** PLEASE USE COUPON CODE " MAGPUL10 " WITH THIS ITEM! **
Magpul DT S Carbine Stock Mil Spec Dual Tension Adjustment Storage Olive Drab Green MAG1555 ODG UPC 840815151005
Product Description
The Magpul® DT-S™ Carbine Stock (SKU: MAG1555-ODG / UPC: 840815151005) represents the evolution of collapsible carbine furniture, integrating Magpul’s advanced Dual Tensioning (DT) mechanism with onboard waterproof mission-critical storage. Engineered specifically for professional operators, tactical law enforcement, and defensive carbine shooters running Mil-Spec receiver extensions, this Olive Drab Green stock delivers an unwavering, rock-solid lockup that eliminates secondary wobble and receiver extension rattle under severe operational use.
Molded from proprietary high-impact, heat-resistant reinforced polymer, the DT-S chassis is built to withstand extreme thermal variations, heavy impact, and aggressive field environments without cracking or deforming. Sealed within the wide cheek rest geometry are two independent, dual O-ring capped storage tubes that provide watertight battery protection submersible down to 10 meters (33 feet). Each storage compartment secures up to two CR123A lithium cells or two standard AA batteries in an anti-rattle configuration, ensuring critical weaponlight and night vision electro-optics maintain immediate onboard power reserves in the field.
Ergonomics are prioritized through a sloped, broadened cheek weld that promotes consistent, repeatable eye alignment behind optical sights while enhancing comfort during long training sessions and observation watches. The integrated non-slip rubber butt-pad adapts the optimized curvature of the CTR® line for dynamic shoulder transitions and body armor integration, while the ambidextrous, low-profile adjustment lever protects against accidental snagging and unintended stock release in heavy brush or vehicle operations.
*Armorer Bench Notes & Real-World Staging Guidance:*
Fitment Matrix: Direct fit on all 1.148-inch outer diameter standard Mil-Spec carbine receiver extension tubes across AR-15, M4, AR-10, and SR-25 platforms. CRITICAL: Will NOT fit Commercial-Spec (1.168-inch OD) buffer tubes. Forcing this stock onto an oversized commercial extension will fracture the internal lockup assembly. Inspect the receiver extension surface for excessive carbon, burs, or dry film build-up prior to installation. Dual storage cap O-rings should be periodically inspected and lightly conditioned with pure silicone grease to preserve 10-meter watertight sealing.
- Ensure the host firearm is completely clear, magazine removed, and chamber visually and physically verified empty.
- Inspect the host carbine buffer tube to confirm true Mil-Spec diameter (1.148 inches) and clean any foreign grit from the detent track.
- Depress and hold the primary release latch completely downward, then grasp the exposed cross-pin mechanism or lower lever ears to fully retract the locking cross-pin past the detent line.
- Slide the DT-S stock body forward onto the receiver extension tube until the locking pin snaps into the desired forward adjustment detent position.
- Perform a comprehensive staging check: cycle through all length-of-pull positions to verify positive detent engagement, test the internal Dual Tensioning friction lock for wobble-free retention, verify QD sling swivel socket rotation limits, and hand-tighten both waterproof storage tube caps securely.
Key Features
- Dual Tensioning (DT) Lockup System: Auto-engaging internal tensioners exert direct upward friction against the buffer tube detent track, eliminating play and structural wobble without manual friction clamps.
- 10-Meter Waterproof Onboard Storage: Twin O-ring sealed compartments protect up to four CR123A or four AA batteries, spare bolts, or small survival gear dry down to a 33-foot water depth.
- Optimized Wide Cheek Weld: Sloping, ergonomic comb contours provide improved head support and consistent cheek indexing behind red dots, LPVOs, and prism sights.
- Shielded Ambidextrous Release Lever: Streamlined, snag-resistant release latch geometry prevents accidental collapse when slung against plate carriers or outdoor gear.
- Multi-Option Sling Integration: Outfitted with an ambidextrous, rotation-limiting push-button QD socket accommodating up to 1.5-inch swivels and an integrated rear 1.25-inch footman’s loop.
- Curved Non-Slip Rubber Butt-Pad: Combines the SL line footprint with CTR roll-over geometry to facilitate seamless weapon mounting from low-ready while wearing tactical gear.
Product Specifications
- Brand: Magpul Industries®
- Model/Series: DT-S™ Carbine Stock – Mil-Spec
- MPN / SKU: MAG1555-ODG / MAG1555ODG
- UPC: 840815151005
- Color/Finish: Olive Drab Green (ODG), Matte Non-Reflective
- Chassis Metallurgy / Material: High-Impact Reinforced Polymer & Hardened Steel Internals
- Receiver Extension Fitment: Mil-Spec Diameter Carbine Buffer Tubes (1.148 in OD)
- Length of Pull (LOP) Collapsed: ~11.0 in (279 mm)
- Length of Pull (LOP) Extended: ~14.3 in (363 mm)
- LOP Adjustment Range: 3.3 in (84 mm)
- Overall Length: 7.4 in (188 mm)
- Maximum Width: 2.5 in (64 mm)
- Maximum Height: 5.3 in (135 mm)
- Waterproof Storage Rating: Submersible to 10 m (33 ft)
- Storage Capacity: Up to (4) CR123A or (4) AA Batteries
- Sling Attachment Points: Rotation-Limiting QD Sling Socket, 1.25 in Footman’s Loop
- Platform Compatibility: AR-15, M4, AR-10, M110, SR-25 with Mil-Spec Carbine Receiver Extensions
- Country of Origin: Made in USA
