Ruger® Factory Genuine OEM Value Pack – Fits LCP® MAX Models – .380 Auto (.380 ACP) – 10-Round Capacity – Blued Steel Construction – Twin Pack – 90735
The Ruger® Factory Genuine OEM 10-Round .380 Auto Value Twin-Pack Magazine Set (90735) represents a premier mechanical benchmark in ultra-compact concealed carry (CCW) feeding logistics, masterfully engineered in the USA to maximize downrange payload readiness for modern pocket pistols. Purpose-built directly by Sturm, Ruger & Co. to complement their groundbreaking LCP® MAX double-stack micro-compact frame, this turn-key feeding package shatters traditional capacity limitations. While legacy pocket pistols require users to rely on restrictive 6-round single-stack frames—which continuously run dry under high-velocity defensive strings—cheap aftermarket single magazines can introduce soft feed-lip flexing bugs and timing failures that induce nose-diving stovepipe jams when running under intense spring tension. Ruger completely overrides those vulnerabilities. This factory original twin set (736676907359) provides two identical, duty-vetted reservoirs, functioning as an indispensable primary asset for daily deep-concealment security, reactive tactical training loops, and immediate loadout staging loops.
The structural foundation of these high-efficiency micro reservoirs is precision-drawn from a monolithic sheet of premium carbon alloy structural steel. Treated to an advanced, deep-penetrating **Classic Blueing chemical anti-friction finish**, the tubes easily repel harsh carbon powder scouring, sliding friction corridors, and metal-on-metal wear. Moving away from flimsy, wide-lip multi-fit adapters that wiggle within the magazine well, the 90735 blueprint is dimensioned with strict original factory tolerances to interface natively with the LCP MAX magazine catch block. The interior mechanics integrate a **precision-molded, anti-tilt low-friction polymer follower backed smoothly by a high-tensile steel wire coil spring motor**, ensuring perfectly linear upward presentation tracking down to the final empty cartridge casing, whether feeding blunt-nose practice round ball ammo or high-expansion jacketed hollow points (JHP).
The true operational highlight of this American cutlery and firearms milestone lies in its dual-floorplate ergonomics and rapid visual status indexing. Each magazine arrives factory-equipped with a **low-profile, flush-fit polymer base pad pre-installed**, allowing your micro frame to vanish completely inside a pocket or inside-the-waistband (IWB) kydex holster with zero printing lines. Additionally, Ruger includes **two matching finger-extension pinky-rest floorplates** inside the package, letting the operator easily swap the bases away to secure a full three-finger master grip for added muzzle control and recoil dampening at the range. Detailed with clear, factory-drilled **numbered witness indicator holes running down the rear spine** for split-second visual round status updates, this 1.50-ounce per-unit asset delivers absolute mechanical authority, engineered exclusively to fuel your LCP MAX pocket defensive system. *(Note: Explicitly does not fit standard legacy LCP®, LCP® II, or LC380® platform frames).*
Includes: (2) Genuine Ruger Factory LCP MAX 10-Round .380 ACP Steel Magazines (Pre-Installed Flush-Fit Floorplates), (2) Interchangeable Textured Finger-Extension Bumper Base Pads, and Original Ruger Factory Value Pack Retail Presentation Cardboard Packaging.
*Micro-Compact CCW Spring Maintenance & Floorplate Guidance: The Ruger 90735 set utilizes highly compressed performance coil springs to pack a full 10-round payload inside a tiny footprint. When first deploying these magazines, seating the final 10th round may feel exceptionally tight; leaving the tubes fully staged with ammunition for 48 hours will condition the wire core perfectly for fluid tracking. To maintain total defensive readiness, keep the internal tracking lanes clean of abrasive clothing lint and pocket grime by routinely sliding off the base plate to dry-brush the spring column clean.
Key Features
- Genuine Ruger Factory OEM: Designed, precision-stamped, and verified directly by Ruger to ensure uncompromised cycling timing and flawless mechanical frame lockup.
- Double-Volume Value Pack: Provides two independent 10-round factory steel magazines inside a single package to maximize defensive readiness while reducing per-unit cost.
- Corrosion-Resistant Blued Steel: Classic heat-treated blued steel shell resists edge deformation while sliding into frame tracks with frictionless momentum.
- Flush & Extended Floorplates Included: Comes equipped with flush baseplates for deep pocket stealth, plus optional extended pinky pads for enhanced physical firearm control.
- Anti-Tilt Polymer Follower: Optimized geometry guides both hollow-points and round-nose range ammunition smoothly over the barrel feed ramp without nose-diving.
- Numbered Rear Witness Holes: Stamped capacity windows allow operators to visually audit their residual ammunition payload at a single glance during administrative sweeps.
Product Specifications
- Brand: Ruger® / Sturm, Ruger & Co., Inc. (Southport, Connecticut, USA)
- Product Line: Genuine Factory OEM Firearms Accessory Matrix
- Model Series Designation: LCP® MAX 10-Round .380 Auto Magazine Value 2-Pack
- SKU / MPN: 90735 (Alternative Part Identifiers: RUG90735 / 90735-RUG / RUG-90735)
- Firearm Platform Interface: Ruger® LCP® MAX Micro-Compact Handguns Only
- Platform Fitment Exclusions: Does NOT fit Original LCP®, LCP® II, LCP® II 22LR, or LC380® Models
- Caliber Class Chambering: .380 Auto / .380 ACP (Automatic Colt Pistol) / 9x17mm Short
- Maximum Magazine Capacity: 10 Rounds Per Individual Unit (20 Rounds Total Combo Payload)
- Tube Material Composition: Precision-Stamped Heat-Treated Carbon Alloy Steel
- Surface Finish Class: Classic Low-Friction Polished Blued Steel Treatment
- Follower Component Profile: High-Visibility Impact-Resistant Anti-Tilt Polymer Follower
- Internal Spring Architecture: High-Endurance Tempered Steel Wire Coil Spring
- Baseplate Profiles: (2) Flush-Fit Mounted Pads & (2) Loose Extended Finger-Rest Replacements
- Visual Status Indication: Rear-Spine Numbered Mechanical Round Index Witness Holes
- Product Net Component Weight: ~1.50 oz (42.5 g) Per Individual Magazine - Ultra-Light Frame
- Total Shipping Pack Mass: ~0.40 lbs (Enclosed Inside Sealed Factory Retail Presentation Packaging)
- UPC Barcode: 736676907359
