** PLEASE USE CODE SPYDERCO40 WITH THIS ITEM **
Spyderco Chaparral Red FatCarbon 2 88 Inch CTS XHP Satin Blade Red Carbon Fiber Handle C152CFRDP UPC 716104003006
Product Description
The Spyderco® Chaparral® Red FatCarbon® (SKU: C152CFRDP / UPC: 716104003006) represents the pinnacle of gentleman's everyday carry (EDC) refinement within Spyderco's acclaimed Chaparral series. Built around a compact, ultra-slim profile and an ambidextrous Back Lock architecture, this folder pairs the signature Trademark Round Hole™ with precision Taichung craftsmanship to deliver effortless one-handed deployment, bank-vault lockup, and zero-bulk pocket carry.
At the heart of the Chaparral is a 2.88-inch leaf-shaped blade ground full-flat from Carpenter CTS-XHP powder metallurgy stainless steel. Combining the corrosion resistance of 440C with the wear resistance and edge-holding tenacity of D2 tool steel, CTS-XHP takes a razor-keen edge and holds it through demanding daily slicing tasks. Its thin 0.079-inch (2.0 mm) blade stock minimizes cutting drag, while a finely brushed satin finish reduces surface friction and resists micro-scratches, complemented by a textured 50/50 index-finger choil and thumb ramp jimping for locked-in detail work.
The handle showcases eye-catching Red Dark Matter FatCarbon® scales—a high-density forged carbon fiber composite infused with rich crimson resin patterns—mounted over full skeletonized stainless steel liners for exceptional torsional rigidity at an ultralight 2.50-ounce weight. A reversible, low-profile deep-carry wire pocket clip allows discreet tip-up carry on either side, making the C152CFRDP equally suited for tailored office attire or rugged daily utility.
*Bladesmith Bench Notes & Field Maintenance Guidance:*
Deployment, Carry & Metallurgy Advisory: Manual Trademark Round Hole™ deployment with a center-mounted Back Lock (Lockback) and phosphor bronze pivot washers; crafted from Carpenter CTS-XHP stainless steel with a reversible tip-up wire pocket clip. While CTS-XHP is a high-chromium stainless alloy, wipe the blade dry after exposure to acidic foods or moisture and maintain a 17° to 20° per side sharpening angle on ceramic or diamond stones to preserve its thin 0.079" full-flat geometry.
- Verify the blade sweep path and work area are clear of obstructions, keeping fingers clear of the handle well when disengaging the spine-mounted lockbar.
- Inspect the pivot tension and lockbar engagement upon unboxing, wiping away any excess factory preservative oil from the blade tang and lock notch.
- To reverse the deep-carry wire pocket clip for left- or right-hand tip-up carry, use a precision T8 Torx driver and apply a single drop of removable blue threadlocker to the barrel bolt threads before torquing snug.
- Apply one drop of light synthetic knife oil to the phosphor bronze pivot washers and lockbar contact face every few months to prevent lint buildup and maintain hydraulic lockback action.
- Confirm crisp lockbar snap into the blade tang, verify centered blade alignment when closed, and stage securely in the pocket via the deep-carry clip.
Key Features
- Carpenter CTS-XHP Full-Flat Blade: 2.88" satin-finished leaf-shaped blade with ultra-thin 0.079" stock delivers laser-like slicing geometry, superior edge retention, and dependable stainless corrosion resistance.
- Red FatCarbon® Handle Scales: Contoured Red Dark Matter forged carbon fiber composite scales over skeletonized stainless steel liners provide dramatic visual depth, lightweight strength, and a slim 0.34" handle profile.
- Ambidextrous Back Lock & Trademark Round Hole™: High-strength spine-mounted lockback mechanism pairs with Spyderco's Trademark Round Hole™ and phosphor bronze washers for smooth, reliable two-handed or one-handed operation.
- Reversible Deep-Carry Wire Clip & Precision Choil: Low-profile wire pocket clip supports discreet left- or right-hand tip-up carry, while the textured 50/50 index choil and spine jimping maximize control during precision cuts.
Product Specifications
- Brand: Spyderco®
- Model/Series: Chaparral® Red FatCarbon®
- MPN / SKU: C152CFRDP / SC152CFRDP
- UPC: 716104003006
- Blade Length: 2.88" (73 mm)
- Blade Thickness: 0.079" (2.0 mm)
- Overall Length (OAL): 6.42" (163 mm)
- Closed / Handle Length: 3.63" (92 mm)
- Blade Steel: Carpenter CTS-XHP Stainless Steel
- Blade Style / Grind: Leaf-Shaped / Full-Flat Grind
- Blade Finish / Color: Satin / Silver
- Edge Type: PlainEdge
- Handle Material / Color: Red FatCarbon® Carbon Fiber / Red & Black
- Locking / Action Mechanism: Back Lock (Lockback) / Manual Trademark Round Hole™
- Pocket Clip / Sheath: Reversible Tip-Up Deep-Carry Wire Clip (Left/Right)
- Weight: 2.50 oz (71 g)
- Country of Origin: Taiwan (Taichung)