Sun and Shadow SBA3 Cheek Riser 0 75 Inch Height Tiger Stripe SS SBA3 CR 075 TS SSSBA3CR075TS p684578927 UPC 850068457892
Product Description
The Sun and Shadow® SBA3 Cheek Riser 0.75" Height with Tiger Stripe Stock Skin (SKU: SS-SBA3-CR-075-TS / UPC: 850068457892) transforms the minimalist geometry of the SB Tactical SBA3 pistol stabilizing brace into an ergonomic, heads-up shooting platform. Purpose-built for modern tactical shooters running elevated optic mounts (1.93", 2.05", and 2.26" Unity FAST setups) or passive night vision aiming systems, this modular riser eliminates awkward chin welds, establishing an instantaneous, repeatable eye-box alignment the moment the weapon is presented.
Precision-manufactured in the USA from impact-modified structural PA12 Nylon polymer, the riser chassis easily withstands dynamic field abuse, extreme sub-zero temperatures, and direct contact with firearm lubricants and bore solvents without cracking. The comb face is wrapped with a durable Tiger Stripe Stock Skin textile, delivering a soft, non-slip cheek interface that dampens thermal conduction in blazing sun or freezing cold while mitigating facial sweat slippage. Engineered into the core of the 0.75" riser is a patent-pending, weather-resistant storage compartment sized perfectly to stow a spare AAA battery, keeping essential optic or illumination reserves on-board at all times.
Installation requires zero permanent modifications to your brace chassis. Utilizing an ultra-strong industrial hook-and-loop fastening foundation, the riser locks securely to the SBA3 upper strut while allowing easy longitudinal adjustment along the buffer tube axis to fine-tune your specific eye relief. Whether building an ultra-compact CQB pistol build, personal defense weapon (PDW), or high-cadence carbine, the Sun and Shadow SBA3 Riser bridges the critical ergonomic divide between compact brace form-factors and precision rifle shootability.
*Armorer Bench Notes & Real-World Staging Guidance:*
Fitment Matrix: Direct fit for SB Tactical SBA3 Pistol Stabilizing Braces and compatible minimalist stocks (such as the MFT Battlelink Minimalist). CRITICAL: Always verify charging handle clearance before final placement. On standard AR-15 platforms, a 0.75-inch riser will interfere with full charging handle travel if the SBA3 is collapsed to positions 1 or 2 on the receiver extension; the brace must be staged in positions 3, 4, or 5 to allow full cycling. Thoroughly degrease the brace comb with isopropyl alcohol prior to adhering the loop strip to ensure maximum adhesive cure strength. All NFA rules and pistol brace regulations apply.
- Ensure the host firearm is completely clear, magazine removed, and the chamber visually and physically confirmed empty.
- Clean and degrease the top strut surface of the SB Tactical SBA3 brace using isopropyl alcohol and a lint-free shop wipe to remove all mold release agents and oils.
- Peel the protective backing from the included heavy-duty industrial loop strip, align it evenly along the top ridge of the SBA3, and apply firm, continuous pressure for 60 seconds.
- Seat the Sun and Shadow 0.75" Cheek Riser firmly onto the loop field, adjusting its longitudinal position to suit your natural cheek weld and eye relief.
- Extend the SBA3 brace to your designated operating notch (positions 3–5), manually cycle the charging handle completely rearward to verify 100% mechanical clearance, and stage for operational use.
Key Features
- 0.75" Heads-Up Elevation: Optimizes cheek weld for modern high-rise optic mounts (1.93" to 2.26" Unity FAST) and night vision passive aiming.
- Integrated Battery Storage: Features a patent-pending internal weather-resistant storage pocket specifically sized for one (1) emergency AAA battery.
- Tiger Stripe Stock Skin: Durable textile comb wrap provides traction, reduces sweat slippage, and eliminates cold/hot transfer to the shooter's face.
- High-Strength PA12 Nylon: 3D-printed composite architecture withstands drops, solvent exposure, and heavy tactical recoil without deformation.
- Modular Industrial Hook-and-Loop: Fastens securely with heavy-shear industrial Velcro, allowing simple repositioning and zero permanent alteration of the brace.
- Made in the USA: Designed and manufactured domestically to exacting dimensional tolerances.
Product Specifications
- Brand: Sun and Shadow Tactical Products, LLC®
- Model/Series: SBA3 Cheek Riser (0.75" Height)
- MPN / SKU: SS-SBA3-CR-075-TS / p684578927
- UPC: 850068457892
- Height Rise: 0.75 Inches (19.05 mm)
- Comb Finish: Tiger Stripe Stock Skin Fabric
- Chassis Material: 3D-Printed Structural PA12 Nylon Polymer
- Internal Storage Capacity: (1) AAA Battery (Weather-Resistant)
- Mounting Interface: Heavy-Duty Industrial Adhesive Hook-and-Loop
- Length: 3.90 Inches (9.91 cm)
- Width: 1.80 Inches (4.57 cm)
- Platform Compatibility: SB Tactical SBA3 Pistol Stabilizing Brace (and MFT Minimalist Stocks)
- Country of Origin: United States
