Holosun

Holosun IRIS-RD3 Triple Function Red Laser IR Laser & IR Illuminator Black - IRIS-RD3

MSRP: $1,099.99
$859.99
( saved $240.00 )
No reviews yet Write a Review
Adding to cart… The item has been added
SKU:
IRIS-RD3
UPC:
810047073864
  • $7.95 Flat Rate Shipping

  • Easy Returns

  • Safe Payments

  • The Best Products

*CONTACT US FOR A SPECIAL COUPON CODE*

Holosun IRIS RD3 Triple Function Rifle Red Laser IR Laser and IR Illuminator Picatinny Black IRIS RD3 UPC 810047073680

Product Description

The Holosun® IRIS-RD3 (SKU: IRIS-RD3 / UPC: 810047073680) is a next-generation, ultra-compact triple-function rifle laser and illuminator system combining a high-visibility 635nm red aiming laser, a Class 1 infrared (IR) aiming pointer, and a variable-divergence VCSEL IR illuminator in a single streamlined housing. Engineered specifically for night-vision-equipped carbines and low-light tactical operations, the IRIS-RD3 significantly reduces weight and rail footprint compared to legacy multi-function laser aiming modules.

Precision CNC-machined from 7075-T6 billet aluminum and finished in a non-reflective Type III hardcoat anodizing, the IRIS-RD3 is built to survive severe duty conditions. Internally, the co-aligned optical bench maintains zero across all three emitters simultaneously under 1,000G recoil impulses, while IPX8 waterproofing protects the electronics during full submersion and adverse weather exposure.

Designed around intuitive, ergonomic weapon manipulation, the IRIS-RD3 features a top-mounted center fire button for ambidextrous activation alongside a Crane-compatible remote pressure switch port with an included remote activation button. A tactile rear slider allows rapid, one-handed adjustment of the VCSEL IR illuminator beam from a tight long-range spot to a wide room-clearing flood, while its low-profile chassis sits cleanly beneath red dots and LPVOs without cluttering the shooter's field of view.

*Armorer Bench Notes & Real-World Staging Guidance:*

Fitment Matrix: Mounts directly to any standard MIL-STD-1913 Picatinny top rail on AR-15, AR-10, SIG MCX, SCAR, and similar tactical rifle platforms. CRITICAL WARNING: To maintain laser zero under recoil and handguard loading, mount the IRIS-RD3 ONLY on a monolithic upper receiver or a rigid, anti-rotation free-float Picatinny rail—never mount aiming lasers on drop-in plastic handguards or flex-prone rail extensions. Torque the Picatinny rail clamp fastener to 25–30 in-lbs using blue threadlocker (Loctite 242/243). Always install the safety lockout screw/block when training in eye-safe environments or storing the rifle.

  1. Ensure the host firearm is completely clear, magazine removed, and chamber visually and physically verified empty before mounting or zeroing the laser unit.
  2. Install a fresh CR123A lithium battery into the battery compartment, verifying correct polarity, and thread the battery cap snug against the O-ring seal to maintain IPX8 waterproof integrity.
  3. Position the IRIS-RD3 on the forward section of a rigid MIL-STD-1913 top rail, seat the recoil lug firmly forward inside a Picatinny slot, and torque the clamp screw to 25–30 in-lbs.
  4. Plug the included Crane-spec remote activation button firmly into the rear switch port, route and secure the cable away from hot gas blocks or barrels, and verify both top-button and remote-switch firing across Visible Red, IR Low, and IR High modes.
  5. Slaved co-alignment allows you to zero the visible red laser during daylight at your desired offset/converging zero distance (commonly 50 yards), which simultaneously zeroes the IR pointer; confirm final IR zero under night vision prior to operational staging.

Key Features

  • Co-Aligned Triple-Emitter Architecture: Houses a 635nm visible red laser, Class 1 830nm IR laser, and VCSEL IR illuminator on a single optical bench so zeroing the visible laser zeroes the IR pointer.
  • Variable-Focus VCSEL IR Illuminator: Clean, speckle-free VCSEL infrared beam adjusts smoothly via a rear tactile slider from tight long-range throw to wide close-quarters flood.
  • Ultra-Compact 7075-T6 Aluminum Housing: CNC-machined 7075-T6 chassis reduces rail bulk and sits low enough to clear modern red dot and LPVO sight pictures.
  • Ambidextrous & Remote Activation: Features an oversized top-center fire button plus an included Crane-spec remote pressure switch for natural support-hand activation.
  • IPX8 Submersible & 1,000G Shock Rated: Engineered for harsh duty environments with full waterproof sealing and high-recoil durability on 5.56, .308, and .300 BLK platforms.

Product Specifications

  • Brand: Holosun®
  • Model/Series: IRIS-RD3 (Triple Function Rifle Laser & Illuminator)
  • MPN / SKU: IRIS-RD3 / IRISRD3
  • UPC: 810047073680
  • Laser & Illuminator Output: Visible Red Laser (635nm, 5mW High / 1mW Low), IR Laser (830nm, 0.7mW Class 1), VCSEL IR Illuminator
  • Housing Material: 7075-T6 Aircraft-Grade Aluminum
  • Finish: MIL-A-8625 Type III Class 2 Hardcoat Anodized Black
  • Mounting Interface: MIL-STD-1913 Picatinny Rail
  • Power Source: (1) CR123A Lithium Battery
  • Waterproof / Shock Rating: IPX8 Submersible / 1,000G Vibration
  • Dimensions / Weight: 3.2" x 1.9" x 1.3" / 6.4 oz (with battery)
  • Platform Compatibility: Firearms with MIL-STD-1913 Picatinny Top Rail
  • Country of Origin: China (Designed & Engineered in USA)