Magpul Industries

Magpul PRS Lite Lightweight Precision Stock Mil-Spec Carbine FDE - MAG1159-FDE

MSRP: $119.95
$113.94
( saved $6.01 )
No reviews yet Write a Review
Adding to cart… The item has been added
SKU:
MAG1159-FDE
UPC:
840815132264
  • $7.95 Flat Rate Shipping

  • Easy Returns

  • Safe Payments

  • The Best Products

*CONTACT US FOR A SPECIAL COUPON CODE*

Magpul PRS Lite Lightweight Purpose Built Stock FDE MAG1159 FDE UPC 840815130314

Product Description

The Magpul® PRS Lite Lightweight Purpose-Built Stock in Flat Dark Earth (SKU: MAG1159-FDE / UPC: 840815130314) delivers the ergonomic precision and shooter-tunable geometry of the flagship PRS Gen3 platform at roughly half the mass and substantially reduced bulk. Purpose-built for designated marksman rifles (DMR), SPR builds, and precision AR-15 or AR-10/SR-25 carbines, the PRS Lite trims 10 ounces compared to its full-size predecessor while maintaining rock-solid lockup and repeatable cheek-to-optic alignment.

Constructed from Magpul’s proprietary high-strength, injection-molded reinforced polymer paired with precision-machined, MIL-A-8625 Type III hardcoat anodized aluminum adjustment components, the PRS Lite resists extreme impact, thermal cycling, and harsh cleaning solvents without warping or developing receiver extension play. A rigid, non-rattling clamp interface locks the stock solidly onto the buffer tube, eliminating the micro-movement common to standard collapsible stocks during prone or barricaded precision engagements.

Shooters can fine-tune Length-of-Pull across a 1.4-inch range (13.85" to 15.25" on standard AR-15 receivers) and dial in 0.8 inches of vertical comb elevation using a standard 1/8-inch hex wrench, locking settings down against heavy recoil. The low-profile rubberized butt-pad adjusts for both height and cant to fit varying shoulder pockets and body armor profiles, while a reversible QD sling cup, ambidextrous 1.25-inch footman’s loop, and bottom M-LOK slots provide complete sling and rear-bag/monopod modularity.

*Armorer Bench Notes & Real-World Staging Guidance:*

Fitment Matrix: Compatible with Mil-Spec diameter (1.148") AR-15 carbine receiver extensions, SR-25/M110 carbine extensions, and VLTOR A5 intermediate receiver extensions. CRITICAL EXCLUSION: Will NOT fit Commercial-Spec (1.168") carbine buffer tubes or Rifle-length (A1/A2) fixed buffer tubes. Torque all 1/8" hex adjustment locking screws to 25-30 in-lbs; do not over-torque polymer clamping bosses.

  1. Ensure the host firearm is completely clear, magazine removed, and chamber visually and physically verified empty before beginning installation.
  2. Remove any existing collapsible buttstock from the Mil-Spec carbine or A5 receiver extension and inspect the buffer tube exterior for burrs, debris, or thread damage.
  3. Back out the primary receiver extension clamp screw on the PRS Lite using a 1/8" hex wrench, slide the stock fully forward onto the buffer tube until the internal index lug engages the tube channel, and seat it firmly against the endplate/castle nut.
  4. Torque the primary clamping fastener to 25-30 in-lbs, then adjust comb height, Length-of-Pull, and butt-pad cant/elevation to match your optic centerline and shooting stance before locking the adjustment screws.
  5. Verify full charging handle travel without cheek-riser interference (critical on AR-10/SR-25 large-frame receivers), confirm zero stock rotation, and complete a full function check prior to live-fire staging.

Key Features

  • Ultralight Precision Chassis: Weighs just 18.2 oz—saving 10 full ounces over the standard PRS Gen3—to preserve rifle balance during off-hand movement and positional shooting.
  • Tunable Comb & Length-of-Pull: Provides 0.8" of vertical cheek-riser adjustment and 1.4" of Length-of-Pull travel (13.85" to 15.25" LOP) with positive hex-screw lockup.
  • Height & Cant Adjustable Butt-Pad: Co-molded rubberized pad absorbs recoil impulse while allowing vertical and angular customization for prone, bench, or plate-carrier use.
  • Broad Carbine & A5 Tube Compatibility: Clamps rigidly onto Mil-Spec (1.148") AR-15 carbine, SR-25 carbine, and VLTOR A5 receiver extensions without specialized rifle-length tubes.
  • Full Sling & M-LOK Modularity: Includes a reversible rotation-limited QD sling swivel cup, ambidextrous 1.25" footman’s loop, and bottom toe M-LOK slots for monopods or bag riders.

Product Specifications

  • Brand: Magpul Industries Corp.®
  • Model/Series: PRS Lite Lightweight Purpose-Built Stock
  • MPN / SKU: MAG1159-FDE / MAG1159FDE
  • UPC: 840815130314
  • Finish / Color: Flat Dark Earth (FDE)
  • Material: Reinforced Injection-Molded Polymer & Hard-Anodized Aluminum
  • Length-of-Pull (LOP) Range: 13.85" to 15.25" (1.4" Adjustment Travel)
  • Comb Height Adjustment: 0.8" Vertical Travel
  • Overall Length: 11.4" to 12.8"
  • Platform Compatibility: AR-15 / M4, SR-25 / AR-10 (Mil-Spec 1.148" Carbine & VLTOR A5 Buffer Tubes Only)
  • Country of Origin: Made in the USA