True Precision SIG P365 XL XMACRO Coated OEM Extractor Kit Gold TiN KIT 365 EXTRACTOR G UPC 810114622416
Product Description
The True Precision® Coated OEM Extractor Kit (SKU: KIT-365-EXTRACTOR-G / UPC: 810114622416) delivers a drop-in reliability and cosmetic upgrade for 9mm SIG Sauer® P365, P365X, P365XL, and P365-XMACRO pistols. Engineered to eliminate extraction sluggishness caused by heavy carbon buildup and brass shavings, this complete 3-piece assembly pairs genuine factory SIG Sauer® internal components with True Precision's signature high-lubricity PVD Gold Titanium Nitride (TiN) finish.
Beginning with factory-spec 17-4 PH stainless steel OEM hardware, True Precision strips and coats the extractor claw and cross-pin in a dense, ultra-hard Titanium Nitride layer. Achieving a surface hardness exceeding 80 HRC (~2,300 Vickers), the Gold TiN barrier drastically reduces sliding friction inside the slide's extractor tunnel while preventing baked-on carbon, unburned powder, and corrosive moisture from adhering to the extractor hook during high-round-count training or daily concealed carry.
Each kit ships complete with the Gold TiN-coated OEM extractor, matching Gold TiN-coated extractor retention pin, and a fresh OEM extractor spring to restore positive rim engagement and crisp, consistent ejection patterns. Whether refreshing a high-mileage EDC slide or color-matching a custom build alongside a True Precision Gold TiN barrel, this assembly installs without hand-fitting or slide modification.
*Armorer Bench Notes & Real-World Staging Guidance:*
Fitment Matrix: Direct drop-in fit for 9mm SIG Sauer P365, P365X, P365XL, P365-XMACRO, P365 SAS, and P365-AXG Legion slides. CRITICAL EXCLUSION: Will NOT fit .380 ACP P365-380 models or P320 pistols. When driving the extractor pin, support the slide on a non-marring bench block and ensure the extractor spring does not kink or bind inside the blind bore; apply a single drop of light CLP only to the pivot bore and keep the extractor claw face dry.
- Ensure the host firearm is completely clear, magazine removed, and chamber visually and physically verified empty before removing the slide assembly from the grip module.
- Remove the recoil spring assembly, barrel, and slide backplate, then relieve tension on the striker assembly and remove it from the slide channel.
- Using a 1/16" (1.5mm) roll pin punch, press the factory extractor retention pin downward from the top of the slide while maintaining thumb pressure over the extractor to capture the spring.
- Inspect and thoroughly clean the slide's extractor channel with solvent and a nylon brush, then insert the new OEM extractor spring and Gold TiN extractor into position.
- Depress the extractor inward to align the pin holes, tap the Gold TiN retention pin flush with the slide surface, reassemble the slide, and verify positive snap-cap extraction before live-fire staging.
Key Features
- Genuine SIG Sauer® OEM Components: Built from factory-spec 17-4 PH stainless steel extractor hardware to guarantee exact claw geometry, rim engagement, and zero-fitment drop-in reliability.
- PVD Gold Titanium Nitride (TiN) Coating: Ultra-hard ceramic-metallic finish resists abrasive wear, prevents carbon fouling adhesion, and adds a durable metallic gold accent visible through the ejection port.
- Complete 3-Piece Rebuild Assembly: Includes the coated extractor, coated retention cross-pin, and a new factory extractor spring for a full extraction system refresh.
- Full 9mm P365 Family Compatibility: Engineered to fit standard P365, P365X, P365XL, P365-XMACRO, and AXG Legion 9mm slides, including factory optic-ready and aftermarket True Precision slides.
- Corrosion & Solvent Resistance: Impervious to sweat, humidity, and harsh bore cleaners, making it ideal for daily appendix or inside-the-waistband concealed carry.
Product Specifications
- Brand: True Precision®
- Model/Series: Coated OEM Extractor Kit
- MPN / SKU: KIT-365-EXTRACTOR-G / KIT365EXTRACTORG
- UPC: 810114622416
- Material: 17-4 PH Stainless Steel (Extractor & Pin) / Chrome-Silicon Wire (Spring)
- Finish / Coating: PVD Gold Titanium Nitride (TiN)
- Included Components: 1x Coated Extractor, 1x Coated Extractor Pin, 1x OEM Extractor Spring
- Platform Compatibility: SIG Sauer® P365, P365X, P365XL, P365-XMACRO, P365 SAS, P365-AXG Legion (9mm Only)
- Country of Origin: United States