*CONTACT US FOR A SPECIAL COUPON CODE*
Inforce WML White/IR Gen 3 Tactical Weapon Light - 450 Lumens White LED, 10,000 Candela Peak Intensity, 850nm Infrared (IR) Emitter, Integrated Picatinny Rail Mount, Matte Black Finish - IF71013 / 810119012029
Product Description
Staging a low-profile defensive carbine, active night-vision tactical rifle, or professional everyday staging framework requires a weapon light that adapts to both visible and covert roles without packing on front-end bulk. Clunky multi-piece lights with tape switches add excessive rail clutter, snag on gear webbing, and risk wire tears during high-stress movements on your bench. The **Inforce® WML White / IR Gen 3 Weapon Light (IF71013 / 810119012029)** completely flatlines these mechanical footprint and wire vulnerabilities, packing a highly versatile **dual-spectrum visible white and covert infrared light engine** into a streamlined, glass-reinforced unibody shell.
Proudly engineered and torture-tested to extreme recoil standards in the United States by Inforce, this Gen 3 multi-spectrum tactical illuminator delivers twice the beam intensity of older models within the exact same legendary ergonomic silhouette. Machined from a high-tensile **carbon-fiber reinforced polymer composite unibody hull**, this ultra-tough housing shrugs off hard drop impacts, heavy water exposure, and intense muzzle blast gas fields. The defining design choice is its integrated **450-lumen white LED array producing 10,000 candela** of crisp, high-contrast target identification power, paired with a dedicated **850nm infrared (IR) emitter** providing 100 mW of dynamic night vision device illumination. Swapping between spectrums is as simple as flipping a lateral mechanical toggle switch, giving you instant command over your tactical footprint straight from your armorer bench.
Engineered to clamp instantly onto any standard mil-spec 1913 Picatinny rail section via a built-in, toolless mounting jaw, this factory-calibrated low-profile light ensures absolute tracking stability directly from your workspace bench.
*Armorer Bench Notes & Real-World Low-Profile Tactical Staging Guidance: The Inforce IF71013 Gen 3 dual-spectrum lighting package arrives workspace ready, containing the complete black polymer unibody weapon light housing, 1x pre-installed high-energy CR123A lithium cell core, and a comprehensive systems programming manual guide sheet. INTEGRATED 1913 PICATINNY RAIL INTERFACE MATRIX: The mounting base geometry features a built-in, spring-loaded side clamping jaw engineered natively, strictly, and precisely to **lock onto standard MIL-STD 1913 Picatinny rails**. *Top Rail Staging & Thumb Placement Checklist:* The unique 45-degree angled rear pressure pad layout makes this device the ultimate **12 o'clock top rail mounting choice** on your bench, placing the button perfectly in line for ambidextrous thumb activation while keeping the muzzle profile entirely clear of barrel shadows. Armorer Workbench Custom Staging Sequence: 1. Visually and physically confirm your host long gun is completely clear of live ammunition, the magazine is separated, and the action tracking bay is open and safe. 2. Loosen the integrated side thumbscrew on the mounting base counter-clockwise to expand the rail capture jaw. 3. Position the light flush onto your chosen top or side Picatinny slot rail index line, pressing down firmly until the cross-bolt nests inside the lug groove. 4. Spin the thumbscrew clockwise by hand until it binds tight, ensuring a rock-solid clamp without requiring specialized tools that could warp the synthetic rail base. 5. Twist the front bezel head counter-clockwise a quarter turn to clear the physical lock-out channel—this serves as a mechanical lockout safeguard to prevent accidental white-light discharge during daylight transport. 6. Test operational settings by engaging the lateral mechanical flip switch: flip the toggle forward to activate the 850nm covert IR beam, or flip it rearward to deploy the high-intensity white light downrange.*
Key Features
- Dual Spectrum White & IR Emitters: Combines a brilliant 450-lumen visible white beam with a covert 850nm infrared light engine, providing seamless integration for low-light or night vision tracking.
- 10,000 Candela Peak Focus: Upgraded Gen 3 optics double the beam concentration of previous generations, focusing a high-candela hotspot that cuts deep into night shadows and blinds targets.
- Ergonomic 45-Degree Pressure Pad: Features an integrated, oversized rear thumb pad angled at 45 degrees, eliminating the need for unreliable external remote tape switches and snag-prone wires.
- Mechanical Spectrum Safety Toggle: Outfitted with a heavy-duty side-mounted flip switch that physical isolates the white and IR circuits, preventing accidental light pollution during covert movements.
- Carbon-Fiber Polymer Hull: Engineered from a high-tensile carbon fiber reinforced polymer composite unibody shell, providing excellent structural rigidity at a mere fraction of metal weight.
- Flip-Up Safety Lockout Bar: Includes a physical folding metal safety bail that hinges over the activation pad, keeping the light completely inert during transport or dense gear storage.
Product Specifications
- Brand: Inforce® / Emissive Energy Corp (Milford, Connecticut / Made Proudly in the USA)
- Model Line: WML Gen 3 Series Ultra-Lightweight Tactical Weapon Illumination Systems
- MPN/SKU Code: IF71013 (WML White/IR Gen 3 Black Polymer Specification Base SKU)
- UPC Code Profile: 810119012029
- Visible Light Output Profile: 450 Lumens Solid-State High-Efficiency White LED Emitter Core
- Covert Light Output Profile: 850nm Infrared (IR) Emitter (100 mW Output Power Rating)
- Peak Beam Intensity Index: 10,000 Candela Concentric Hotspot Center-Focus Array
- Chassis Interface Capability: Integrated Built-In Clamping Base for MIL-STD 1913 Picatinny Rails
- Operational Mode Mapping: Constant-On / Momentary-On / Fast Tactical Strobe Functionality
- Structural Material Base: Premium High-Tensile Carbon-Fiber Reinforced Injection Polymer Composite
- Exterior Finish Dressing: Non-Reflective Solid Infused Matte Black Tactical Surface Coloration
- Spectrum Switching Layout: Lateral Mechanical Flip Toggle Select Switch (Covert IR / Visible White)
- Primary Battery Core Supply: 1x High-Energy CR123A 3-Volt Lithium Primary Cell (Included)
- Runtime Performance Depth: Up to 1.5 Hours Continuous White Output | Up to 4.0 Hours Covert IR Deployment
- Full Kit Component Checklist: 1x WML White/IR Gen 3 Light Assembly, 1x CR123A Battery, Reference Spec Sheet
- Packaging Format Class: Factory Original Sealed Inforce Heavy-Wall Clear Clamshell Presentation Box
- Product Type Category: Rifle Accessories / Dedicated Low Profile Long-Gun Weapon Lights
- Overall Structural Unit Width: ~1.35 Inches (~34.3 mm Low-Profile Side Frame Clearances)
- Overall Physical Component Length: ~4.25 Inches (~107.9 mm Total Assembled Linear Space)
- Net System Operating Mass: ~3.20 Ounces (~90.7 Grams Ultra-Lightweight Forward Balance Weight)
- Environmental Protection Class: IPX7 Rated Waterproof Sealed Hull down to 66 Feet / Shockproof Core
- Warranty Tracking Protection: Fully Backed by Inforce Factory Limited Lifetime Product Guarantee
