Spartan Precision Equipment Valhalla Gen 2 Bipod Tac Legs SP01 056 R SP01056R UPC 616985236398
Product Description
The Spartan Precision Equipment® Valhalla Gen 2 Bipod (SKU: SP01-056-R / UPC: 616985236398) represents the pinnacle of lightweight, extreme-stability support systems designed specifically for tactical precision competitors and elite backcountry marksmen. By locating the horizontal spigot fulcrum point forward beneath or adjacent to the barrel channel, the Valhalla cradles the rifle chassis close to the bore centerline. This wide, underslung geometry dramatically lowers the center of gravity, mitigating muzzle torque and dynamic jump under heavy recoil to keep your reticle on target through the shot break.
The bipod chassis is precision CNC-machined from solid billet 7075-T7351 aerospace aluminum and finished with a resilient MIL-A-8625 Type III Class 2 hardcoat anodize for extreme resistance to abrasion, salt spray, and field solvents. Load-bearing pivot shoulders are reinforced with hardened stainless steel locking plates to handle aggressive positional loading without mechanical deformation. Supporting the chassis are two-piece multi-layer carbon fiber Tac legs that deliver an extraordinary strength-to-weight ratio while remaining completely inert across radical thermal shifts. At the ground interface, machined tungsten carbide spiked tips provide biting purchase on hard rock, concrete, and timber, while captive synthetic rubber boots dampen vibration and grip slick surfaces.
Engineered for rapid real-world deployment, the Valhalla Gen 2 features five indexed leg pitch settings (0°, 45°, 90°, 135°, and 180°) and spring-assisted telescoping height adjustment operable with a single hand from the prone position. An ergonomic, re-indexable cant friction lever allows shooters to level their reticle up to 10 degrees left or right on steep side-hills, backed by an optional cant limit screw that can be removed for complete articulation. Modular M14x1.5 threaded sockets allow full leg interchangeability with the Spartan Pro Leg ecosystem, ensuring your platform seamlessly adapts from low-profile competition barricades to elevated field positions.
*Armorer Bench Notes & Real-World Staging Guidance:*
Fitment Matrix: Direct spigot mount onto precision chassis and tactical stocks equipped with a Spartan Valhalla Gen 2 M-LOK or Picatinny spigot adapter. Caliber-rated from standard short actions up to .300 Win Mag, .300 RUM, and .338 Lapua Magnum. CRITICAL: This unit does NOT utilize the Spartan MagnaSwitch 12mm magnetic system. Do NOT mount on legacy Valhalla Gen 1 aluminum spigots; while Gen 1 spigots fit into the collar, they are longer and protrude, preventing full flush mechanical lockup. Fastener torque for rifle-mounted M-LOK spigot T-nuts must be maintained at 30 to 35 in-lbs (Picatinny clamp cross-bolts at 20 to 25 in-lbs) with medium-strength threadlocker.
- Ensure the host rifle is completely cleared, magazine removed, bolt locked rearward, and the chamber physically and visually confirmed empty before bench staging.
- Verify that the host rifle's forend is securely fitted with a genuine Valhalla Gen 2 hardened stainless steel spigot adapter (M-LOK or Picatinny) torqued to manufacturer specifications.
- Depress the spring-loaded forward release catch on the front of the Valhalla Gen 2 bipod chassis and slide the receiver sleeve fully over the horizontal rifle spigot until the detent positively engages with an audible click.
- Adjust the knurled cant locking lever clockwise to set the desired rotational friction; if necessary, pull the lever outward on its spline to re-index its resting position away from accessories or slings.
- Deploy the legs from the stowed 0° forward position to the 90° vertical or 45° forward cant detent, depress the spring-assisted collar levers to stage ground height, and perform a stability check prior to live-fire confirmation.
Key Features
- Forward Horizontal Spigot Architecture: Moves the pivot fulcrum toward the muzzle, cradling the bore axis to reduce recoil hop and increase shot-to-shot tracking.
- Billet 7075-T7351 Aluminum Construction: Mil-Spec Type III hardcoat anodized chassis delivers match-grade structural rigidity while remaining ultralight at 13.0 oz.
- Hardened Stainless Steel Shoulder Plates: Reinforces primary load-bearing lockup points, eliminating play and resisting heavy tactical recoil impulses up to .338 Lapua.
- Multi-Layer Carbon Fiber Tac Legs: Telescoping, spring-assisted height adjustment from 4.75" to 8.25" with fast one-handed deployment.
- Five-Position Leg Pitch Selectivity: Positive mechanical locks at 0°, 45°, 90°, 135°, and 180° accommodate low prone, barricade leaning, and compact rifle storage.
- Tungsten Carbide Spikes with Rubber Boots: Machined carbide points bite into frozen dirt and rock, paired with captive synthetic rubber boots for slick bench surfaces.
- Friction Cant Mechanism: Smooth leveling lever provides ±10° of cant adjustment with the limit screw installed, or unrestricted movement when removed.
Product Specifications
- Brand: Spartan Precision Equipment®
- Model/Series: Valhalla Gen 2 Bipod (Tac Legs)
- MPN / SKU: SP01-056-R / SP01056R
- UPC: 616985236398
- Chassis Material: CNC-Machined 7075-T7351 Billet Aluminum
- Chassis Finish: MIL-A-8625 Type III Class 2 Hardcoat Anodized (Matte Black)
- Leg Construction: Multi-Layer Carbon Fiber with Stainless Steel Hardware
- Feet Material: Tungsten Carbide Spiked Tips with Tethered Synthetic Boots
- Ground Clearance: 4.75" to 8.25" (12.5 cm to 21.8 cm at 45° to 90° leg pitch)
- Stance Footprint Spread: 9.0" to 10.5" (23.0 cm to 27.0 cm)
- Leg Pitch Positions: 5 Positions (0°, 45°, 90°, 135°, 180°)
- Cant Range: ±10° (With Limit Screw Installed) / Full Unrestricted Cant (Screw Removed)
- Modular Leg Socket Thread: M14x1.5 (Compatible with Spartan Pro Leg Series)
- Caliber Rating: Up to .338 Lapua Magnum
- Platform Compatibility: Rifles equipped with Spartan Valhalla Gen 2 M-LOK or Picatinny Spigot Adapters
- Country of Origin: United Kingdom
