*CONTACT US FOR A SPECIAL COUPON CODE*
Langdon Tactical Tech LTTTJOPN Trigger Job In A Bag NP3 Finish Elite II Hammer LTT Optimized Performance Trigger Bar Beretta 92 96 M9 Not A1 UPC 810059260276
Product Description
The Langdon Tactical Technology® (LTT) Trigger Job In A Bag (SKU: LTTTJOPN / MPN: LTT-TJ-OPN / UPC: 810059260276) brings Ernest Langdon's renowned custom shop fire-control geometry directly to your workbench for Beretta 92, 96, and M9 series pistols. Hand-stoned and precision-polished by LTT armorers, this complete drop-in fire-control group eliminates factory trigger grit, dramatically reduces double-action stack, and shortens single-action reset to near-zero for competition, duty, and defensive carry.
Every primary contact component is treated in genuine NP3® electroless nickel-PTFE (Teflon) plating. Unlike conventional surface coatings that wear off high-friction contact zones, NP3 embeds sub-micron PTFE particles uniformly throughout a hard nickel matrix—providing permanent dry lubricity, imperviousness to carbon fouling and harsh solvents, and glass-smooth engagement across the sear, hammer hooks, and trigger bar without requiring excess oil.
Anchoring the kit is the proprietary LTT Optimized Performance Trigger Bar paired with the skeletonized Beretta Elite II Hammer and a chrome-silicon reduced-power hammer spring. Together, these components cut lock time, remove double-action staging wall resistance, and establish a crisp, repeatable 3.5 to 4.0 lb single-action break with an ultra-short tactile reset that keeps your sights locked on target during rapid strings of fire.
*Armorer Bench Notes & Real-World Staging Guidance:*
Fitment Matrix: Compatible with Beretta 92FS, 92F, 92SB, 92G, 92X (Full-Size/Centurion/Compact), 96, M9, and M9A3/M9A4 models. CRITICAL FITMENT EXCLUSION: Will NOT fit Beretta 92A1, 96A1, 90-Two, 92S, or frame-mounted safety 92XI / 92X Performance pistols. Retain original factory parts and verify reliable primer ignition with your chosen duty or defensive ammunition after installation.
- Ensure the Beretta pistol is completely clear: remove the magazine, lock the slide to the rear, and visually and physically inspect the chamber to confirm zero ammunition is present.
- Field-strip the slide from the frame, remove the grip panels, and carefully relieve tension from the trigger return spring, sear pin, hammer pin, and hammer spring cap at the base of the grip.
- Install the NP3-coated LTT Optimized Performance Trigger Bar, precision-stoned sear, sear spring, and trigger return spring into the frame chassis, verifying free rotational movement without binding.
- Seat the NP3 Elite II Hammer, hammer strut, and reduced-power chrome-silicon hammer spring into the mainspring housing, securing the hammer spring cap pin flush with the frame.
- Reinstall the grips and slide, then perform a thorough dry-fire safety check: verify smooth double-action staging, crisp single-action break, positive trigger reset under slide cycling, and full hammer block / firing pin safety engagement before live-fire testing.
Key Features
- Complete LTT Custom Shop Fire-Control Kit: Includes LTT Optimized Performance Trigger Bar, Beretta Elite II Hammer, hand-stoned Sear, Hammer Strut, Sear Spring, Trigger Spring, and Reduced-Power Hammer Spring.
- Self-Lubricating NP3® Finish: Electroless nickel-PTFE plating reduces friction coefficients, prevents galling, and resists corrosion and powder fouling without heavy wet lubrication.
- LTT Optimized Performance Trigger Bar: Re-engineered cam and disconnector geometry eliminates trigger creep and shortens single-action reset for faster split times.
- Skeletonized Elite II Hammer: Lightweight hammer profile accelerates lock time and sharpens single-action break consistency.
- Refined DA/SA Pull Weights: Produces a smooth 6.3 – 7.0 lb double-action pull (with 13 lb spring) and a crisp, predictable 3.5 – 4.0 lb single-action release.
- Drop-In Bench Installation: Pre-stoned and matched by Langdon Tactical technicians for installation without specialized gunsmith machining.
Product Specifications
- Brand: Langdon Tactical Technology® (LTT)
- Model/Series: Trigger Job In A Bag – Optimized Performance NP3
- MPN / SKU: LTT-TJ-OPN / LTTTJOPN
- UPC: 810059260276
- Finish / Coating: NP3® Electroless Nickel-PTFE (Teflon) / Stainless
- Hammer & Trigger Bar: Beretta Elite II Hammer & LTT Optimized Performance Trigger Bar
- Pull Weight Rating: ~6.3 – 7.0 lbs DA (13# Spring) / 3.5 – 4.0 lbs SA
- Platform Compatibility: Beretta 92FS, 92F, 92SB, 92G, 92X, 96, M9, M9A3/M9A4 (NOT 92A1 / 96A1)
- Country of Origin: USA
