Leupold

Leupold Mark AR 30mm 1-Piece Cantilever Scope Mount Matte Black - 177094

MSRP: $119.99
$87.95
( saved $32.04 )
No reviews yet Write a Review
Adding to cart… The item has been added
SKU:
177094
UPC:
030317022112
  • $7.95 Flat Rate Shipping

  • Easy Returns

  • Safe Payments

  • The Best Products

Leupold Mark AR 1 Piece Mount System 30mm Rings Matte Black 177094 LP177094 UPC 030317022112

Product Description

The Leupold® Mark AR™ 1-Piece Integral Mount System (SKU: 177094 / LP177094 / UPC: 030317022112) is a rugged, precision-machined cantilever optic mount engineered to place any 30mm riflescope at the optimal optical height and forward eye relief on flat-top AR-15, M4, and AR-10 rifles. Designed specifically for Modern Sporting Rifles (MSRs), this 1-piece integrated base-and-ring architecture eliminates alignment variables between separate rings while projecting your optic forward for a natural cheek weld and unobstructed charging handle access.

Machined in the USA from solid 6061-T6 aircraft-grade aluminum and finished in a glare-reducing Matte Black hardcoat anodize, the Mark AR mount balances lightweight agility (5.6 ounces) with heavy-recoil durability. Three integral bottom recoil lugs key directly into MIL-STD-1913 Picatinny cross-slots to prevent forward or rearward shift under sustained semi-automatic fire, while Leupold's 5-bolt side-clamp system locks the base onto the upper receiver rail with high clamping force.

Built for duty carbines, 3-Gun competition rigs, and precision tactical builds, the Mark AR 30mm mount features four Torx fasteners per ring cap to distribute clamping pressure evenly around the optic tube without marring or pinching internal erector assemblies. Backed by Leupold's legendary lifetime performance guarantee, it provides a rock-solid, repeatable link between your rifle and glass.

*Armorer Bench Notes & Real-World Staging Guidance:*

Fitment Matrix: Fits all 30mm main tube riflescopes mounted on AR-15, M4, AR-10, SR-25, and LR-308 platforms equipped with a continuous MIL-STD-1913 Picatinny upper receiver rail. CRITICAL: Fits 30mm optic tubes ONLY—will NOT fit 1-inch (MPN 177093) or 34mm (MPN 177095) scope tubes. Because the base incorporates 3 integral bottom recoil lugs, it requires standard MIL-STD-1913 Picatinny slot spacing and will NOT seat properly on legacy Weaver rails. Never bridge the mount across the upper receiver and handguard seam. Torque the 5 base clamp nuts to 65 in-lbs and the Torx ring cap screws in an alternating criss-cross pattern to 28 in-lbs max (or the optic manufacturer's specified limit if lower) on dry threads.

  1. Ensure the host firearm is completely clear, magazine removed, and chamber visually and physically verified empty before beginning installation.
  2. Degrease the upper receiver MIL-STD-1913 Picatinny rail slots and the underside of the Mark AR mount base, then seat all 3 integral recoil lugs forward against the receiver rail cross-slots without bridging onto the handguard.
  3. Install the side clamp bar and torque all 5 base nuts evenly from the center outward to 65 in-lbs using a calibrated inch-pound torque wrench.
  4. Place the 30mm riflescope into the lower ring saddles, adjust forward/aft eye relief at maximum magnification, plumb the reticle to the receiver, and position the top ring caps evenly.
  5. Tighten the Torx ring cap screws gradually in an alternating X-pattern up to 28 in-lbs maximum (never exceeding the optic manufacturer's tube torque spec), verify uniform cap gaps, and confirm zero on the range.

Key Features

  • 1-Piece Integrated Cantilever Architecture: Combines the base and 30mm rings into a single 6061-T6 aluminum unit to eliminate alignment errors and provide forward eye relief on AR receivers.
  • 5-Bolt Clamping System & 3 Integral Recoil Lugs: Five cross-bolts paired with three bottom Picatinny recoil lugs withstand heavy recoil and prevent zero shift under rapid fire.
  • Optimal 1.40-Inch AR Optical Height: Positions 30mm Low Power Variable Optics (LPVOs) and tactical scopes at an ergonomic cheek-weld height above standard flat-top MSR receivers.
  • Lightweight 5.6-Ounce Profile: Keeps overall rifle balance agile and fast-handling without sacrificing structural rigidity.
  • Made in the USA & Lifetime Guaranteed: Precision-manufactured in Beaverton, Oregon, and backed by Leupold's lifetime guarantee against defects and failure.

Product Specifications

  • Brand: Leupold®
  • Model/Series: Mark AR™ 1-Piece Integral Mount System
  • MPN / SKU: 177094 / LP177094
  • UPC: 030317022112
  • Tube Diameter: 30mm
  • Elevation Cant: 0 MOA
  • Optical Centerline Height: 1.40"
  • Overall Length / Ring Spacing: 5.83" Overall Length / 2.75" Inner Ring Spacing
  • Material & Finish: CNC-Machined 6061-T6 Aluminum / Matte Black Anodized
  • Base Clamping Torque: 65 in-lbs (5-Bolt Picatinny Clamp)
  • Ring Cap Torque: 28 in-lbs Max (Torx Fasteners)
  • Platform Compatibility: AR-15, M4, AR-10, SR-25, LR-308 (MIL-STD-1913 Picatinny)
  • Country of Origin: Made in the USA