*CONTACT US FOR A SPECIAL COUPON CODE*
Warne Generation 2 Extended Skeletonized 30mm MSR Mount Black XSKEL30TW WRXSKEL30TW UPC 656813104895
Product Description
The Warne® Generation 2 Extended Skeletonized 30mm MSR Mount (SKU: XSKEL30TW / WRXSKEL30TW / UPC: 656813104895) is a rigid, one-piece cantilever optic mounting solution engineered specifically for Modern Sporting Rifles (MSRs) including AR-15, M4, AR-10, SR-25, and LR-308 platforms. Built upon Warne's proven R.A.M.P. mount architecture, this Gen 2 platform positions 30mm Low Power Variable Optics (LPVOs) and mid-to-long-range tactical scopes at the 1.435-inch MSR Ideal Height while projecting the optic more than 2 inches forward for proper eye relief and nose-to-charging-handle shooting postures.
Precision CNC-machined in the USA from solid 6061-T6 billet aluminum, the X-SKEL Gen 2 utilizes strategic skeletonization across the main body and ring caps to cut overall mass by more than 30 percent—bringing net weight down to 6.7 ounces without sacrificing structural reliability under recoil. High-stress clamping points are reinforced with pressed-in steel threaded inserts to eliminate galling or thread stripping in the aluminum host body, while the Matte Black anodized finish resists abrasion, corrosion, and harsh gun-cleaning solvents.
Designed for hard-use duty, 3-Gun competition, and precision carbine builds, the one-piece side clamp locks onto any MIL-STD-1913 Picatinny rail at least 3.0 inches in length via dual 1/2-inch tactical hex nuts. The 3.050-inch inner ring spacing accommodates long turret housings and magnification throw levers, while the 2-inch forward cantilever keeps the mount base anchored cleanly on the upper receiver without bridging onto a free-float handguard.
*Armorer Bench Notes & Real-World Staging Guidance:*
Fitment Matrix: Fits all 30mm tube diameter riflescopes (24mm to 56mm objective lenses) mounted on AR-15, M4, AR-10, SR-25, DPMS LR-308, and PTR-91 platforms with at least 3.0 inches of MIL-STD-1913 Picatinny upper receiver rail. CRITICAL: This is the fixed dual-nut XSKEL30TW (0 MOA cant), NOT the Quick-Detach lever model (QDXSKEL30TW), and will NOT fit 1-inch or 34mm optic tubes. Never bridge the mount across the upper receiver and handguard seam. Torque the dual 1/2-inch base tactical nuts to 65 in-lbs and the #8 Torx ring cap screws in an alternating criss-cross pattern to a maximum of 25 in-lbs on dry, unlubricated threads.
- Ensure the host firearm is completely clear, magazine removed, and chamber visually and physically verified empty before beginning installation.
- Degrease the upper receiver MIL-STD-1913 Picatinny rail slots and the underside of the X-SKEL mount base, then seat the mount forward against the receiver recoil lugs without bridging onto the handguard.
- Install the one-piece side clamp and torque both 1/2-inch tactical hex nuts evenly to 65 in-lbs using a calibrated inch-pound torque wrench.
- Set the 30mm optic inside the lower ring cradles, adjust forward/aft position for full-field eye relief at maximum magnification, plumb the reticle to the receiver, and install the skeletonized top caps with the included #8 Torx screws.
- Tighten the #8 Torx ring cap screws gradually in a criss-cross pattern up to 25 in-lbs maximum (never exceeding the optic manufacturer's tube torque limit), verify even cap gaps, and confirm zero at the range.
Key Features
- Extended 2-Inch Forward Cantilever: Adds an extra inch of forward reach over the original SKEL design to achieve ideal eye relief with LPVOs and tactical optics on AR-15 and AR-10 receivers.
- Lightweight Skeletonized 6061-T6 Chassis: Precision CNC-machined aluminum body and caps shed over 30 percent of excess weight (6.7 oz total) while maintaining rock-solid zero retention.
- Steel Threaded Ring Inserts: Pressed-in steel thread inserts reinforce the included #8 Torx cap screws to prevent thread stripping under repeated optic swaps and heavy recoil.
- 1.435-Inch MSR Ideal Optical Height: Places the 30mm scope centerline at optimal cheek-weld height for flat-top AR upper receivers while clearing objectives up to 56mm.
- Dual 1/2-Inch Tactical Nut Clamp: Full-length one-piece Picatinny side clamp delivers repeatable, high-clamping-force lockup at 65 in-lbs of torque.
Product Specifications
- Brand: Warne® Scope Mounts
- Model/Series: Generation 2 X-SKEL Extended Skeletonized MSR Mount
- MPN / SKU: XSKEL30TW / WRXSKEL30TW
- UPC: 656813104895
- Tube Diameter: 30mm
- Elevation Cant: 0 MOA
- Optical Centerline Height: 1.435" (MSR Ideal Height)
- Ring Width / Spacing: 0.750" Ring Width / 3.050" Between Rings
- Material & Finish: CNC-Machined 6061-T6 Aluminum / Matte Black Finish
- Base Clamping Torque: 65 in-lbs (Dual 1/2" Tactical Nuts)
- Ring Cap Torque: 25 in-lbs Max (#8 Torx Fasteners with Steel Inserts)
- Platform Compatibility: AR-15, M4, AR-10, SR-25, LR-308, PTR-91 (MIL-STD-1913 Picatinny)
- Country of Origin: Made in the USA