*CONTACT US FOR A SPECIAL COUPON CODE*
Spyderco UK Penknife Salt 2.95 Inch CPM MagnaCut Black DLC Blade Black G10 Handle C94GMCBKP UPC 716104018918
Product Description
The Spyderco® UK Penknife™ Salt® (SKU: C94GMCBKP / UPC: 716104018918) merges the jurisdiction-friendly, non-locking SLIPIT™ architecture with extreme marine-grade corrosion resistance. Built in Golden, Colorado, this flagship slipjoint folder features Spyderco's Trademark Round Hole™ for effortless one-handed ambidextrous deployment and a notched-joint backspring that holds the blade securely open during controlled cutting tasks without relying on a mechanical lock.
Forged from Crucible® CPM® MagnaCut® powder-metallurgy stainless steel, the 2.95-inch leaf-shaped drop-point blade eliminates chromium carbides from its microstructure to deliver extraordinary edge retention, high impact toughness, and virtually unmatched resistance to saltwater, sweat, and humidity. Its 0.098-inch stock is ground with a full-flat profile for low-drag slicing geometry and finished in a matte black Diamond-Like Carbon (DLC) coating to eliminate glare and further shield the steel in harsh maritime and tactical environments.
To keep carry weight down to a featherlight 2.2 ounces while maximizing wet-hand traction, Spyderco outfits the linerless handle with black G-10 scales featuring a peel-ply surface overlaid with the aggressive Caribbean Bi-Directional Texture™ pattern. A sculpted 50/50 index-finger choil and thumb ramp lock your grip into place and act as a physical safety buffer against accidental closure, while a reversible, black-coated deep-pocket wire clip enables discreet tip-up carry on either side.
*Bladesmith Bench Notes & Field Maintenance Guidance:*
Deployment, Carry & Metallurgy Advisory: Non-locking SLIPIT™ notched-joint slipjoint folder with Trademark Round Hole™ deployment, CPM® MagnaCut® stainless steel, and reversible tip-up wire pocket clip. Although CPM MagnaCut offers superior corrosion immunity, rinse the pivot and backspring channel with fresh water after saltwater exposure and apply a light synthetic lubricant to prevent mineral buildup. Sharpen at 17–20 degrees per side on diamond or ceramic stones, use quality T6/T8 Torx drivers when servicing hardware, and remember that non-locking blades can fold if downward pressure is applied to the spine.
- Verify the blade path and work area are completely clear of obstructions, keeping fingers clear of the blade track and backspring channel during initial inspection.
- Cycle the Trademark Round Hole™ smoothly through its half-stop and full-open detents to verify crisp backspring tension and clean factory pivot action.
- If switching carry sides, remove the wire clip screw using a precision Torx driver, seat the clip into the opposite scale slot, and secure with a drop of removable blue threadlocker without over-torquing.
- Apply one drop of light synthetic pivot oil to the tang-and-spring interface and wipe the black DLC blade clean with a microfiber cloth after use.
- Confirm centered blade alignment in the closed position, verify proper index-finger choil placement before cutting, and stage for discreet tip-up carry.
Key Features
- CPM® MagnaCut® Steel & Black DLC Finish: 2.95-inch full-flat-ground leaf-shaped blade delivers elite edge retention, toughness, and saltwater corrosion immunity with a non-reflective black DLC coating.
- Caribbean Bi-Directional Textured Black G-10: Linerless black G-10 scales combine peel-ply texture with multi-directional machined grooves for positive grip security in wet or gloved hands.
- Non-Locking SLIPIT™ Mechanism: Notched-joint backspring and ergonomic 50/50 finger choil provide dependable blade control and one-handed Round Hole™ opening without a mechanical lock.
- Reversible Deep-Pocket Wire Clip: Black-coated stainless wire clip supports low-profile, ambidextrous tip-up pocket carry with matching black-coated Salt®-series hardware.
Product Specifications
- Brand: Spyderco®
- Model/Series: UK Penknife™ Salt®
- MPN / SKU: C94GMCBKP / SPYC94GMCBKP
- UPC: 716104018918
- Blade Length: 2.95" (75 mm)
- Blade Thickness: 0.098" (2.5 mm)
- Overall Length (OAL): 6.89" (175 mm)
- Closed / Handle Length: 3.95" (100 mm)
- Blade Steel: Crucible® CPM® MagnaCut® Stainless Steel
- Blade Style / Grind: Leaf-Shaped Drop Point / Full-Flat Grind
- Blade Finish / Color: Black Diamond-Like Carbon (DLC)
- Edge Type: PlainEdge™
- Handle Material / Color: Caribbean Bi-Directional Textured G-10 / Black
- Locking / Action Mechanism: Non-Locking SLIPIT™ Slipjoint / Trademark Round Hole™ Manual
- Pocket Clip / Sheath: Reversible Deep-Carry Wire Clip (Tip-Up, Left/Right)
- Weight: 2.20 oz (63.0 g)
- Country of Origin: USA