Remington Performance WheelGun .38 Special 158 Grain Lead Semi-Wadcutter (MPN: 22271)
Revolver marksmanship demands consistent pressures, clean ignition, and target accuracy designed around wheelgun ergonomics. Remington built their Performance WheelGun series specifically to meet the strict demands of target shooters, competitive revolver marksmen, and handgun purists. Built from the ground up for smooth indexing and tight lockup performance, this 158-grain Lead Semi-Wadcutter (LSWC) loading eliminates the erratic velocities and sticky ejection often found with budget plinking rounds in full-size and snub-nose revolvers alike.
At the center of this load is Remington's high-grade 158-grain lead alloy semi-wadcutter projectile. The sharp shoulder of the semi-wadcutter design cuts paper clean, leaving clear, ring-defined holes that make target scoring instantaneous at the range. Each round is assembled using factory-fresh, high-tensile brass cases, clean-burning target propellants, and non-corrosive Kleanbore primers—the industry standard for reducing barrel corrosion and carbon build-up in cylinder throats.
In the field or at the bench, expect classic .38 Special target dynamics: smooth, predictable felt recoil, minimal muzzle rise, and steady velocity hovering right around 850 FPS from a standard 4-inch barrel. The balanced pressure curve ensures easy cylinder rotation and effortless ejector-rod stroke during quick reloads. Whether you are running timed bullseye courses or spending a afternoon conditioning trigger control, this 50-round box provides factory-grade repeatability with every drop of the hammer.
Armorer Bench Notes & Technical Maintenance Guidance
Shipping Restrictions: Ammunition sales are strictly regulated. Check all state and local laws prior to ordering. Cannot ship to PO Boxes, APO/FPO addresses, or internationally. Must ship via ORM-D / Hazardous Ground transport.
Armorer Tip: Firing soft lead alloy projectiles can accumulate lead wash near the forcing cone and inside the rifling over time. Clean your barrel with a copper/brass bore brush and a dedicated lead-dissolving solvent after extended range sessions. Avoid firing full-power jacketed .357 Magnum ammunition through the same revolver without thoroughly scrubbing the cylinder chambers first to prevent pressure spikes caused by carbon and lead ring accumulation.
Key Features
- Engineered for Revolvers: Purpose-built under Remington's Performance WheelGun line for smooth cylinder indexing and snag-free ejection.
- Clean-Punching Bullet Geometry: Sharp 158gr semi-wadcutter shoulder cuts crisp, round holes in paper for effortless scoring.
- Kleanbore Ignition: Features Remington Kleanbore primers to drastically cut down on internal action fouling and barrel corrosion.
- Reloadable Factory Brass: Premium drawn-brass cases offer uniform wall thickness for long reloading lifecycle.
- Consistent Target Velocity: Loaded for mild recoil and predictable flight characteristics in both vintage and modern handguns.
Product Specifications
- Brand: Remington Ammunition
- Product Line: Performance WheelGun
- MPN: 22271
- UPC: 047700490304
- Caliber / Gauge: .38 Special (.38 SPL)
- Bullet Weight: 158 Grain
- Bullet Type: Lead Semi-Wadcutter (LSWC)
- Muzzle Velocity: ~850 FPS
- Muzzle Energy: ~253 ft-lbs
- Casing Material: Brass (Reloadable)
- Primer Type: Boxer (Kleanbore Non-Corrosive)
- Box Quantity: 50 Rounds per Box
- Case Quantity: 500 Rounds (10 Boxes)
