*CONTACT US FOR A SPECIAL COUPON CODE*
Lancer Systems L7AWM® GEN 2 Advanced Warfighter Magazine - .308 Winchester / 7.62x51mm NATO / 6.5 Creedmoor, 20-Round Capacity, Hardened Steel Feed Lips & Front Magazine Catch, Hybrid Polymer Body, Translucent Dark Earth (TDE) Finish - L7-G2-20-TDE / 738435624569
Product Description
Feeding heavy-recoil large-caliber cartridges like .308 Winchester and 6.5 Creedmoor in SR25/AR-10 rifles requires a magazine engineered to handle violent bolt speeds and heavy bolt lug impacts. Standard polymer AR-10 magazines can swell when fully loaded or suffer from feed lip deformation and cracking under recoil, while traditional steel magazines add unnecessary weight and lack visual round-count verification on your bench. The **Lancer Systems® L7AWM® GEN 2 .308 Win / 6.5 Creedmoor 20-Round Magazine (L7-G2-20-TDE / 738435624569)** flatlines these feed and durability limitations, pairing an impact-resistant **Translucent Dark Earth (TDE) polymer body** with **Gen 2 hardened steel feed lips and front catch wrap**.
Proudly designed, engineered, and manufactured in Quakertown, Pennsylvania by Lancer Systems, the Gen 2 L7AWM magazine sets a new benchmark for 7.62mm/.308 weapon reliability. Built with a high-strength polymer body, the Gen 2 features an upgraded, single-piece **wrap-around hardened steel feed lip assembly** that extends down to reinforce the front magazine catch tower and rear spine interface. This hybrid steel architecture prevents feed lip spreading under long-term fully loaded storage and resists violent bolt impacts under rapid semi-automatic or suppressed firing schedules. Complete with a non-tilt follower, stainless steel spring, and translucent side walls for instant visual ammunition inspections, this 20-round magazine optimizes your precision AR-10 build straight from your armorer bench.
Engineered to lock natively into standard SR25 / DPMS Pattern AR-10 lower receivers (LMT, KAC, SIG 716, Ruger SFAR, Aero M5), this factory-calibrated magazine guarantees flawless cartridge presentation directly from your workspace bench.
*Armorer Bench Notes & Real-World AR-10 Staging Guidance: The Lancer L7-G2-20-TDE magazine arrives workspace ready as a pre-assembled 20-round hybrid feeding unit. CALIBER & RECEIVER FITMENT MATRIX: This magazine is engineered natively for **.308 Winchester, 7.62x51mm NATO, 6.5 Creedmoor, and 6.5 PRC** cartridges. *Receiver Standard Checklist:* Fits standard **SR25 / DPMS Pattern / Armalite AR-10A lower receivers** (does *not* fit Armalite AR-10B pattern lowers requiring proprietary steel mags). Armorer Workbench Custom Staging Sequence: 1. Visually and physically confirm your host AR-10/SR25 rifle is completely clear of live ammunition, the magazine is removed, and the chamber is checked safe and empty. 2. Inspect the steel feed lips and non-tilt follower to ensure no transit debris or oil obstructs vertical travel. 3. Load up to 20 rounds of .308 Win, 7.62x51 NATO, or 6.5 Creedmoor ammunition into the staggered column. 4. Verify round counts and seating depth at a glance through the Translucent Dark Earth polymer body walls. 5. Insert the loaded magazine into the lower receiver until the magazine catch locks with a distinct metallic click. 6. Cycle the bolt carrier manually to verify smooth, uninhibited cartridge pickup over the barrel extension feed ramps before rolling downrange.*
Key Features
- Hardened Steel Wrap-Around Feed Lips: One-piece hardened steel top assembly is permanently molded into the polymer body, eliminating feed lip spreading or deformation under heavy recoil.
- Gen 2 Reinforced Front Magazine Catch Tower: Upgraded steel wrap extends around the front catch interface to prevent lockup wear and ensure rock-solid receiver retention.
- Translucent Dark Earth (TDE) Polymer Body: High-impact polymer body provides instant visual verification of remaining round counts, bullet type, and seating depth.
- Engineered for .308 Win & 6.5 Creedmoor: Smooth internal geometry and constant-curve column optimize cartridge feed angles for short-action precision rifle cartridges.
- Non-Tilt Follower & Stainless Steel Spring: Precision polymer non-tilt follower driven by a heavy-duty stainless steel spring maintains uniform upward tension under rapid fire.
- Aggressive Surface Texturing & Drain Ports: Features raised exterior grid texturing for secure handling with gloved hands and bottom floorplate drain holes to clear water.
Product Specifications
- Brand: Lancer Systems® (Quakertown, PA / Made in the USA)
- Model Line: L7AWM® GEN 2 (Advanced Warfighter Magazine) Series
- MPN/SKU Code: L7-G2-20-TDE (L7AWM Gen 2 20rd Translucent Dark Earth SKU)
- UPC Code Profile: 738435624569
- Caliber Action Standardization: .308 Winchester / 7.62x51mm NATO / 6.5 Creedmoor / 6.0 Creedmoor
- Magazine Capacity Floor: 20 Rounds Total Payload Capacity
- Host Rifle Fitment: Standard SR25 / DPMS Pattern / Aero M5 / KAC / LMT / SIG 716 / Ruger SFAR
- Structural Material Base: Translucent Hybrid Polymer Body with Molded Steel Feed Lips
- Feed Lip Construction: Gen 2 One-Piece Hardened Steel Hybrid Wrap-Around Feed Structure
- Floorplate Accent Finish: Matching Dark Earth Impact-Resistant Polymer Baseplate
- Internal Spring Component: Corrosion-Resistant Heavy-Duty Stainless Steel Wire Spring
- Exterior Body Finish: Translucent Dark Earth (TDE) High-Transmittance Polymer Dressing
- Full Kit Component Checklist: 1x Lancer L7AWM Gen 2 20rd Translucent Dark Earth Magazine
- Packaging Format Class: Factory Original Sealed Lancer Systems Header Poly Bag
- Product Type Category: Rifle Accessories / Large Format Hybrid Polymer Steel Magazines
- Net Component Mass: ~6.40 Ounces (~181.4 Grams Hybrid Steel/Polymer Mass)
- Global Quality Certifications: Formulated to Rigid US Professional Duty and Military Spec Metrics
- Warranty Tracking Protection: Fully Backed by Lancer Systems Factory Limited Warranty
