Reptilia AGS Series 34mm Scope Mount 1.34" Height 20 MOA Black - 100-437

*CONTACT US FOR A SPECIAL COUPON CODE*

Reptilia AGS Mount 34mm 1 34 Centerline Height 20 MOA Elevation Black 100 437 UPC 850072704548

Product Description

The Reptilia® AGS™ 34mm 1.34" 20 MOA Scope Mount in Black (SKU: 100-437 / UPC: 850072704548) is an uncompromising, purpose-built mounting solution developed specifically to meet the rigorous demands of competitive PRS/NRL shooters, long-range hunters, and tactical precision marksmen. Featuring a lowered 1.34-inch optical centerline over the M1913 Picatinny rail, the AGS solves the chin-weld compromise common to AR-height mounts on bolt guns, bringing the optic bore-axis closer to the barrel while maximizing ergonomic comfort and consistent eye-box tracking.

Every AGS mount is precision CNC-machined in the United States from a single billet of ultra-high-tensile 7075-T6 aluminum alloy, offering elite yield strength and rigidity without carrying extraneous dead weight. The surface is treated to a uniform, non-reflective MIL-A-8625 Type III Class 2 hardcoat anodize that resists corrosive field chemicals, abrasive dust, and intense thermal extremes. Clamping authority is provided by dual spring-loaded 4140 chromoly steel clamps finished in a durable salt bath nitride QPQ process. The cross-bolts feature a streamlined, flush-fitting design that eliminates oversized thumb nuts, levers, or snag points that catch on shooting bags, dynamic barricades, and rifle slings.

Engineered with 20 MOA (5.82 MIL) of built-in downward inclination, the AGS preserves your optic's internal elevation travel, allowing long-range dial-ups well past 1,000 yards without bottoming out your scope turrets. The mount is fully compatible with Reptilia's modular ROF™ (Ring of Fire) ecosystem, allowing shooters to easily integrate top-mounted or offset secondary reflex red dot sights (such as Aimpoint® Micro or Trijicon® RMR footprints) directly over the front or rear rings. Backed by Reptilia's full lifetime warranty against manufacturing defects, the AGS sets a new benchmark for structural zero retention under heavy magnum recoil.

*Armorer Bench Notes & Real-World Staging Guidance:*

Fitment Matrix: Direct interface for all true M1913 Picatinny rails on precision bolt-action rifles, chassis platforms, and flat-top receivers running 34mm diameter scopes. CRITICAL: NOT compatible with 30mm or 35mm scope main tubes. Verify objective bell clearance over heavy contour barrels and continuous full-length handguards prior to torquing (1.34" centerline is lower than standard 1.54" AR mounts). Use a calibrated inch-pound torque wrench: torque clamp cross-bolts to 45 in-lbs against the rail; torque ring cap screws to 15-18 in-lbs in a criss-cross X pattern. Do NOT exceed scope manufacturer maximum tube torque ratings. Degrease all mating surfaces thoroughly prior to installation; do NOT use excessive liquid threadlocker on ring screws.

1. Ensure the host firearm is completely clear, magazine removed, bolt extracted, and chamber visually and physically verified empty.
2. Thoroughly clean and degrease the M1913 Picatinny rail slots, mount base, ring surfaces, and optic main tube using isopropyl alcohol.
3. Place the AGS mount onto the receiver rail, push the mount firmly forward into the Picatinny cross-slots to seat against the recoil lugs, and torque the cross-bolts to 45 in-lbs.
4. Set the 34mm optic into the lower cradles, adjust eye relief, mechanically level the reticle vertically using plumb lines or feeler gauges, and install ring caps.
5. Torque the T-25 Torx ring screws gradually in an alternating X pattern to 15-18 in-lbs (ensuring equal gap spacing on both sides), apply paint-pen witness marks, and verify zero retention at the range.

Key Features

• Precision Billet 7075-T6 Aluminum: Delivers superior strength-to-weight ratio and structural rigidity under the heaviest magnum recoil impulses.
• Integrated 20 MOA Downward Incline: Maximizes internal elevation adjustment for extreme long-range target engagement and ballistic drop compensation.
• Optimized 1.34" Optical Centerline: Provides an ideal natural cheek weld on bolt-action precision chassis without requiring excessive cheek riser elevation.
• Spring-Loaded Nitrided Steel Clamps: 4140 chromoly steel clamping system ensures repeatable return-to-zero clamping pressure across Picatinny rails.
• Anti-Snag Flush Hardware Architecture: Low-profile cross-bolts sit flush against the mount body, eliminating snag hazards on gear, slings, and barricade supports.
• ROF™ Modular Mounting Compatibility: Direct integration with Reptilia 34mm ROF top and 45-degree offset auxiliary red dot mounting systems.
• Type III Class 2 Hardcoat Anodizing: Deep protective black surface finish provides military-grade resistance against corrosion, scratching, and field solvents.
• 100% Made in the USA: Proudly designed, CNC-machined, and assembled domestically under rigorous quality control standards.

Product Specifications

• Brand: Reptilia®
• Model/Series: AGS™ (Action Gun Solution) Scope Mount
• MPN / SKU: 100-437 / 100437
• UPC: 850072704548
• Optic Tube Diameter: 34mm
• Optical Centerline Height: 1.34 Inches (34.0 mm)
• Elevation Incline (Cant): 20 MOA (~5.82 MIL)
• Material: Billet 7075-T6 Aluminum / 4140 Nitrided Steel Clamps
• Finish: MIL-A-8625 Type III Class 2 Hardcoat Anodized (Black)
• Mounting Interface: MIL-STD-1913 Picatinny Rail
• Fastener Drive: T-25 Torx
• Country of Origin: United States of America