TPS Arms Enhanced AR-15 Trigger Group 5.5 lbs. Pull Weight - AR2005
Product Description
Standard factory mil-spec fire control groups provide a reliable baseline of safety for modern sporting rifles, but their mass-production tolerances introduce an immediate mechanical bottleneck. Stock triggers frequently exhibit a gritty, uneven take-up, heavy stacking friction, and excessive pre-travel creep that compromises clean finger control and leads to subtle muzzle deviation at the exact point of ignition. This unpredictability limits a shooter's downrange accuracy potential, especially during intensive training or general-purpose duty applications. The TPS Arms Enhanced Trigger Group (ETG) completely redefines standard single-stage fire control assemblies, eliminating inherent mil-spec grittiness while maintaining the unyielding drop-safety and reliability required by frontline service platforms.
Precision-manufactured in the United States from premium high-tensile steel alloys, this complete 7-piece conversion engine is engineered to deliver a remarkably consistent, crisp trigger break. The kit incorporates a meticulously contoured trigger bow, a hardened hammer, a fine-blanked disconnector, high-grade duty springs, and centerless-ground hammer/trigger pins to guarantee optimal internal tracking alignment. Every component features a uniform protective black finish that resists environmental moisture, abrasive carbon grime, and aggressive cleaning solvents. By tuning internal engagement geometries, TPS Arms successfully removes performance-inhibiting grit while strictly adhering to the M4/M16 minimum pull weight specification of 5.5 pounds, ensuring full compliance with official duty and safety standards.
In tactical or recreational workshop applications, the ETG functions as a highly practical, drop-in performance upgrade that immediately transforms your rifle's manual of arms. By sharpening the trigger response and smoothing the travel arc, this fire control group provides the shooter with superior tactical feedback, allowing for predictable shot placement and stable tracking across extended live-fire strings. Furthermore, the optimized reset geometry reduces sluggish forward cyclic lag, forcing the trigger shoe forward with snappy velocity to facilitate faster, more controlled follow-up shots. Backed by a limited lifetime warranty, this affordable upgrade bridges the gap between cost-prohibitive match triggers and loose commercial options.
*Armorer Bench Notes & Technical Maintenance Guidance: The TPS Arms Enhanced Trigger Group (AR2005) drops natively into standard small-pin (.154/.156 inch) AR-15 lower receivers and matching large-frame AR-10/SR-25 pattern platforms. During bench installation, ensure the small disconnector spring is oriented with its wider, flared base seated down inside the rear trigger cavity pocket before overlaying the disconnector itself. When positioning the hammer assembly into the receiver, verify that the two long legs of the hammer spring rest perfectly flat across the top outer grooves of the trigger pin, as this configuration acts as a mechanical anchor to prevent pin walk during high-volume strings. Apply a micro-dot of premium high-viscosity synthetic gun grease directly onto the primary hammer sear notch and the disconnector hook to achieve maximum slickness and a glass-like reset. Always perform a comprehensive safety and function check with the upper receiver detached or using a specialized hammer block, as allowing the hardened steel hammer to strike an empty aluminum lower receiver face can fracture the bolt-catch ears.
Key Features
- Smooth Mil-Spec Pull: Engineered to eliminate the gritty stacking and excessive creep typical of stock triggers while delivering a consistent, smooth 5.5-pound break.
- M4/M16 Weight Compliance: Calibrated to meet the minimum 5.5 lb military standard, ensuring complete safety compliance for duty, service, or defensive configurations.
- Complete 7-Piece System: Packages all necessary components—including the hammer, trigger, disconnector, custom-wound springs, and pins—for a comprehensive out-of-the-box overhaul.
- All-American Manufacturing: Proudly machined and tempered within the United States using high-grade structural alloys to ensure absolute operational endurance.
- Durable Protective Finish: Finished in a uniform black protective jacket that reduces internal surface friction while shrugging off corrosive carbon fouling and cleaning solvents.
Product Specifications
- Brand: TPS Arms (Tactical Parts Supply & Arms)
- Model Line: Enhanced Trigger Group (ETG) Performance Components
- MPN/SKU: AR2005
- UPC: 859629006234
- Platform Fitment: Standard AR-15 and AR-10 / SR-25 Small-Pin Lower Receivers
- Trigger Type Configuration: Single-Stage Mil-Spec Upgrade
- Trigger Bow Profile: Traditional Curved Bow
- Pull Weight Target: 5.5 lbs (Fixed Duty Spec)
- Pin Size Configuration: Standard Small Pin (.154" / .156" Diameter)
- Material Base: Precision-Machined High-Tensile Structural Steel
- Finish Treatment: Matte Black Protective Coating
- Warranty Support: Limited Lifetime Manufacturer Warranty
- Country of Manufacture: United States
