*CONTACT US FOR A SPECIAL COUPON CODE*
TriggerTech AR 15 Duty Single Stage Flat Trigger 3 5 lb PVD Black AH0 SDB 33 NNF UPC 885768003520
Product Description
The TriggerTech® AR-15 Duty Trigger (SKU: AH0-SDB-33-NNF / UPC: 885768003520) delivers a factory-calibrated, non-adjustable 3.5 lb single-stage break engineered specifically for military, law enforcement, and hard-use defensive carbines. Built around a straight flat trigger lever, this drop-in cassette system eliminates the gritty take-up of standard Mil-Spec fire control groups while maintaining the full-power hammer strike required to reliably ignite hard military-grade primers.
Constructed with a rigid EZAC die-cast alloy housing and hardened 440C stainless steel internal engagement surfaces, the Duty series resists wear, fouling, and environmental degradation in adverse field conditions. External stainless components are finished in a durable Physical Vapor Deposition (PVD) Black coating for low-friction operation and corrosion protection, while TriggerTech's proprietary Frictionless Release Technology™ utilizes a captured free-floating roller between the sear and trigger to achieve 0.000 inches of creep without sliding friction.
The straight flat trigger shoe provides repeatable index placement and enhanced mechanical leverage, allowing shooters to maintain consistent finger geometry during rapid strings of fire or precision engagements. Integrated TKR™ and FLTWR™ flat-wire spring architectures limit overtravel to 0.060 inches and deliver a crisp, authoritative 0.070-inch tactile mid-force reset for rapid follow-up shots.
*Armorer Bench Notes & Real-World Staging Guidance:*
Fitment Matrix: Mil-Spec AR-15 / M4 lower receivers with standard 0.154-inch pin bores. CRITICAL WARNING: Trigger pins are NOT included; reuse standard Mil-Spec 0.154" pins or install dedicated 0.154" anti-walk pins. Do NOT install in AR-10 / LR-308 receivers, direct-blowback AR-9 PCCs, monolithic polymer lowers (KE Arms KP-15), or legacy Colt 0.169" large-pin lowers. Do NOT lubricate the internal cassette mechanism; run dry.
- Ensure the host AR-15 is completely clear, magazine removed, bolt carrier group locked back, and chamber visually and physically verified empty before separating the upper and lower receivers.
- Place the safety selector in the SAFE position (or remove the selector if required by your receiver geometry) and drive out the existing hammer and trigger pins using a 5/32" brass or steel roll pin punch.
- Clean any carbon fouling or excess grease from the lower receiver fire control pocket, then drop the TriggerTech Duty cassette housing straight down into the receiver pocket until the pin holes align.
- Insert standard 0.154" Mil-Spec hammer and trigger pins through the receiver walls and cassette bores (or torque anti-walk pin screws to manufacturer specification, typically 10–12 in-lbs with blue threadlocker).
- Perform a complete armorer function check: verify the safety selector engages smoothly with the hammer cocked, confirm the hammer does not fall on SAFE, pull and hold the trigger on FIRE to verify hammer release, cycle the hammer to confirm disconnector capture, and verify clean reset upon trigger release before live-fire staging.
Key Features
- Zero Creep Technology™: Patented free-floating roller sear eliminates sliding friction for a true 0.000-inch creep, glass-rod single-stage break at a fixed 3.5 lb pull weight.
- Full-Power Hammer Strike: FLTWR™ flat-wire mainspring architecture delivers full primer ignition energy for 5.56 NATO and hard-primered duty ammunition without light-strike compromises.
- Tactile Duty Reset & Low Overtravel: TKR™ internal geometry restricts overtravel to 0.060 inches with a positive 0.070-inch mid-force reset tailored for high-stress CQB and rapid cadence shooting.
- Straight Flat Trigger Lever: Vertical flat shoe profile promotes consistent finger placement, lower perceived pull weight, and straight-back trigger press mechanics.
- Hardened 440C Stainless & PVD Construction: Precision 440C stainless steel internal components housed in an EZAC die-cast chassis with a wear-resistant PVD Black external finish.
Product Specifications
- Brand: TriggerTech®
- Model/Series: AR-15 Duty Trigger (Single-Stage)
- MPN / SKU: AH0-SDB-33-NNF / AH0SDB33NNF
- UPC: 885768003520
- Action Type: Single-Stage (Non-Adjustable Drop-In Cassette)
- Pull Weight: 3.5 lbs (Fixed)
- Trigger Bow Style: Straight Flat
- Creep / Overtravel / Reset: 0.000" / 0.060" / 0.070"
- Pin Diameter: Standard Mil-Spec 0.154" (Pins Not Included)
- Materials & Finish: EZAC Die-Cast Housing, 440C Stainless Steel Internals, PVD Black
- Platform Compatibility: Mil-Spec AR-15 / M4 Lower Receivers
- Country of Origin: Canada / USA