Samson Manufacturing

Samson Manufacturing SIG MPX 8.0" Narrow Profile M-LOK Handguard Black - 01-04031-01

MSRP: $150.00
$119.00
( saved $31.00 )
No reviews yet Write a Review
Adding to cart… The item has been added
SKU:
01-04031-01
UPC:
850006871124
  • $7.95 Flat Rate Shipping

  • Easy Returns

  • Safe Payments

  • The Best Products

Samson Manufacturing SIG Sauer MPX 8 Inch Narrow Profile M LOK Handguard Black 01 04031 01 UPC 850006871124

Product Description

The Samson Manufacturing® SIG Sauer® MPX® 8.0" Narrow-Profile M-LOK® Handguard (SKU: 01-04031-01 / UPC: 850006871124) is a purpose-built forend upgrade engineered for SIG MPX pistols, SBRs, and pistol-caliber carbines. Designed to replace wide, bulky factory KeyMod™ rails, this 8.0-inch free-float chassis transforms front-end balance and allows a natural, high-control C-clamp or thumb-over-bore grip for rapid target transitions in tactical and USPSA PCC competition environments.

Precision CNC-machined in New Hampshire from solid 6061-T6 aircraft-grade aluminum, the Samson MPX handguard weighs a mere 6.35 ounces while maintaining rigid zero retention for front iron sights and weapon-mounted aiming devices. Its MIL-STD black hardcoat anodized finish provides a durable, non-reflective surface that resists carbon buildup, gun solvents, and hard barricade impacts, while oversized side lightening ports promote rapid airflow around the short-stroke gas piston assembly.

Featuring a continuous, uninterrupted 12 o'clock MIL-STD-1913 Picatinny top rail that mates seamlessly with the MPX upper receiver, the handguard offers full M-LOK® modularity along the 3, 6, and 9 o'clock flats. Included OEM-spec mounting hardware locks the rail firmly onto the receiver bridge without play or rotational shift under sustained rapid fire.

*Armorer Bench Notes & Real-World Staging Guidance:*

Fitment Matrix: Fits SIG Sauer® MPX® Gen 1, Gen 2, and Gen 3 upper receivers (9mm Luger). CRITICAL CLEARANCE WARNING: The slim 1.30" inner diameter (ID) will NOT fit standard 1.375" to 1.62" outer-diameter 9mm suppressors tucked inside the rail. Verify barrel length (8.0" barrel recommended for flush muzzle device clearance) or suppressor OD before installation. Not compatible with SIG MCX or standard AR-15/AR-9 receivers. Torque receiver mounting fasteners to 25–30 in-lbs using a drop of blue Loctite® 242 and verify M-LOK® T-nut screws do not contact the barrel or gas block.

  1. Ensure the host SIG MPX is completely clear, magazine removed, bolt locked back, and chamber visually and physically verified empty.
  2. Push out the front takedown pivot pin from left to right until it stops against its detent, then slide the factory handguard straight forward off the receiver rails.
  3. Inspect the gas piston assembly and receiver trunnion channels for carbon debris, then align the Samson 8.0" handguard onto the upper receiver dovetail guides.
  4. Slide the handguard fully rearward until flush against the upper receiver face, engage the front takedown pivot pin completely, and torque the included mounting hardware to 25–30 in-lbs.
  5. Verify continuous top-rail alignment, check that M-LOK® accessory screws clear the barrel profile, and perform a full bolt-cycle and dry-fire function check before live-fire staging.

Key Features

  • Ultra-Slim 1.30" Inner Diameter Profile: Eliminates the oversized girth of factory KeyMod™ handguards for superior thumb-over-bore ergonomics and faster target transitions.
  • 6061-T6 CNC-Machined Construction: Precision-milled from domestic aluminum billet and finished in MIL-STD black anodizing for rugged durability at just 6.35 oz.
  • Continuous Top Picatinny & M-LOK® Slots: Full-length 12 o'clock 1913 rail paired with 3, 6, and 9 o'clock M-LOK® slots for lights, hand stops, and QD sling mounts.
  • High-Airflow Piston Ventilation: Large machined side ports reduce front-end mass and accelerate heat dissipation during high-round-count strings.
  • Drop-In Receiver Fitment: Interfaces directly with the factory MPX front pivot pin and includes dedicated mounting hardware for rock-solid zero retention.

Product Specifications

  • Brand: Samson Manufacturing®
  • Model/Series: MPX® Narrow-Profile M-LOK® Handguard
  • MPN / SKU: 01-04031-01 / 010403101
  • UPC: 850006871124
  • Length: 8.0 Inches
  • Inner Diameter (ID): 1.30 Inches
  • Material & Finish: 6061-T6 Aluminum / MIL-STD Black Hardcoat Anodized
  • Mounting Interface: MIL-STD-1913 Top Rail & M-LOK® (3, 6, 9 O'Clock)
  • Platform Compatibility: SIG Sauer® MPX® Pistols, SBRs & Carbines (Gen 1 / Gen 2 / Gen 3)
  • Country of Origin: United States (Keene, NH)