Warne Scope Mounts

Warne Vapor 1-Piece Picatinny Base Tikka T3 T3x 20 MOA Black - V4T3-20MOA

MSRP: $50.00
$39.99
( saved $10.01 )
No reviews yet Write a Review
Adding to cart… The item has been added
SKU:
171349-1
UPC:
030317011864
  • $7.95 Flat Rate Shipping

  • Easy Returns

  • Safe Payments

  • The Best Products

Warne Vapor 1 Piece Base 20 MOA Fits Tikka T3 Matte Finish Black V4T3 20MOA UPC 656813113897

Product Description

The Warne® Vapor 1-Piece 20 MOA Picatinny Base (SKU: V4T3-20MOA / UPC: 656813113897) delivers an affordable, precision-machined optical mounting foundation built specifically for Tikka T3 and Tikka T3x bolt-action rifles. Engineered with an integral 20 MOA forward cant, this rail pitches the scope axis downward to unlock additional internal elevation travel—enabling hunters and long-range marksmen to dial past 600 yards without exhausting erector adjustment.

Precision CNC-machined from solid 6061-T6 aircraft-grade aluminum, the Vapor series base balances featherweight 1.7-ounce carry efficiency with dependable structural rigidity. A Mil-Spec hardcoat anodized matte black finish shields the aluminum substrate from surface abrasion, harsh weather, and aggressive cleaning solvents while eliminating downrange glare.

Designed to full NATO-STANAG and MIL-STD-1913 specifications, the continuous cross-slot rail securely interfaces with both Picatinny and Weaver-style scope rings while spanning the ejection port for maximum ring spacing and eye-relief flexibility. Included self-centering tapered #6-48 T-15 Torx fasteners ensure repeatable, stress-free alignment directly onto factory-drilled Tikka receivers.

*Armorer Bench Notes & Real-World Staging Guidance:*

Fitment Matrix: Direct fit for standard Tikka T3 and Tikka T3x centerfire bolt-action receivers (right- and left-hand models). CRITICAL EXCLUSION: Do NOT install on the Tikka T3x TAC A1, as the rail height will not align properly with the factory TAC A1 handguard top rail; NOT compatible with Tikka T1x rimfire or Sako tapered dovetail receivers. Ensure the 20 MOA cant slopes downward toward the muzzle. Torque self-centering tapered #6-48 T-15 Torx screws to 15–18 in-lbs using a calibrated torque driver with a single drop of removable blue threadlocker (Loctite 242/243) on degreased threads.

  1. Ensure the host rifle is completely unloaded, magazine removed, bolt withdrawn, and chamber visually and physically verified clear.
  2. Degrease the Tikka T3/T3x receiver top bridge, factory #6-48 threaded holes, and underside of the Warne rail using acetone or non-chlorinated brake cleaner to remove factory preservative oils.
  3. Place the Vapor 1-piece base onto the receiver bridge, verifying that the thicker rear section and thinner front section slope downward toward the muzzle for proper +20 MOA elevation gain.
  4. Apply a minimal drop of blue threadlocker to the supplied self-centering tapered #6-48 T-15 Torx screws, start each screw by hand to prevent cross-threading, and torque evenly in an alternating sequence to 15–18 in-lbs.
  5. Cycle the bolt to verify smooth operation without screw protrusion into the action or barrel tenon, install rings and optic to manufacturer torque specs, and confirm zero on the range.

Key Features

  • Built-In 20 MOA Elevation Cant: Provides 20 minutes of angle downward inclination to maximize usable riflescope elevation adjustment for extended-range shooting.
  • 6061-T6 Billet Aluminum Construction: Precision CNC-machined from 6061-T6 aluminum for a lightweight 1.7 oz profile with reliable recoil resistance.
  • NATO-STANAG, Picatinny & Weaver Compatible: Continuous cross-slot geometry accepts MIL-STD-1913 Picatinny, STANAG, and Weaver-style rings.
  • Self-Centering Tapered T-15 Torx Hardware: Includes tapered #6-48 Torx mounting screws engineered to automatically center the rail over the receiver bore axis.
  • Mil-Spec Hardcoat Anodized Finish: Matte black hardcoat anodizing resists scratching, corrosion, and glare in demanding field environments.

Product Specifications

  • Brand: Warne®
  • Model/Series: Vapor 1-Piece Picatinny Rail
  • MPN / SKU: V4T3-20MOA / WRV4T3-20MOA
  • UPC: 656813113897
  • Material: 6061-T6 Aluminum
  • Finish: Mil-Spec Hardcoat Anodized Matte Black
  • Elevation Cant: 20 MOA
  • Mounting Hardware: Tapered #6-48 T-15 Torx Screws
  • Ring Compatibility: MIL-STD-1913 Picatinny, NATO-STANAG & Weaver
  • Platform Compatibility: Tikka T3 & Tikka T3x (Excludes T3x TAC A1)
  • Country of Origin: USA