Tyrant CNC Glock 43X / Glock 48 Plus 4 Magazine Extension - Fits OEM Glock Slimline 9mm Magazines, Plus 4 Round Capacity Boost, Rapid Detach Toolless Plunger Retention, 6061-T6 Aluminum, Anodized Black Finish - TD-G43MAGEX-BLK / 7426848612602
Product Description
Upgrading a slimline concealed carry pistol, compact defensive platform, or everyday carry (EDC) magazine staging array requires extension modules built to absolute locking and parsing tolerances. Factory micro-compact payloads limit field options, while low-grade polymer extensions often lack internal rigidity, flexing under full spring tension and leading to follower binding or failure-to-feed hang-ups on your bench. The **Tyrant CNC® Glock 43X & Glock 48 +4 Magazine Extension (TD-G43MAGEX-BLK / 7426848612602)** completely flatlines these capacity limitations and structural vulnerabilities. It delivers a premium **plus-four capacity boost** matched with an innovative, toolless rapid-detach anchor layout.
Proudly engineered, CNC-machined, and performance-verified in the United States by Tyrant CNC, this high-strength ergonomic enhancement is carved from a solid block of high-tensile **6061-T6 structural aircraft-grade aluminum alloy** finished in a deep, non-reflective matte black anodized dressing. The core engineering choice features a proprietary **spring-loaded retention plunger pin design**, allowing armorers to slide the extension onto the factory magazine tabs and lock it instantly without clumsy set screws or loose retaining plates. Adding an extra 4 rounds of 9mm Luger ammunition to your payload, the extended profile creates a perfect lower grip extension, providing maximum hand surface area to control muzzle flip during rapid fire straight from your workbench.
Engineered to slide cleanly onto standard factory OEM Glock 43X and Glock 48 single-stack style magazines, this factory-calibrated metal extension ensures absolute mechanical synchronization directly from your workspace bench.
*Armorer Bench Notes & Real-World Slimline Magazine Staging Guidance: The Tyrant CNC TD-G43MAGEX-BLK enhancement block arrives workspace ready, containing the anodized aluminum extension base, a custom-wound high-tensile heat-treated steel extended magazine spring, and the pre-installed plunger retention lock. PROPRIETARY GLOCK SLIMLINE OEM INTERFACE MATRIX: The upper mounting tracks are engineered natively, strictly, and dimensionally to slide onto **factory original Glock OEM 43X and Glock 48 9mm magazine bodies**. *Magazine Compatibility Cross-Reference Checklist:* Verify on your armorer bench that you are utilizing original polymer-jacketed Glock steel tubes—this precise tracking channel is **NOT designed to interface with aftermarket steel Shield Arms S15 magazines or generic sheet metal variants**. It is also **NOT compatible with standard sub-compact Glock 43 magazines**, which feature a distinct shorter floorplate tracking footprint. Armorer Workbench Custom Staging Sequence: 1. Visually and physically confirm your host Glock 43X/48 pistol is completely clear of live ammunition, the magazine is removed, and the frame chamber area is verified empty and safe. 2. Secure a punch tool to press the factory magazine inner base insert pin downward through the access hole in the bottom of the stock plastic floorplate. 3. Carefully slide the stock baseplate forward off the tracking tabs, keeping your thumb firmly over the bottom opening to trap the compressed factory spring inside the tube cavity. 4. Extract the original spring and plastic floorplate insert, clean the inner magazine walls with a dry nylon cleaning brush, and slide in the new custom-wound extended spring provided in the Tyrant kit. 5. Compress the extended spring upward inside the tube, hold it flush with the base rim, and depress the cross-plunger pin on the back side of the Tyrant aluminum extension. 6. Slide the aluminum extension onto the magazine body rails from front to back until it clicks loudly into battery, then pull down firmly to verify the retention plunger pin has locked completely home into the rear indexing slot before loading downrange.*
Key Features
- Plus 4 Round Capacity Boost: Safely increases your factory single-stack style payload from 10 rounds to 14 rounds of 9mm ammunition, providing a critical tactical advantage.
- Toolless Rapid Detach Plunger: Features a clean, spring-loaded cross-pin detent system that allows lightning-fast field stripping and spring maintenance without loose tools or screws.
- Milled 6061-T6 Aluminum Core: Precision CNC-machined from solid billet aircraft structural aluminum alloy, ensuring it won\'t split or warp when dropped on hard concrete surfaces.
- Enhanced Grip Profile Extension: The extended bottom geometry acts as an ergonomic grip weld, adding crucial surface area for a full master grip to tame snappy slimline recoil.
- Anodized Matte Black Armor Finish: Encased in a deep, non-reflective hard anodized protective skin that shrugs off abrasive trail scratches, holster friction, and harsh chemical solvents.
- Custom High-Tensile Spring Included: Bundles a custom-calibrated, extra-length steel magazine spring to guarantee perfect upward feeding pressure down to the final round.
Product Specifications
- Brand: Tyrant CNC® / Tyrant Designs (Chicago, Illinois / Sourced US Materials)
- Model Line: High-Performance Specialized Pistol Components & Magazine Extension Arrays
- MPN/SKU Code: TD-G43MAGEX-BLK (Glock 43X/48 Plus 4 Extension Anodized Black Base SKU)
- UPC Code Profile: 7426848612602
- Firearm Model Compatibility: Glock 43X and Glock 48 Slimline 9mm Pistols Natively
- Magazine Tube Fitment Standard: OEM Factory Glock 43X/48 Polymer-Jacketed Steel Magazines Only
- Ammunition Caliber Staging: 9mm NATO / 9x19mm Luger Centerfire Ammunition Columns
- Volumetric Payload Increase: Adds Exactly +4 Additional Rounds to the Factory Magazine Base Capacity
- Structural Material Base: Precision CNC-Machined Solid 6061-T6 Aircraft Grade Structural Aluminum Billet
- Exterior Finish Dressing: High-Durability Matte Black Hard-Coat Anodized Anti-Reflective Shield
- Retention Mechanism Type: Proprietary Toolless Spring-Loaded Mechanical Locking Plunger Pin Array
- Full Kit Component Checklist: 1x Plus 4 Aluminum Base Extension, 1x Custom High-Power Magazine Spring Only
- Packaging Format Class: Factory Original Sealed Tyrant CNC Branded Retail Clamshell or Zip Box
- Product Type Category: Handgun Accessories / Magazine Floorplates & Extended Basepads
- Overall Structural Unit Width: ~0.98 Inches (~24.8 mm matching Slimline Grip Profile)
- Overall Vertical Extension Footprint: ~1.25 Inches (~31.7 mm Ergo Lower Protrusion Height Axis)
- Net System Operating Mass: ~1.10 Ounces (~31.1 Grams Lightweight Balanced Aluminum Weight)
- Global Quality Certifications: Formulated to Rigid US Commercial and EDC Duty Print Standards
- Warranty Tracking Protection: Fully Backed by Tyrant CNC Lifetime Factory Product Performance Guarantee
