*CONTACT US FOR A SPECIAL COUPON CODE*
HKS Mechanical Revolver Speedloader - 6-Shot Medium-Frame Configuration, .38 Special & .357 Magnum, Twist-Knob Release, Aluminum & Polymer Construction - 10-A
Product Description
Maximizing the operational readiness and reloading efficiency of a traditional double-action revolver requires a cylinder replenishment system built for rock-solid stability. Loose ammunition carried in pockets or individual loops slows down handling times and leads to fumble errors during dynamic matches or critical field patrols. The **HKS® Revolver Speedloader 10-A (10A-HKS)** completely flatlines these manual staging bottlenecks, providing a proven, ultra-dependable **twist-knob mechanical locking mechanism** that securely stages a full six-round reload as a single unit.
Proudly manufactured to duty-grade standards in the United States by HKS, this field-classic speedloader features a dual-material construction designed to withstand hard duty service. The primary cartridge indexing body is molded from a high-density, **impact-stabilized black polymer matrix**, while the center locking actuator is machined from **solid billet aluminum** with a deeply knurled perimeter grip texture. Ammunition is held securely within the radial staging slots by an internal metal retention star. A simple twist of the aluminum knob releases the rounds, allowing gravity to drop the entire payload into the cylinder chambers instantly without complex linear plungers or brittle parts.
Engineered as a direct fit for mid-frame six-shot revolvers, this turn-key utility asset upgrades your revolver support setup straight from your workbench.
*Armorer Bench Notes & Real-World Cylinder Interface Guidance: The HKS 10-A speedloader module arrives workspace ready, securely sealed inside its high-visibility factory original yellow-and-black retail blister packaging. PROPRIETARY K-FRAME CYLINDER INTERFACE MATRIX: This precise loading hub is engineered natively, strictly, and dimensionally to match the center-to-center chamber spacing of **6-shot medium-frame revolvers chambered in .38 Special or .357 Magnum**. *Host Firearm Fitment Checklist:* It cross-indexes perfectly alongside the **Smith & Wesson K-Frame family (Models 10, 12, 13, 14, 15, 19, 64, 65, 66, and 67)**, **Taurus medium-frame lines (Models 66, 669, 689, 80, 82, and 85)**, and **Rossi Model 971 / 972** variants on your bench. Concealed Carry Grip Clearance Warning: Because this speedloader guides cartridges parallel to the frame, verify that your host revolver features clear relief cutouts on the left grip panel to allow the loader body to align straight without binding against thick wood or rubber grips. Armorer Workbench Custom Staging Sequence: 1. Visually and physically confirm your host revolver is completely clear of live ammunition, the cylinder is swung out fully open, and the muzzle is pointed in a safe direction. 2. To stage the tool, insert six cartridges into the polymer body channels. 3. Press the loader down slightly against your bench and turn the aluminum knurled knob **clockwise** to engage the internal retention star, locking the cartridge rims down tight. 4. To deploy during drills, drop the cartridge tips into the open cylinder chambers and turn the knurled knob **counter-clockwise** to cleanly drop the fresh payload home.*
Key Features
- Classic Twist-Knob Action: Uses a reliable, mechanical turn-to-release motion that keeps cartridges locked down tight until you twist the knob to load.
- Dependable Dual-Material Build: Combines a tough, impact-resistant polymer carrier body with a rugged machined aluminum release knob for long-term field durability.
- Rigid Cartridge Staging: Holds six rounds firmly in proper circular alignment, stopping loose pocket rattling and aligning bullets perfectly for quick chamber loading.
- Deeply Knurled Aluminum Knob: The aluminum twist cap features aggressive diamond checkering to guarantee a non-slip, positive finger purchase in cold or wet weather.
- Dual-Caliber Feeding Setup: Optimized internal clearances accept both high-power **.357 Magnum** duty loads and standard **.38 Special / +P** training rounds flawlessly.
Product Specifications
- Brand: HKS® Products Inc. (Florence, Kentucky)
- Model Line: High-Performance Mechanical Revolver Pocket Speedloaders
- MPN/SKU Code: 10-A (Alternative Inventory Tracking Index: 10A-HKS)
- UPC Code Profile: 088652000104
- Ammunition Caliber Match: .38 Special, .38 Special +P, and .357 Magnum Wheelgun Cartridges
- Cylinder Payload Capacity: 6 Rounds Radial Array Formatting Natively
- Release Mechanical System: Manual Counter-Clockwise Aluminum Star-Gear Twist Interlocking Teeth
- Carrier Housing Material: High-Density Injection-Molded Impact-Resistant Engineering Polymer
- Control Actuator Material: CNC-Machined Solid Billet Aluminum with Cross-Hatch Knurling
- Exterior Color Scheme: Non-Reflective Satin Black Polymer Base with Matte Silver Aluminum Accents
- Packaging Format Class: Factory Retail Peg-Hook Card Pack with High-Clear Blister Presentation Shield
- Product Type Category: Handgun Components / Revolver Speedloaders & Everyday Carry Staging Gear
- Overall Body Outer Diameter: ~1.46 Inches (~37.0 mm Compact Cylinder Clearance Footprint Metrics)
- Net Component Module Mass: ~0.80 Ounces (~22.6 Grams Lightweight Empty Staging Hub Weight)
- Country of Engineered Origin: Developed, Machined, Assembled, and Performance Field-Tested Proudly in the USA
- Warranty Tracking Protection: Fully Backed by HKS Original One-Year Factory Replacement Cover
Works with:
- Fits .38/.357. S&W 10, 12, 13, 14, 15, 19, 64, 65, 66, 67. Dan Wesson / Charter Arms / Taurus 606, 65, 66, 80, 82. Rossi 971, 951. 851, 351, and many others
