Smith and Wesson Model 41 422 622 2206 10 Round 22 LR Magazine Blued 190500000 UPC 022188490503
Product Description
The genuine factory OEM Smith & Wesson® Model 41 / 422 / 622 / 2206 10-Round .22 LR Magazine (SKU: 190500000 / UPC: 022188490503) provides match-grade cartridge feeding and flawless mechanical cycling for Smith & Wesson's heritage rimfire handgun platforms. Precision-built to authentic S&W blueprint specifications, this magazine guarantees factory-correct feed-ramp geometry, positive magwell retention, and consistent last-round slide-lock actuation across both bullseye competition and precision range drills.
Formed from premium heat-treated stamped carbon steel sheet, the magazine body receives a traditional deep blued finish that optimizes lubricity, inhibits carbon fouling adhesion, and guards against surface corrosion in demanding range environments. Its factory-formed steel feed lips maintain rigorous dimensional tolerances across high-volume firing regimens, safeguarding fragile lead bullet profiles and eliminating bullet deformation, rim-lock, or nose-dive failures.
Internally, a heavy-duty wound music-wire spring applies balanced vertical pressure against a low-friction anti-tilt polymer follower for smooth, uninterrupted cartridge delivery. A knurled lateral follower-assist pin traverses a full-length side witness track, allowing shooters to relieve spring tension for rapid thumb-assisted loading while offering instant visual capacity verification. A flush-fitting stamped steel floorplate completes the assembly for factory-correct grip frame integration.
*Armorer Bench Notes & Real-World Staging Guidance:*
Fitment Matrix: Direct factory OEM flush fit for Smith & Wesson Model 41, Model 46, Model 422, Model 622, and Model 2206 pistols. Will physically lock and feed in compact Model 2213 and Model 2214 handguns, but will extend below the grip base due to their shorter 8-round subcompact frames. CRITICAL: Incompatible with SW22 Victory, M&P 22 Full Size, M&P 22 Compact, or Model 22A/22S pistols. Vintage pre-1970 Model 41 pistols may have tighter hand-fitted magwells; verify smooth drop-free release prior to live staging. Maintain magazine internals clean and dry; do not coat the inside of the tube with wet oils or grease that attract waxy rimfire bullet residue.
- Point the host firearm in a safe direction, visually and physically inspect the chamber and bore, and verify the safety is engaged.
- Depress the lateral knurled follower-assist button downward slightly with your support thumb just enough to slide the first .22 LR cartridge rearward under the steel feed lips.
- Continue loading one cartridge at a time, ensuring each cartridge rim rests cleanly in front of the preceding rim beneath it to eliminate rim-lock jams.
- Insert the loaded magazine firmly into the pistol grip frame until the magazine release latch engages with an audible, tactile click.
- Perform a push-pull seating check, cycle the slide manually to verify flawless chamber presentation, and inspect slide-lock lever engagement upon emptying during staging.
Key Features
- Factory S&W OEM Engineering: True factory tolerances guarantee proper mag catch lockup, feed-angle alignment, and reliable slide-hold-open operation.
- Heat-Treated Carbon Steel Construction: Stamped steel body provides rugged structural defense against body spreading and impact deformation.
- Corrosion-Resistant Blued Finish: Traditional blued exterior offers smooth insertion lubricity and long-term protection against environmental moisture.
- Thumb-Assist Follower Pin: Lateral loading slider relieves internal spring tension for effortless loading of all 10 rounds.
- Anti-Tilt Polymer Follower: Stabilizes rimfire cartridges to promote smooth presentation and prevent nose-diving malfunctions.
- Full-Length Witness Track: Provides fast, at-a-glance ammunition status checks on the firing line.
Product Specifications
- Brand: Smith & Wesson®
- Model/Series: Model 41 / 422 / 622 / 2206 Factory Replacement Magazine
- MPN / SKU: 190500000 / 190500000
- UPC: 022188490503
- Caliber: .22 Long Rifle (.22 LR)
- Capacity: 10 Rounds
- Body Material: Stamped Carbon Steel
- Finish: Blued
- Follower: Low-Friction Anti-Tilt Polymer with Integrated Assist Pin
- Baseplate: Flush-Fit Stamped Carbon Steel
- Platform Compatibility: S&W Model 41, 46, 422, 622, 2206 (Functions extended in 2213 & 2214)
- Country of Origin: United States
