Grip Pod Systems GPS V2 Cam Lever Vertical Foregrip Bipod Picatinny Black GPS V2 CL UPC 769498621165
Product Description
The Grip Pod Systems® GPS V2 Cam Lever Vertical Foregrip Bipod (SKU: GPS-V2-CL / UPC: 769498621165) combines a combat-proven vertical forward grip with an instantaneously deployable bipod in a single integrated chassis. Engineered for duty carbines, patrol rifles, and tactical platforms utilizing MIL-STD-1913 Picatinny rails, the V2 architecture refines the classic military-issued Grip Pod with a slimmer ergonomic profile and an adjustable quick-detach (QD) Cam Lever mount for rapid tool-free installation and removal.
Constructed from high-impact, aerospace-grade reinforced polymer, the main housing resists extreme temperature swings, carbon fouling, gun oils, and harsh cleaning solvents without warping or cracking. Inside the V2 shaft, hardened stainless steel inserts reinforce the polymer bipod legs, delivering superior axial load-bearing rigidity and torsional stability under heavy forward bipod loading compared to all-polymer alternatives. The factory-calibrated Cam Lever clamping mechanism locks positively onto standard 1913 Picatinny rail slots and features user-adjustable tension to maintain zero play across varied rail tolerances.
The V2 iteration introduces a contoured 1.75-inch outer diameter grip body with aggressive non-slip texturing that improves weapon control during rapid target transitions, barrier indexing, and wet or gloved operation. When transitioning from offhand CQB movement to supported prone or barricade fire, depressing the recessed thumb activation button deploys the internal spring-loaded legs in a fraction of a second, providing immediate elevation and muzzle stability without cluttering the forend with separate accessories.
*Armorer Bench Notes & Real-World Staging Guidance:*
Fitment Matrix: Direct fitment for all MIL-STD-1913 Picatinny (1913) under-barrel rail systems on AR-15, M4, AR-10, SCAR, MP5 (railed), and tactical shotgun platforms. CRITICAL: Will NOT mount directly to M-LOK, KeyMod, or Magpul MOE slots without an intermediate 1913 Picatinny rail section. Factory Cam Lever tension is preset to true MIL-STD-1913 tolerances; if mounting on commercial-spec or worn rails, adjust the Cam Lever tension nut in quarter-turn increments—never force the lever closed, as excessive torque can deform polymer or aluminum rail lugs.
- Ensure the host firearm is completely clear, magazine removed, and the chamber visually and physically verified empty before handling the forend.
- Inspect the 6 o'clock MIL-STD-1913 Picatinny rail section for debris, carbon buildup, or burrs, and ensure the bipod legs are fully retracted and locked inside the vertical grip body.
- Swing the Cam Lever to the fully open position, align the Grip Pod recoil lug with the desired Picatinny cross-slot, and seat the mount flush against the rail bottom.
- Close the Cam Lever firmly until it locks parallel to the grip body; if resistance is excessive or the mount exhibits fore-aft play, open the lever and fine-tune the opposite-side adjustment nut until firm, positive lockup is achieved.
- Perform a physical tug test to verify zero rail movement, test the push-button leg deployment and manual retraction cycles, and confirm clear hand and support-side staging before live-fire zeroing.
Key Features
- Dual-Role Vertical Grip & Instant Bipod: Transitions seamlessly from a rigid vertical foregrip to a stable shooting bipod via a recessed, spring-loaded push-button release.
- Hardened Stainless Steel Reinforced Legs: Polymer-overmolded stainless steel leg inserts prevent flex and collapse under heavy forward loading on hard surfaces.
- Adjustable QD Cam Lever Mount: Attaches and detaches rapidly from any MIL-STD-1913 Picatinny rail without tools while allowing micro-adjustment for exact rail tension.
- V2 Slimmer Ergonomic Contour: Redesigned 1.75-inch grip diameter with enhanced surface texturing reduces snag hazards and improves recoil control in wet or gloved conditions.
- Battle-Proven Polymer Construction: Impervious to moisture, extreme climates, and standard firearm cleaning solvents while preserving forward weapon balance.
Product Specifications
- Brand: Grip Pod Systems®
- Model/Series: GPS V2 Cam Lever (02-CL-V2)
- MPN / SKU: GPS-V2-CL / GPSV2CL
- UPC: 769498621165
- Mount Interface: MIL-STD-1913 Picatinny Rail (Quick-Detach Cam Lever)
- Material: Aerospace-Grade Reinforced Polymer / Hardened Stainless Steel Leg Inserts
- Grip Diameter: 1.75 in.
- Finish / Color: Matte Black
- Platform Compatibility: Firearms with MIL-STD-1913 Picatinny Forends
- Country of Origin: USA
