*CONTACT US FOR A SPECIAL COUPON CODE*
Tricer UL Ultralight Hunting Bipod Black Carbon Titanium UL BIP 3 UPC 850072969299
Product Description
The Tricer® UL Ultralight Hunting Bipod (SKU: UL-BIP-3 / UPC: 850072969299) establishes the zenith of backcountry weapon stabilization, shaving non-essential ounces from the rifle system without compromising torsional rigidity or shot-to-shot recoil consistency. Purpose-built for high-altitude western big game stalkers, mountain hunters, and backcountry precision riflemen, the Tricer UL disappears on the forend at a class-leading 4.8 ounces while delivering a full-featured, zero-slop shooting rest engineered to withstand violent magnum recoil impulses.
Constructed around a solid titanium head assembly and dual multi-layer woven carbon fiber leg shafts, the UL-BIP-3 leverages inverted leg geometry to isolate structural twist locks from mud, debris, and snow intrusion. The titanium core provides superior strength-to-weight performance over conventional 6061-T6 aluminum clamps, resisting galling, cross-threading, and cold-weather metal brittleness. The high-modulus carbon tubing damps barrel harmonics during discharge, while impervious resin binders prevent chemical degradation from gun cleaning solvents, CLP, and extreme thermal cycling.
Modularity and speed govern the deployment envelope of the Tricer UL. Featuring a rapid-engagement Picatinny cross-bolt interface, the bipod also ships complete with the precision Tricer-PA sling swivel stud adapter, making it universally adaptable to both modern tactical chassis and traditional Monte Carlo hunting stocks. Two-section inverted twist-lock legs transition rapidly from an 8.3-inch baseline to an 11.6-inch full extension across a wide 50-degree stance, while the micro-adjustable throw lever locks in weapon cant and tilt instantaneously on severely off-camber alpine hillsides.
*Armorer Bench Notes & Real-World Staging Guidance:*
Fitment Matrix: Direct mounting to standard MIL-STD-1913 Picatinny rails; compatible with traditional hunting rifle forends via the included Tricer-PA swivel stud adapter block. CRITICAL FITMENT WARNING: The Tricer UL clamp is NOT directly Arca-Swiss rail compatible without an aftermarket conversion block, and will NOT accept modular Tricer RP Arca Heads or Tricer RP series replacement rubber feet. Torque the Picatinny cross-bolt fastener to 30–35 in-lbs maximum; when installing the Tricer-PA sling stud adapter, snug firmly against the forend using a non-permanent low-strength threadlocker (Vibra-TITE VC-3 or blue Loctite 242) to prevent vibration-induced loosening under magnum recoil.
- Ensure the host firearm is completely clear, magazine removed, and chamber visually and physically verified empty.
- Inspect the rifle forend mounting interface: ensure the Picatinny rail section is degreased and clean, or install the included Tricer-PA swivel stud adapter over the host sling stud and tighten the retention plate evenly against the stock contour.
- Loosen the cross-bolt clamp on the Tricer UL bipod head, index the cross-pin securely into the desired recoil groove of the Picatinny rail, and press the bipod forward firmly against the rail lug to seat recoil resistance forward.
- Torque the bipod mounting cross-bolt to 30–35 in-lbs using an armorer's torque driver; adjust the cant/tilt locking lever to the shooter's desired running friction.
- Extend each 2-section inverted carbon leg, verify twist-lock collet engagement and positive stop lockup, and conduct a mechanical staging check to confirm zero mechanical clearance interference with the rifle barrel or sling attachments.
Key Features
- Titanium Core Architecture: Precision Grade 5 titanium head housing provides unmatched yield strength and fatigue life at a fraction of standard assembly mass.
- Inverted Multi-Layer Carbon Legs: Inverted leg design positions the collet locking collars higher on the leg assembly, preventing trail grit, mud, and frozen slush from fouling the twist locks.
- Sub-5-Ounce Net Footprint: Weighing an astonishing 4.8 ounces bare, this system provides true field stability without altering rifle center-of-balance or carrying fatigue.
- Throw-Lever Tilt & Cant Adjustment: Integrated side-locking tension lever allows instant leveled crosshair leveling across rugged, non-level alpine shooting positions.
- Included Swivel Stud Pic Adapter: Ships standard with the Tricer-PA adapter block, allowing seamless mounting across legacy sporter stocks and modern railed handguards out of the box.
- Wide 50-Degree Operating Stance: Wide-spread inverted geometry provides maximum lateral resistance against rifle torque during ignition of magnum cartridges.
Product Specifications
- Brand: Tricer®
- Model/Series: UL Ultralight Hunting Bipod
- MPN / SKU: UL-BIP-3 / 202185
- UPC: 850072969299
- Platform Compatibility: MIL-STD-1913 Picatinny Rails & Standard Rifle Sling Swivel Studs
- Material: Titanium Head Assembly & Hardware / High-Modulus Carbon Fiber Legs
- Height Range: 8.30 Inches (Retracted) to 11.60 Inches (Extended)
- Folded Length: 8.70 Inches
- Leg Sections & Lock: 2-Section Inverted Telescoping / Mechanical Twist-Lock Collars
- Leg Spread Angle: 50 Degrees
- Weight Capacity: 22.0 lbs Static Load
- Foot Style: Integrated Carbide Spiked Feet with Fitted Traction Pads
- Country of Origin: Designed in USA / Imported Components
