear gap space. 3. Guide your Fenix AER pressure switch pad into the side channel tracking paths of the mount until the rubber housing centers inside the open retention block. 4. Position the assembly onto your handguard's M-LOK slot at your preferred thumb indexing sector. 5. Keep downward pressure flat against the rail while torqueing the screws clockwise with the included Allen key until the internal T-nuts turn 90 degrees and lock tightly against the inner wall to a secure snug hold.*
Key Features
- Rock-Solid Mechanical Security: Replaces weak hook-and-loop tapes with a rigid, bolted metallic tracking mount that can't peel off when handguards heat up.
- Premium A6061-T6 Aluminum Billet: Precision multi-axis CNC-machined from structural aerospace aluminum block to prevent bending, stripping, or tracking cracks.
- Low-Profile Snag-Free Geometry: Ultra-slim profile sits close to the handguard, minimizing edge bulk to prevent catching on slings, brush, or window frames.
- Slide-In Friction Engagement: Engineered with tight internal guide lips that hold your Fenix pressure switch pad firmly without needing glue or double-sided tape.
- Mil-Spec Type III Hardcoat Anodize: Sealed in a deep, scratch-resistant matte black anodized jacket that actively fights off trail moisture, environmental dirt, and harsh gun solvents.
- Turn-Key M-LOK Installation: Includes premium steel backing T-nuts, low-profile counter-sunk screws, and a matching hex drive wrench to streamline workshop staging.
Product Specifications
- Brand: Fenix® Light Limited (Shenzhen, China)
- Model Line: High-Performance Professional Weapon Mount Illumination Interface Accessories
- MPN/SKU Code: FX-ALG06 (Also cataloged as ALG-06 / ALG06)
- UPC Code Profile: 6942870308685
- Pressure Switch Fitment: Fenix AER-Series Tactical Remote Pressure Switches (AER-02 / AER-03 / AER-04 / AER-05)
- Handguard Interface Core: Standard Authenticated M-LOK® (Modular Lock System) Rail Clusters
- Mount Component Structural Material: Premium Multi-Axis CNC-Machined Heavy-Duty A6061-T6 Aircraft Grade Aluminum
- Exterior Finish Dressing: Mil-Spec Type III Hardcoat Anodized Non-Reflective Matte Black Shield
- Fastener Nut Component Material: High-Tensile Carbon Steel Machined Cam-Locking M-LOK T-Nuts
- Mounting Screws Thread Class: Hex Socket Head Counter-Sunk Low-Profile Fastener Array
- Full Kit Component Checklist: Completed ALG-06 M-LOK Mount Deck, 2x T-Nuts, 2x Screws, 1x Hex Wrench
- Packaging Format Class: Factory Retail Sealed Peg-Hang Slim Hardshell Presentation Blister Box
- Product Type Category: Rifle Components / Flashlight Rail Mounts & Pressure Switch Accessories
- Overall Mount Body Dimensions: ~2.72" x 0.94" x 0.35" (~69.0 mm x 24.0 mm x 9.0 mm Rail Footprint)
- Net Component Module Mass: ~0.60 Ounces (~17.0 Grams Ultra-Lightweight Low-Profile Metal Mass Weight)
- Global Quality Certifications: Fully RoHS and CE Compliant for Environmental Material Safety
- Warranty Tracking Protection: Fully Backed by Fenix Factory Limited Warranty Support
