LBE Unlimited AKRPLT AK-47 Trigger Pin Retaining Plate - AKRPLT

LBE Unlimited AKRPLT Retaining Plate Recoil Spring Stop for AK Pattern Rifles Steel Construction Black AKRPLT UPC 706612408431

Product Description

The LBE Unlimited AKRPLT Retaining Plate is an essential fire control group (FCG) upgrade and replacement component designed for AK-47, AK-74, and AK-pattern rifles and pistols. Engineered to replace the unreliable, bent-wire "shepherd's crook" retention spring found in standard factory AK receivers, this heavy-duty steel plate permanently locks the hammer and trigger axis pins into position, preventing pin walking, receiver wear, and trigger group failures.

Precision-stamped from high-strength carbon steel and treated with a durable black oxide protective finish, the AKRPLT resists surface corrosion, harsh propellant carbon, and violent recoil vibration. Its rigid, flat profile slides directly into the receiver along the left inner wall, engaging the axis pin grooves with positive mechanical tension to ensure your trigger pins stay fully seated during sustained firing schedules.

In addition to securing the fire control group, the plate acts as a alignment guide near the rear interface of the receiver. Quick and simple to install or remove during routine cleaning, the LBE Unlimited AKRPLT is a crucial piece of preventative maintenance hardware for any AK builder, shooter, or armorer looking to increase receiver reliability.

Armorer Bench Notes & Real-World Staging Guidance:
Fitment Matrix: Fits virtually all standard stamped and milled AK-47, AK-74, and AK-M pattern receivers (including WASR, SAM7, ZPAP, PSAK, WBP, and similar variants). Compatible with standard factory and aftermarket single-stage or two-stage AK triggers.

1. Perform a complete firearm safety check: remove the magazine, rack the charging handle rearward, and visually inspect the chamber to verify zero live rounds are present.
2. Remove the top receiver dust cover, recoil spring assembly, and bolt carrier group.
3. Carefully remove the factory wire shepherd's hook or spring retainer using needle-nose pliers or a small punch.
4. Ensure the trigger and hammer axis pins are pushed fully into the receiver from right to left so their outer retention grooves align internally.
5. Slide the LBE AKRPLT retaining plate into the left side of the receiver, hooking the forward slot onto the hammer pin groove first, then pivoting the plate down to snap into the trigger pin groove.
6. Install the safety selector lever over the rear tab of the retaining plate to lock the entire assembly permanently in place before reassembling the bolt carrier group and dust cover.

Key Features

• Permanent Pin Retention: Replaces flimsy factory shepherd's crook wire to completely eliminate trigger and hammer axis pin walking.
• Heavy-Duty Stamped Steel: Constructed from rigid carbon steel to withstand extreme operational vibration and recoil impulse.
• Corrosion-Resistant Black Finish: Protective coating shields against chemical solvent degradation, moisture, and carbon pitting.
• Fast Drop-In Installation: Installs into AK-pattern lower receivers in minutes without requiring permanent modification or fitting.
• Universal AK Pattern Fitment: Compatible with stamped and milled receivers across major AK-47 and AK-74 platforms.
• Prevents Receiver Damage: Eliminates egging or enlargement of receiver axis pin holes caused by loose, shifting pins.

Product Specifications

• Brand: LBE Unlimited
• Model/Series: AK Trigger Pin Retaining Plate
• MPN / SKU: AKRPLT
• UPC: 706612408431
• Platform Fitment: AK-47 / AK-74 / AKM / AK-Pistols (Stamped & Milled)
• Material: Stamped Carbon Steel
• Finish / Color: Black Oxide
• Function: Secures Hammer & Trigger Axis Pins
• Weight: 0.3 oz
• Country of Origin: USA