** PLEASE USE CODE NIGHTCORE18 WITH THIS ITEM **
Nitecore UTL19 1800 Lumen 5 in 1 Rechargeable Utility Flashlight Utility Cutter UV Light Green Laser NCUTL19 UPC 6952506410194
Product Description
The Nitecore® UTL19 5-in-1 Utility Flashlight & Cutter (SKU: UTL19 / NCUTL19 / UPC: 6952506410194) consolidates five essential worksite, warehouse, inspection, and everyday carry tools into a single pocket-ready chassis. Designed for technicians, inspectors, emergency responders, and tactical users operating in low-light environments, the UTL19 pairs an 1,800-lumen multi-beam M515S LED work light with a retractable replaceable utility razor blade, a 1,350 mW 365 nm UV inspection emitter, a Class 3R green aiming laser, and a ceramic-tipped emergency glass breaker.
Engineered for hard daily duty, the UTL19 housing combines an aerospace-grade aluminum alloy core finished in wear-resistant Type III hard anodizing with PVD-coated high-strength stainless steel reinforcement across high-abrasion zones. The integrated Advanced Temperature Regulation (ATR) module dynamically modulates thermal output during sustained high-lumen runs, while the sealed chassis achieves an IP67 ingress protection rating against dust and water immersion alongside 1-meter drop impact resistance. An onboard 1,500 mAh Li-ion battery recharges in approximately 75 minutes via a shielded USB-C port, delivering up to 270 hours of runtime on the 1-lumen ultralow mode.
Operational ergonomics are anchored by an independent M button and tactile slide switch layout, allowing instant beam pattern cycling between wide-angle floodlight, long-throw 220-meter spotlight, and hybrid mixed light with full mode memory. The side-mounted utility blade carriage deploys via a positive-locking slider across three extension stops, letting you illuminate and slice heavy strapping, cardboard, cordage, or insulation one-handed while keeping the blade securely locked inside the housing during pocket carry via the deep-carry stainless steel pocket clip.
*Armorer Bench Notes & Real-World Staging Guidance:*
Fitment Matrix: Universal pocket carry, duty belt, and worksite staging via included stainless steel deep-carry clip and lanyard loop; accepts standard 60 mm × 19 mm × 0.6 mm replacement utility blades. CRITICAL SAFETY & MAINTENANCE NOTES: The internal 1,500 mAh Li-ion battery is sealed and NOT user-replaceable; recharge every 6 months during long-term storage to prevent deep-discharge cell degradation. Avoid direct ocular exposure to the Class 3R green laser (<5 mW, 510–530 nm) and high-output 1,350 mW UV emitter (365–375 nm). Ensure the utility blade slider lock is fully engaged before pocket insertion or USB-C charging.
- Verify the utility blade slide switch is in the fully retracted and locked position before handling, charging, or installing a fresh blade.
- Inspect the blade dock and install the supplied 60 × 19 × 0.6 mm utility blade firmly into the carrier until the retention latch clicks positively into place.
- Connect the included USB-C charging cable to a 5V/2A power source and charge the internal 1,500 mAh Li-ion cell until all four blue power telemetry indicators illuminate solid.
- Cycle the M button and slide switch to verify white light beam pattern memory (Floodlight, Spotlight, Mixed), 3-stage UV output, and independent green laser activation.
- Confirm pocket clip screw tension and lanyard attachment before staging the UTL19 for daily EDC, inspection, or range bag deployment.
Key Features
- 5-in-1 Worksite & EDC Integration: Combines an 1,800-lumen primary white LED, retractable replaceable utility knife, 1,350 mW UV emitter, Class 3R green laser, and ceramic-tipped strike bezel in one tool.
- Triple Selectable Beam Profiles: M515S neutral-white LED (Duv < 0.005) switches seamlessly between 1,800-lumen Floodlight, 800-lumen / 220-meter Spotlight (12,100 cd), and 1,200-lumen Mixed Light.
- Locking Retractable Utility Blade: Side-deployed 60 × 19 × 0.6 mm replaceable utility blade features three extension stops and an independent safety lock for secure one-handed cutting.
- 365 nm UV & Class 3R Green Laser: Dedicated 3-level UV light (200–1,350 mW) detects leaks and fluorescent markings, while the 3-level green laser (<5 mW) operates standalone or simultaneously with white/UV light.
- Rugged Aluminum & Stainless Chassis: Constructed from Type III hard-anodized aerospace aluminum and PVD stainless steel with silicon nitride glass-breaker tips and IP67 waterproof protection.
- Fast USB-C Charging & Glow Locators: Built-in 1,500 mAh Li-ion battery charges in 1 hour 15 minutes via USB-C with 4-LED battery level telemetry and luminescent glow locators for dark-room retrieval.
Product Specifications
- Brand: Nitecore®
- Model/Series: UTL19 Utility Tool & Light
- MPN / SKU: UTL19 / NCUTL19
- UPC: 6952506410194
- Primary Emitter & Output: M515S Neutral White LED, 1,800 Lumens Max, 12,100 cd, 220 m Max Throw
- Secondary Light Sources: 365–375 nm UV LED (200 / 600 / 1,350 mW); Class 3R Green Laser (<5 mW, 510–530 nm)
- Blade Dimensions: 60 mm × 19 mm × 0.6 mm Replaceable Utility Blade (50° Cutting Angle)
- Chassis Materials & Finish: Aerospace Aluminum Alloy (Type III Hard-Anodized) & Stainless Steel (PVD)
- Power Source: Integrated 1,500 mAh Rechargeable Li-ion Battery (USB-C Charging)
- Dimensions & Net Weight: 5.08" L × 1.54" W × 1.06" H (129 × 39 × 27 mm) / 5.22 oz (148 g)
- Ingress & Impact Rating: IP67 Waterproof & Dustproof / 1 Meter Impact Resistant
- Platform Compatibility: Universal EDC Pocket Carry, Duty Gear, Warehouse & Inspection Applications
- Country of Origin: China