*CONTACT US FOR A SPECIAL COUPON CODE*
Tyrant CNC Extended Slide Release Gray for Glock Gen5 9mm TD GSTOP 5 G UPC 7426848614170
Product Description
The Tyrant CNC Extended Slide Release for Glock Gen5 9mm Handguns (MPN: TD-GSTOP-5-G) is a custom, high-speed ergonomic control component engineered to facilitate faster slide manipulations, positive thumb engagement, and effortless emergency lockbacks. Precision CNC-machined in the USA, this dual-component assembly pairs a stainless steel main body with raised aircraft-grade aluminum surface pads finished in a durable, hardcoat Anodized Matte Gray finish.
Designed with raised profile geometry and multi-directional surface serrations, the TD-GSTOP-5-G gives shooters added mechanical advantage without forcing adjustments to natural grip angles or firing stances. The ambidextrous paddle layout provides mirrored tactile contact points on both sides of the Gen5 receiver frame, enabling seamless one-handed slide releases during rapid tactical reloads under stress.
Engineered for drop-in installation on Glock Gen5 9mm receivers without modification, this component includes the factory-style integral torsion spring to ensure snappy return action and unyielding last-round slide lockup. Backed by Tyrant CNC's Lifetime Warranty, it delivers a sleek, low-visibility tactical upgrade for your custom Gen5 handgun build.
Armorer Bench Notes & Real-World Staging Guidance:
Fitment Matrix: Fits Glock Generation 5 9mm models including G17 Gen5, G19 Gen5, G19X, G26 Gen5, G34 Gen5 MOS, G45, and G47. (Note: Not compatible with Gen 1–4 frames due to different spring geometry, nor compatible with .40 S&W Gen5 G22/G23 models, slimline G43/43X/48, or .45 ACP/10mm frames).
- Perform a complete firearm safety check: drop the magazine, lock the slide rearward, and visually inspect the chamber to verify zero live rounds are present.
- Field strip the pistol by removing the slide assembly from the frame rails.
- Using a 3/32" steel punch, push out the rear Housing Pin and main Trigger Pin from left to right. (Wiggle the stock slide stop lever gently to align the internal tension wire/detent with the pin grooves).
- Lift the factory slide stop lever upward and out of the lower receiver housing slot.
- Drop the Tyrant CNC TD-GSTOP-5-G Extended Slide Release into the slot, verifying the integral spring leg rests properly underneath the internal locking block ledge.
- Reinstall the Trigger Pin from left to right while wiggling the lever until the pin seats fully through the assembly.
- Reassemble the slide onto the frame and perform a complete function test: rack the slide rearward on an empty magazine to test slide lockup, then press down on the gray anodized lever to verify smooth, positive slide release action.
Key Features
- Precision CNC-Machined Construction: Stainless steel body paired with aircraft-grade aluminum pads for maximum structural rigidity and long service life.
- Raised Ergonomic Paddle Profile: Provides extended surface area and extra leverage for effortless one-thumb slide release manipulations.
- Durable Anodized Gray Finish: Premium hardcoat anodizing provides excellent surface scratch resistance and a subtle custom aesthetic.
- Aggressive Surface Texture: Multi-directional serrations ensure non-slip thumb contact under wet, sweaty, or gloved operational conditions.
- Ambidextrous Dual-Paddle Geometry: Retains full Gen5 ambidextrous functionality for both left- and right-handed manipulation.
- Tyrant CNC Lifetime Warranty: American-made craftsmanship backed by Tyrant's full lifetime factory replacement warranty.
Product Specifications
- Brand: Tyrant CNC (Tyrant Designs)
- Model/Series: Gen5 Extended Slide Release
- MPN / SKU: TD-GSTOP-5-G
- UPC: 7426848614170
- Caliber: 9mm Luger / 9x19mm NATO
- Platform Compatibility: Glock Gen5 9mm (G17 Gen5, G19 Gen5, G19X, G26 Gen5, G34 Gen5 MOS, G45, G47)
- Material: CNC Stainless Steel & Aircraft Aluminum
- Finish / Color: Anodized Matte Gray / Black Steel Body
- Weight: 0.4 oz
- Country of Origin: USA
