** PLEASE USE CODE MICROTECH40 WITH THIS ITEM **
Microtech UTX 85 Gen IV Signature Series 3.12 Inch M390MK Black Blade Blue X 51 Aluminum Handle 12324 1BLX51S UPC 810222589234
Product Description
The Microtech® UTX-85® Gen IV Signature Series (SKU: 12324-1BLX51S / UPC: 810222589234) scales the iconic Ultratech® platform down to a streamlined 85% everyday-carry footprint without sacrificing tactical authority. Engineered as a dual-action out-the-front (OTF) automatic, the fourth-generation UTX-85 incorporates Microtech’s redesigned milled thumb-slide track that actively clears pocket debris while delivering noticeably lighter, smoother firing and retraction than prior generations.
Forged from Microtech’s exclusive Böhler M390MK stainless powder-metallurgy super steel, the 3.12-inch symmetrical double-edge (D/E) dagger blade delivers elite edge retention, high compressive strength, and superior corrosion resistance. The flat-ground dual plain edges terminate in a needle-sharp piercing tip, finished in Microtech’s classic Standard two-tone configuration pairing glare-reducing black DLC flats and fullers with satin-ground bevels and Signature Series blade markings.
Its contoured 6061-T6 aircraft-grade aluminum chassis features a striking Blue X-51 anodized scale-pattern finish mated to black stainless steel Torx body fasteners for straightforward user maintenance. Outfitted with a reversible tip-down milled titanium pocket clip utilizing a ceramic retention ball and a low-profile stainless glass breaker, the UTX-85 Gen IV offers rock-solid ergonomics and discreet pocket carry for duty, defense, or refined EDC.
*Bladesmith Bench Notes & Field Maintenance Guidance:*
Deployment, Carry & Metallurgy Advisory: Dual-Action Out-The-Front (OTF) automatic with Böhler M390MK stainless dagger blade and 6061-T6 aluminum chassis. CRITICAL OTF CARE: Never flood an OTF chassis with heavy grease or thick lubricants, which attract pocket lint and induce firing failures. Sharpen at 20 degrees per side on diamond or ceramic stones, use quality T6/T8 Torx drivers to avoid stripping hardware, and verify all federal, state, and local automatic knife laws before purchasing or carrying.
- Verify the blade path and work area are completely clear of obstructions, keeping fingers clear of the front blade aperture and thumb-slide track during initial inspection.
- Cycle the thumb slide firmly forward and rearward several times to confirm crisp dual-action lockup and purge any excess factory preservative oil from the front opening with a clean lint-free cloth.
- To reverse the milled titanium pocket clip for left-hand tip-down carry, unthread the rear glass-breaker fastener with the proper driver, flip the clip, apply a trace of non-permanent blue threadlocker, and snug securely without over-torquing.
- For routine OTF track maintenance, blow out internal lint with compressed air, apply a single drop of ultra-light synthetic lubricant (such as Rem Oil) to the base of the blade tang, cycle the blade, and wipe the blade completely dry.
- Perform a final lockup verification by testing for positive engagement in both open and closed positions before staging in your pocket.
Key Features
- Böhler M390MK Double-Edge Dagger Blade: Exclusive Microtech-formulated 3.12" powder-metallurgy stainless super steel with two-tone black/satin Standard finish offers exceptional wear resistance, corrosion immunity, and symmetrical piercing geometry.
- Blue X-51 Contoured 6061-T6 Aluminum Chassis: Precision-milled aircraft-grade aluminum handle features distinctive Blue X-51 scale-pattern anodizing and ergonomic contouring for secure traction in a compact 4.38" closed profile.
- Gen IV Dual-Action OTF Thumb-Slide Architecture: Upgraded internal drive springs and a milled debris-clearing switch platform provide effortless one-handed deployment and retraction with reduced thumb fatigue.
- Milled Titanium Clip & Torx Hardware: Equipped with a reversible tip-down titanium pocket clip featuring a smooth ceramic ball contact point, black stainless Torx chassis screws, and an integrated glass breaker.
Product Specifications
- Brand: Microtech Knives®
- Model/Series: UTX-85® Gen IV Signature Series
- MPN / SKU: 12324-1BLX51S / MIC12324-1BLX51S
- UPC: 810222589234
- Blade Length: 3.12" (79.2 mm)
- Blade Thickness: 0.125" (3.18 mm)
- Overall Length (OAL): 7.52" (191.0 mm)
- Closed / Handle Length: 4.38" (111.3 mm)
- Blade Steel: Böhler M390MK Stainless Steel (60–62 HRC)
- Blade Style / Grind: Double-Edge (D/E) Dagger / Flat Grind
- Blade Finish / Color: Standard Two-Tone Black & Satin
- Edge Type: Plain (Dual Edge)
- Handle Material / Color: 6061-T6 Aluminum / Blue X-51 Anodized
- Locking / Action Mechanism: Dual-Action OTF Automatic (Thumb Slide)
- Pocket Clip / Sheath: Reversible Tip-Down Milled Titanium Clip w/ Ceramic Ball
- Weight: 3.10 oz (87.9 g)
- Country of Origin: USA